SparkFun SCD30 Arduino Library - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

SparkFun SCD30 Arduino Library

Version: 1.0.17
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	Example1_BasicReadings	Example2_SetOptions	Example3_WireOptions	Example4_EnableCalibrate	Example5_GetSettings
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	FAIL	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	PASS	PASS	FAIL	PASS	PASS
arduino:megaavr:nona4809 1.8.7	Yes	PASS	PASS	PASS	FAIL	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	PASS	FAIL	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	PASS	PASS	PASS	PASS	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/Example1_BasicReadings

Result: PASS

Sketch uses 8378 bytes (25%) of program storage space. Maximum is 32256 bytes.
Global variables use 562 bytes (27%) of dynamic memory, leaving 1486 bytes for local variables. Maximum is 2048 bytes.

examples/Example2_SetOptions

Result: PASS

Sketch uses 8792 bytes (27%) of program storage space. Maximum is 32256 bytes.
Global variables use 610 bytes (29%) of dynamic memory, leaving 1438 bytes for local variables. Maximum is 2048 bytes.

examples/Example3_WireOptions

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/examples/Example3_WireOptions/Example3_WireOptions.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/examples/Example3_WireOptions/Example3_WireOptions.ino:31:3: error: 'Wire1' was not declared in this scope
   Wire1.begin(); //Start the wire hardware that may be supported by your platform
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/examples/Example3_WireOptions/Example3_WireOptions.ino:31:3: note: suggested alternative: 'Wire'
   Wire1.begin(); //Start the wire hardware that may be supported by your platform
   ^~~~~
   Wire

examples/Example4_EnableCalibrate

Result: PASS

Sketch uses 8464 bytes (26%) of program storage space. Maximum is 32256 bytes.
Global variables use 598 bytes (29%) of dynamic memory, leaving 1450 bytes for local variables. Maximum is 2048 bytes.

examples/Example5_GetSettings

Result: PASS

Sketch uses 9210 bytes (28%) of program storage space. Maximum is 32256 bytes.
Global variables use 942 bytes (45%) of dynamic memory, leaving 1106 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

examples/Example1_BasicReadings

Result: PASS

Sketch uses 85460 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44252 bytes (16%) of dynamic memory, leaving 226084 bytes for local variables. Maximum is 270336 bytes.

examples/Example2_SetOptions

Result: PASS

Sketch uses 87132 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44252 bytes (16%) of dynamic memory, leaving 226084 bytes for local variables. Maximum is 270336 bytes.

examples/Example3_WireOptions

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/examples/Example3_WireOptions/Example3_WireOptions.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/examples/Example3_WireOptions/Example3_WireOptions.ino:31:3: error: 'Wire1' was not declared in this scope
   Wire1.begin(); //Start the wire hardware that may be supported by your platform
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/examples/Example3_WireOptions/Example3_WireOptions.ino:31:3: note: suggested alternative: 'Wire'
   Wire1.begin(); //Start the wire hardware that may be supported by your platform
   ^~~~~
   Wire

examples/Example4_EnableCalibrate

Result: PASS

Sketch uses 85524 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44252 bytes (16%) of dynamic memory, leaving 226084 bytes for local variables. Maximum is 270336 bytes.

examples/Example5_GetSettings

Result: PASS

Sketch uses 85972 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44252 bytes (16%) of dynamic memory, leaving 226084 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/src/SparkFun_SCD30_Arduino_Library.h:40:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/src/SparkFun_SCD30_Arduino_Library.cpp:28:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'bool SCD30::readMeasurement()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'bool SCD30::getSettingValue(uint16_t, uint16_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint16_t SCD30::readRegister(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/Example1_BasicReadings

Result: PASS

Sketch uses 8974 bytes (18%) of program storage space. Maximum is 49152 bytes.
Global variables use 504 bytes (8%) of dynamic memory, leaving 5640 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/src/SparkFun_SCD30_Arduino_Library.h:40:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/src/SparkFun_SCD30_Arduino_Library.cpp:28:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'bool SCD30::readMeasurement()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'bool SCD30::getSettingValue(uint16_t, uint16_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint16_t SCD30::readRegister(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/Example2_SetOptions

