SupmeaDO7016 - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

SupmeaDO7016

Version: 0.3.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	ODCalibrationGain	ReadParams
arduino:avr:uno 1.8.4	Yes	PASS	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes ⚠️	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes ⚠️	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes ⚠️	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 1332 bytes (4%) of program storage space. Maximum is 32256 bytes.
Global variables use 184 bytes (8%) of dynamic memory, leaving 1864 bytes for local variables. Maximum is 2048 bytes.

examples/ODCalibrationGain

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino:53:26: error: 'Serial2' was not declared in this scope
     ret = SupProbe.begin(Serial2, preTransmission, postTransmission);
                          ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino:53:26: note: suggested alternative: 'Serial'
     ret = SupProbe.begin(Serial2, preTransmission, postTransmission);
                          ^~~~~~~
                          Serial

examples/ReadParams

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ReadParams/ReadParams.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ReadParams/ReadParams.ino:48:26: error: 'Serial2' was not declared in this scope
     ret = SupProbe.begin(Serial2, preTransmission, postTransmission);
                          ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ReadParams/ReadParams.ino:48:26: note: suggested alternative: 'Serial'
     ret = SupProbe.begin(Serial2, preTransmission, postTransmission);
                          ^~~~~~~
                          Serial

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

WARNING: library NoDelay claims to run on avr, esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:36:38: error: default argument given for parameter 4 of 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' [-fpermissive]
     uint16_t serial_conf = SERIAL_8N2){
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:84:17: note: previous specification in 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' here
         uint8_t begin(Stream &port, void (*preT)(), void (*posT)(), uint8_t probe_addr = 10, uint16_t serial_speed = 9600, uint16_t serial_conf = SERIAL_8N2);
                 ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:36:38: error: default argument given for parameter 5 of 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' [-fpermissive]
     uint16_t serial_conf = SERIAL_8N2){
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:84:17: note: previous specification in 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' here
         uint8_t begin(Stream &port, void (*preT)(), void (*posT)(), uint8_t probe_addr = 10, uint16_t serial_speed = 9600, uint16_t serial_conf = SERIAL_8N2);
                 ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:36:38: error: default argument given for parameter 6 of 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' [-fpermissive]
     uint16_t serial_conf = SERIAL_8N2){
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:84:17: note: previous specification in 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' here
         uint8_t begin(Stream &port, void (*preT)(), void (*posT)(), uint8_t probe_addr = 10, uint16_t serial_speed = 9600, uint16_t serial_conf = SERIAL_8N2);
                 ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:66:71: error: default argument given for parameter 1 of 'uint8_t SupmeaDO7016::startMeasurement(uint8_t)' [-fpermissive]
 uint8_t SupmeaDO7016::startMeasurement(uint8_t param = MEASUREMENT_ALL){
                                                                       ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:85:17: note: previous specification in 'uint8_t SupmeaDO7016::startMeasurement(uint8_t)' here
         uint8_t startMeasurement(uint8_t param = MEASUREMENT_ALL);
                 ^~~~~~~~~~~~~~~~

examples/ODCalibrationGain

Result: FAIL

WARNING: library NoDelay claims to run on avr, esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino: In function 'void stop(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino:100:5: error: 'cli' was not declared in this scope
     cli();
     ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino:153:37: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
     SupProbe.send_frame_210(op, date);
                                     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino:19:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:100:17: note:   initializing argument 1 of 'uint8_t SupmeaDO7016::send_frame_210(char*, char*)'
         uint8_t send_frame_210(char *op, char *date);
                 ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino:153:37: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
     SupProbe.send_frame_210(op, date);
                                     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino:19:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:100:17: note:   initializing argument 2 of 'uint8_t SupmeaDO7016::send_frame_210(char*, char*)'
         uint8_t send_frame_210(char *op, char *date);
                 ^~~~~~~~~~~~~~

