This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.0
More details
| Board | Claims compatibility | Inclusion | Example2a-Read_GPIO |
Example2b-Read_GPIO_Port |
Example3a-Inversion |
Example3b-Inversion_Port |
Example4-Interrupt |
Example1a-Write_GPIO |
Example1b-Write_GPIO_Port |
|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | PASS | FAIL | PASS | FAIL | FAIL | PASS | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | PASS | FAIL | PASS | FAIL | PASS | PASS | PASS |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | PASS | FAIL | PASS | FAIL | FAIL | PASS | PASS |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
Result: PASS
Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes. Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 3936 bytes (12%) of program storage space. Maximum is 32256 bytes. Global variables use 497 bytes (24%) of dynamic memory, leaving 1551 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 4006 bytes (12%) of program storage space. Maximum is 32256 bytes. Global variables use 509 bytes (24%) of dynamic memory, leaving 1539 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 4332 bytes (13%) of program storage space. Maximum is 32256 bytes. Global variables use 495 bytes (24%) of dynamic memory, leaving 1553 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example2b-Read_GPIO_Port/Example2b-Read_GPIO_Port.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example2b-Read_GPIO_Port/Example2b-Read_GPIO_Port.ino:27:20: error: no matching function for call to 'TwoWire::begin(int, int)'
Wire.begin(23, 22);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example2b-Read_GPIO_Port/Example2b-Read_GPIO_Port.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:53:10: note: candidate: void TwoWire::begin()
void begin();
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:53:10: note: candidate expects 0 arguments, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:54:10: note: candidate: void TwoWire::begin(uint8_t)
void begin(uint8_t);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:54:10: note: candidate expects 1 argument, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:55:10: note: candidate: void TwoWire::begin(int)
void begin(int);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:55:10: note: candidate expects 1 argument, 2 provided
Result: PASS
Sketch uses 4388 bytes (13%) of program storage space. Maximum is 32256 bytes. Global variables use 509 bytes (24%) of dynamic memory, leaving 1539 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example3b-Inversion_Port/Example3b-Inversion_Port.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example3b-Inversion_Port/Example3b-Inversion_Port.ino:29:20: error: no matching function for call to 'TwoWire::begin(int, int)'
Wire.begin(23, 22);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example3b-Inversion_Port/Example3b-Inversion_Port.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:53:10: note: candidate: void TwoWire::begin()
void begin();
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:53:10: note: candidate expects 0 arguments, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:54:10: note: candidate: void TwoWire::begin(uint8_t)
void begin(uint8_t);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:54:10: note: candidate expects 1 argument, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:55:10: note: candidate: void TwoWire::begin(int)
void begin(int);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:55:10: note: candidate expects 1 argument, 2 provided
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example4-Interrupt/Example4-Interrupt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example4-Interrupt/Example4-Interrupt.ino:38:57: error: 'ISR' was not declared in this scope
attachInterrupt(digitalPinToInterrupt(INTERRUPT_PIN), ISR, FALLING);
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example4-Interrupt/Example4-Interrupt.ino:38:57: note: suggested alternative: 'MISO'
attachInterrupt(digitalPinToInterrupt(INTERRUPT_PIN), ISR, FALLING);
^~~
MISO
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/cores/arduino/Arduino.h:30:0,
from /tmp/arduino-sketch-DC593B0AF1F8AECF07274980ED3F55C1/sketch/Example4-Interrupt.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example4-Interrupt/Example4-Interrupt.ino: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example4-Interrupt/Example4-Interrupt.ino:63:6: error: expected unqualified-id before string constant
void ISR() {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example4-Interrupt/Example4-Interrupt.ino:63:6: error: expected unqualified-id before 'void'
void ISR() {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example4-Interrupt/Example4-Interrupt.ino:63:6: error: expected ')' before 'void'
Result: PASS
Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 82072 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44236 bytes (16%) of dynamic memory, leaving 226100 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 82086 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44244 bytes (16%) of dynamic memory, leaving 226092 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 82108 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44236 bytes (16%) of dynamic memory, leaving 226100 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example2b-Read_GPIO_Port/Example2b-Read_GPIO_Port.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example2b-Read_GPIO_Port/Example2b-Read_GPIO_Port.ino:27:20: error: no matching function for call to 'arduino::MbedI2C::begin(int, int)'
Wire.begin(23, 22);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example2b-Read_GPIO_Port/Example2b-Read_GPIO_Port.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:39:18: note: candidate: virtual void arduino::MbedI2C::begin()
virtual void begin();
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:39:18: note: candidate expects 0 arguments, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:43:18: note: candidate: virtual void arduino::MbedI2C::begin(uint8_t)
virtual void begin(uint8_t address);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:43:18: note: candidate expects 1 argument, 2 provided
Result: PASS
Sketch uses 82146 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44236 bytes (16%) of dynamic memory, leaving 226100 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example3b-Inversion_Port/Example3b-Inversion_Port.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example3b-Inversion_Port/Example3b-Inversion_Port.ino:29:20: error: no matching function for call to 'arduino::MbedI2C::begin(int, int)'
Wire.begin(23, 22);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example3b-Inversion_Port/Example3b-Inversion_Port.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:39:18: note: candidate: virtual void arduino::MbedI2C::begin()
virtual void begin();
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:39:18: note: candidate expects 0 arguments, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:43:18: note: candidate: virtual void arduino::MbedI2C::begin(uint8_t)
virtual void begin(uint8_t address);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:43:18: note: candidate expects 1 argument, 2 provided
Result: PASS
Sketch uses 83512 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44496 bytes (16%) of dynamic memory, leaving 225840 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/src/SparkFun_TCA9534.h:29:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/src/SparkFun_TCA9534.cpp:17:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t TCA9534::readRegister(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 5323 bytes (10%) of program storage space. Maximum is 49152 bytes.