Result: PASS

Sketch uses 9711 bytes (19%) of program storage space. Maximum is 49152 bytes.
Global variables use 504 bytes (8%) of dynamic memory, leaving 5640 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/src/SparkFun_SCD30_Arduino_Library.h:40:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/src/SparkFun_SCD30_Arduino_Library.cpp:28:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'bool SCD30::readMeasurement()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'bool SCD30::getSettingValue(uint16_t, uint16_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint16_t SCD30::readRegister(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/Example3_WireOptions

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/examples/Example3_WireOptions/Example3_WireOptions.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/examples/Example3_WireOptions/Example3_WireOptions.ino:31:3: error: 'Wire1' was not declared in this scope
   Wire1.begin(); //Start the wire hardware that may be supported by your platform
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/examples/Example3_WireOptions/Example3_WireOptions.ino:31:3: note: suggested alternative: 'Wire'
   Wire1.begin(); //Start the wire hardware that may be supported by your platform
   ^~~~~
   Wire

examples/Example4_EnableCalibrate

Result: PASS

Sketch uses 9060 bytes (18%) of program storage space. Maximum is 49152 bytes.
Global variables use 504 bytes (8%) of dynamic memory, leaving 5640 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/src/SparkFun_SCD30_Arduino_Library.h:40:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/src/SparkFun_SCD30_Arduino_Library.cpp:28:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'bool SCD30::readMeasurement()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'bool SCD30::getSettingValue(uint16_t, uint16_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint16_t SCD30::readRegister(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/Example5_GetSettings

Result: PASS

Sketch uses 10132 bytes (20%) of program storage space. Maximum is 49152 bytes.
Global variables use 504 bytes (8%) of dynamic memory, leaving 5640 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/src/SparkFun_SCD30_Arduino_Library.h:40:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/src/SparkFun_SCD30_Arduino_Library.cpp:28:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'bool SCD30::readMeasurement()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'bool SCD30::getSettingValue(uint16_t, uint16_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint16_t SCD30::readRegister(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.

examples/Example1_BasicReadings

Result: PASS

Sketch uses 25052 bytes (9%) of program storage space. Maximum is 262144 bytes.
Global variables use 3596 bytes (10%) of dynamic memory, leaving 29172 bytes for local variables. Maximum is 32768 bytes.

examples/Example2_SetOptions

Result: PASS

Sketch uses 26964 bytes (10%) of program storage space. Maximum is 262144 bytes.
Global variables use 3596 bytes (10%) of dynamic memory, leaving 29172 bytes for local variables. Maximum is 32768 bytes.

examples/Example3_WireOptions

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/examples/Example3_WireOptions/Example3_WireOptions.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/examples/Example3_WireOptions/Example3_WireOptions.ino:31:3: error: 'Wire1' was not declared in this scope
   Wire1.begin(); //Start the wire hardware that may be supported by your platform
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_SCD30_Arduino_Library/examples/Example3_WireOptions/Example3_WireOptions.ino:31:3: note: suggested alternative: 'Wire'
   Wire1.begin(); //Start the wire hardware that may be supported by your platform
   ^~~~~
   Wire

examples/Example4_EnableCalibrate

Result: PASS

Sketch uses 25152 bytes (9%) of program storage space. Maximum is 262144 bytes.
Global variables use 3596 bytes (10%) of dynamic memory, leaving 29172 bytes for local variables. Maximum is 32768 bytes.

examples/Example5_GetSettings

Result: PASS

Sketch uses 25944 bytes (9%) of program storage space. Maximum is 262144 bytes.
Global variables use 3596 bytes (10%) of dynamic memory, leaving 29172 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 202994 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.

examples/Example1_BasicReadings

Result: PASS

Sketch uses 216062 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14160 bytes (4%) of dynamic memory, leaving 313520 bytes for local variables. Maximum is 327680 bytes.

examples/Example2_SetOptions

Result: PASS

Sketch uses 216514 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14160 bytes (4%) of dynamic memory, leaving 313520 bytes for local variables. Maximum is 327680 bytes.

examples/Example3_WireOptions

Result: PASS

Sketch uses 216046 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14160 bytes (4%) of dynamic memory, leaving 313520 bytes for local variables. Maximum is 327680 bytes.

examples/Example4_EnableCalibrate

Result: PASS

Sketch uses 216166 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14160 bytes (4%) of dynamic memory, leaving 313520 bytes for local variables. Maximum is 327680 bytes.

examples/Example5_GetSettings

Result: PASS

Sketch uses 216870 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14160 bytes (4%) of dynamic memory, leaving 313520 bytes for local variables. Maximum is 327680 bytes.