examples/ReadParams

Result: FAIL

WARNING: library NoDelay claims to run on avr, esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:36:38: error: default argument given for parameter 4 of 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' [-fpermissive]
     uint16_t serial_conf = SERIAL_8N2){
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:84:17: note: previous specification in 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' here
         uint8_t begin(Stream &port, void (*preT)(), void (*posT)(), uint8_t probe_addr = 10, uint16_t serial_speed = 9600, uint16_t serial_conf = SERIAL_8N2);
                 ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:36:38: error: default argument given for parameter 5 of 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' [-fpermissive]
     uint16_t serial_conf = SERIAL_8N2){
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:84:17: note: previous specification in 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' here
         uint8_t begin(Stream &port, void (*preT)(), void (*posT)(), uint8_t probe_addr = 10, uint16_t serial_speed = 9600, uint16_t serial_conf = SERIAL_8N2);
                 ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:36:38: error: default argument given for parameter 6 of 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' [-fpermissive]
     uint16_t serial_conf = SERIAL_8N2){
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:84:17: note: previous specification in 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' here
         uint8_t begin(Stream &port, void (*preT)(), void (*posT)(), uint8_t probe_addr = 10, uint16_t serial_speed = 9600, uint16_t serial_conf = SERIAL_8N2);
                 ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:66:71: error: default argument given for parameter 1 of 'uint8_t SupmeaDO7016::startMeasurement(uint8_t)' [-fpermissive]
 uint8_t SupmeaDO7016::startMeasurement(uint8_t param = MEASUREMENT_ALL){
                                                                       ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:85:17: note: previous specification in 'uint8_t SupmeaDO7016::startMeasurement(uint8_t)' here
         uint8_t startMeasurement(uint8_t param = MEASUREMENT_ALL);
                 ^~~~~~~~~~~~~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library NoDelay claims to run on avr, esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 2614 bytes (5%) of program storage space. Maximum is 49152 bytes.
Global variables use 177 bytes (2%) of dynamic memory, leaving 5967 bytes for local variables. Maximum is 6144 bytes.

examples/ODCalibrationGain

Result: FAIL

WARNING: library NoDelay claims to run on avr, esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino:53:26: error: 'Serial2' was not declared in this scope
     ret = SupProbe.begin(Serial2, preTransmission, postTransmission);
                          ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino:53:26: note: suggested alternative: 'Serial1'
     ret = SupProbe.begin(Serial2, preTransmission, postTransmission);
                          ^~~~~~~
                          Serial1

examples/ReadParams

Result: FAIL

WARNING: library NoDelay claims to run on avr, esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ReadParams/ReadParams.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ReadParams/ReadParams.ino:48:26: error: 'Serial2' was not declared in this scope
     ret = SupProbe.begin(Serial2, preTransmission, postTransmission);
                          ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ReadParams/ReadParams.ino:48:26: note: suggested alternative: 'Serial1'
     ret = SupProbe.begin(Serial2, preTransmission, postTransmission);
                          ^~~~~~~
                          Serial1

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

WARNING: library NoDelay claims to run on avr, esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:36:38: error: default argument given for parameter 4 of 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' [-fpermissive]
     uint16_t serial_conf = SERIAL_8N2){
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:84:17: note: previous specification in 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' here
         uint8_t begin(Stream &port, void (*preT)(), void (*posT)(), uint8_t probe_addr = 10, uint16_t serial_speed = 9600, uint16_t serial_conf = SERIAL_8N2);
                 ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:36:38: error: default argument given for parameter 5 of 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' [-fpermissive]
     uint16_t serial_conf = SERIAL_8N2){
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:84:17: note: previous specification in 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' here
         uint8_t begin(Stream &port, void (*preT)(), void (*posT)(), uint8_t probe_addr = 10, uint16_t serial_speed = 9600, uint16_t serial_conf = SERIAL_8N2);
                 ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:36:38: error: default argument given for parameter 6 of 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' [-fpermissive]
     uint16_t serial_conf = SERIAL_8N2){
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:84:17: note: previous specification in 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' here
         uint8_t begin(Stream &port, void (*preT)(), void (*posT)(), uint8_t probe_addr = 10, uint16_t serial_speed = 9600, uint16_t serial_conf = SERIAL_8N2);
                 ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:66:71: error: default argument given for parameter 1 of 'uint8_t SupmeaDO7016::startMeasurement(uint8_t)' [-fpermissive]
 uint8_t SupmeaDO7016::startMeasurement(uint8_t param = MEASUREMENT_ALL){
                                                                       ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:85:17: note: previous specification in 'uint8_t SupmeaDO7016::startMeasurement(uint8_t)' here
         uint8_t startMeasurement(uint8_t param = MEASUREMENT_ALL);
                 ^~~~~~~~~~~~~~~~