Global variables use 491 bytes (7%) of dynamic memory, leaving 5653 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/src/SparkFun_TCA9534.h:29:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/src/SparkFun_TCA9534.cpp:17:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t TCA9534::readRegister(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 5394 bytes (10%) of program storage space. Maximum is 49152 bytes.
Global variables use 507 bytes (8%) of dynamic memory, leaving 5637 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/src/SparkFun_TCA9534.h:29:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/src/SparkFun_TCA9534.cpp:17:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t TCA9534::readRegister(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 5378 bytes (10%) of program storage space. Maximum is 49152 bytes.
Global variables use 491 bytes (7%) of dynamic memory, leaving 5653 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/src/SparkFun_TCA9534.h:29:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/src/SparkFun_TCA9534.cpp:17:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t TCA9534::readRegister(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example2b-Read_GPIO_Port/Example2b-Read_GPIO_Port.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example2b-Read_GPIO_Port/Example2b-Read_GPIO_Port.ino:27:20: error: no matching function for call to 'TwoWire::begin(int, int)'
Wire.begin(23, 22);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example2b-Read_GPIO_Port/Example2b-Read_GPIO_Port.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:52:10: note: candidate: virtual void TwoWire::begin()
void begin();
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:52:10: note: candidate expects 0 arguments, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:53:10: note: candidate: virtual void TwoWire::begin(uint8_t)
void begin(uint8_t);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:53:10: note: candidate expects 1 argument, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:54:10: note: candidate: void TwoWire::begin(int)
void begin(int);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:54:10: note: candidate expects 1 argument, 2 provided
Result: PASS
Sketch uses 5435 bytes (11%) of program storage space. Maximum is 49152 bytes.
Global variables use 491 bytes (7%) of dynamic memory, leaving 5653 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/src/SparkFun_TCA9534.h:29:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/src/SparkFun_TCA9534.cpp:17:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t TCA9534::readRegister(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example3b-Inversion_Port/Example3b-Inversion_Port.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example3b-Inversion_Port/Example3b-Inversion_Port.ino:29:20: error: no matching function for call to 'TwoWire::begin(int, int)'
Wire.begin(23, 22);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example3b-Inversion_Port/Example3b-Inversion_Port.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:52:10: note: candidate: virtual void TwoWire::begin()
void begin();
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:52:10: note: candidate expects 0 arguments, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:53:10: note: candidate: virtual void TwoWire::begin(uint8_t)
void begin(uint8_t);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:53:10: note: candidate expects 1 argument, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:54:10: note: candidate: void TwoWire::begin(int)
void begin(int);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:54:10: note: candidate expects 1 argument, 2 provided
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example4-Interrupt/Example4-Interrupt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example4-Interrupt/Example4-Interrupt.ino:38:57: error: 'ISR' was not declared in this scope
attachInterrupt(digitalPinToInterrupt(INTERRUPT_PIN), ISR, FALLING);
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example4-Interrupt/Example4-Interrupt.ino:38:57: note: suggested alternative: 'MISO'
attachInterrupt(digitalPinToInterrupt(INTERRUPT_PIN), ISR, FALLING);
^~~
MISO
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:27:0,
from /tmp/arduino-sketch-DC593B0AF1F8AECF07274980ED3F55C1/sketch/Example4-Interrupt.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example4-Interrupt/Example4-Interrupt.ino: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example4-Interrupt/Example4-Interrupt.ino:63:6: error: expected unqualified-id before string constant
void ISR() {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example4-Interrupt/Example4-Interrupt.ino:63:6: error: expected unqualified-id before 'void'
void ISR() {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_Qwiic_GPIO_TCA9534_Arduino_Library/examples/Example4-Interrupt/Example4-Interrupt.ino:63:6: error: expected ')' before 'void'
Result: PASS
Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 14080 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3580 bytes (10%) of dynamic memory, leaving 29188 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 14104 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3604 bytes (10%) of dynamic memory, leaving 29164 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 14116 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3580 bytes (10%) of dynamic memory, leaving 29188 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 14396 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3604 bytes (10%) of dynamic memory, leaving 29164 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 14164 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3580 bytes (10%) of dynamic memory, leaving 29188 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 14352 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3604 bytes (10%) of dynamic memory, leaving 29164 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 14724 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3748 bytes (11%) of dynamic memory, leaving 29020 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 202682 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 213326 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14144 bytes (4%) of dynamic memory, leaving 313536 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 213362 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14168 bytes (4%) of dynamic memory, leaving 313512 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 213730 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14144 bytes (4%) of dynamic memory, leaving 313536 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 213930 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14168 bytes (4%) of dynamic memory, leaving 313512 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 213806 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14144 bytes (4%) of dynamic memory, leaving 313536 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 213898 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14168 bytes (4%) of dynamic memory, leaving 313512 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 214286 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14656 bytes (4%) of dynamic memory, leaving 313024 bytes for local variables. Maximum is 327680 bytes.