examples/ODCalibrationGain

Result: FAIL

WARNING: library NoDelay claims to run on avr, esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino: In function 'void stop(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino:100:5: error: 'cli' was not declared in this scope
     cli();
     ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino:100:5: note: suggested alternative: 'Gclk'
     cli();
     ^~~
     Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino:153:37: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
     SupProbe.send_frame_210(op, date);
                                     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino:19:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:100:17: note:   initializing argument 1 of 'uint8_t SupmeaDO7016::send_frame_210(char*, char*)'
         uint8_t send_frame_210(char *op, char *date);
                 ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino:153:37: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
     SupProbe.send_frame_210(op, date);
                                     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino:19:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:100:17: note:   initializing argument 2 of 'uint8_t SupmeaDO7016::send_frame_210(char*, char*)'
         uint8_t send_frame_210(char *op, char *date);
                 ^~~~~~~~~~~~~~

examples/ReadParams

Result: FAIL

WARNING: library NoDelay claims to run on avr, esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:36:38: error: default argument given for parameter 4 of 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' [-fpermissive]
     uint16_t serial_conf = SERIAL_8N2){
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:84:17: note: previous specification in 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' here
         uint8_t begin(Stream &port, void (*preT)(), void (*posT)(), uint8_t probe_addr = 10, uint16_t serial_speed = 9600, uint16_t serial_conf = SERIAL_8N2);
                 ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:36:38: error: default argument given for parameter 5 of 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' [-fpermissive]
     uint16_t serial_conf = SERIAL_8N2){
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:84:17: note: previous specification in 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' here
         uint8_t begin(Stream &port, void (*preT)(), void (*posT)(), uint8_t probe_addr = 10, uint16_t serial_speed = 9600, uint16_t serial_conf = SERIAL_8N2);
                 ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:36:38: error: default argument given for parameter 6 of 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' [-fpermissive]
     uint16_t serial_conf = SERIAL_8N2){
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:84:17: note: previous specification in 'uint8_t SupmeaDO7016::begin(arduino::Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' here
         uint8_t begin(Stream &port, void (*preT)(), void (*posT)(), uint8_t probe_addr = 10, uint16_t serial_speed = 9600, uint16_t serial_conf = SERIAL_8N2);
                 ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:66:71: error: default argument given for parameter 1 of 'uint8_t SupmeaDO7016::startMeasurement(uint8_t)' [-fpermissive]
 uint8_t SupmeaDO7016::startMeasurement(uint8_t param = MEASUREMENT_ALL){
                                                                       ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:85:17: note: previous specification in 'uint8_t SupmeaDO7016::startMeasurement(uint8_t)' here
         uint8_t startMeasurement(uint8_t param = MEASUREMENT_ALL);
                 ^~~~~~~~~~~~~~~~

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:36:38: error: default argument given for parameter 4 of 'uint8_t SupmeaDO7016::begin(Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' [-fpermissive]
     uint16_t serial_conf = SERIAL_8N2){
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:84:17: note: previous specification in 'uint8_t SupmeaDO7016::begin(Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' here
         uint8_t begin(Stream &port, void (*preT)(), void (*posT)(), uint8_t probe_addr = 10, uint16_t serial_speed = 9600, uint16_t serial_conf = SERIAL_8N2);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:36:38: error: default argument given for parameter 5 of 'uint8_t SupmeaDO7016::begin(Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' [-fpermissive]
     uint16_t serial_conf = SERIAL_8N2){
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:84:17: note: previous specification in 'uint8_t SupmeaDO7016::begin(Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' here
         uint8_t begin(Stream &port, void (*preT)(), void (*posT)(), uint8_t probe_addr = 10, uint16_t serial_speed = 9600, uint16_t serial_conf = SERIAL_8N2);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:36:38: error: default argument given for parameter 6 of 'uint8_t SupmeaDO7016::begin(Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' [-fpermissive]
     uint16_t serial_conf = SERIAL_8N2){
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:84:17: note: previous specification in 'uint8_t SupmeaDO7016::begin(Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' here
         uint8_t begin(Stream &port, void (*preT)(), void (*posT)(), uint8_t probe_addr = 10, uint16_t serial_speed = 9600, uint16_t serial_conf = SERIAL_8N2);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:66:71: error: default argument given for parameter 1 of 'uint8_t SupmeaDO7016::startMeasurement(uint8_t)' [-fpermissive]
 uint8_t SupmeaDO7016::startMeasurement(uint8_t param = MEASUREMENT_ALL){
                                                                       ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:85:17: note: previous specification in 'uint8_t SupmeaDO7016::startMeasurement(uint8_t)' here
         uint8_t startMeasurement(uint8_t param = MEASUREMENT_ALL);
                 ^

examples/ODCalibrationGain

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino:153:37: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
     SupProbe.send_frame_210(op, date);
                                     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino:19:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:100:17: note:   initializing argument 1 of 'uint8_t SupmeaDO7016::send_frame_210(char*, char*)'
         uint8_t send_frame_210(char *op, char *date);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino:153:37: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
     SupProbe.send_frame_210(op, date);
                                     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/examples/ODCalibrationGain/ODCalibrationGain.ino:19:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:100:17: note:   initializing argument 2 of 'uint8_t SupmeaDO7016::send_frame_210(char*, char*)'
         uint8_t send_frame_210(char *op, char *date);
                 ^

examples/ReadParams

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:36:38: error: default argument given for parameter 4 of 'uint8_t SupmeaDO7016::begin(Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' [-fpermissive]
     uint16_t serial_conf = SERIAL_8N2){
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:84:17: note: previous specification in 'uint8_t SupmeaDO7016::begin(Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' here
         uint8_t begin(Stream &port, void (*preT)(), void (*posT)(), uint8_t probe_addr = 10, uint16_t serial_speed = 9600, uint16_t serial_conf = SERIAL_8N2);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:36:38: error: default argument given for parameter 5 of 'uint8_t SupmeaDO7016::begin(Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' [-fpermissive]
     uint16_t serial_conf = SERIAL_8N2){
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:84:17: note: previous specification in 'uint8_t SupmeaDO7016::begin(Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' here
         uint8_t begin(Stream &port, void (*preT)(), void (*posT)(), uint8_t probe_addr = 10, uint16_t serial_speed = 9600, uint16_t serial_conf = SERIAL_8N2);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:36:38: error: default argument given for parameter 6 of 'uint8_t SupmeaDO7016::begin(Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' [-fpermissive]
     uint16_t serial_conf = SERIAL_8N2){
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:84:17: note: previous specification in 'uint8_t SupmeaDO7016::begin(Stream&, void (*)(), void (*)(), uint8_t, uint16_t, uint16_t)' here
         uint8_t begin(Stream &port, void (*preT)(), void (*posT)(), uint8_t probe_addr = 10, uint16_t serial_speed = 9600, uint16_t serial_conf = SERIAL_8N2);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:66:71: error: default argument given for parameter 1 of 'uint8_t SupmeaDO7016::startMeasurement(uint8_t)' [-fpermissive]
 uint8_t SupmeaDO7016::startMeasurement(uint8_t param = MEASUREMENT_ALL){
                                                                       ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SupmeaDO7016/src/SupmeaDO7016.h:85:17: note: previous specification in 'uint8_t SupmeaDO7016::startMeasurement(uint8_t)' here
         uint8_t startMeasurement(uint8_t param = MEASUREMENT_ALL);
                 ^