TLE5012B - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

TLE5012B

Version: 3.0.1
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	readAngleValueProcessing	readMultipleRegisters	readSpeedProcessing	sensorType	E9000SPC	readAngleTest	sensorRegisters	testSensorMainValues	useMultipleSensors	writeRegisters	readAngleSpeedRevolutions
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/E9000SPC

Result: PASS

Sketch uses 8906 bytes (27%) of program storage space. Maximum is 32256 bytes.
Global variables use 659 bytes (32%) of dynamic memory, leaving 1389 bytes for local variables. Maximum is 2048 bytes.

examples/readAngleSpeedRevolutions

Result: PASS

Sketch uses 8126 bytes (25%) of program storage space. Maximum is 32256 bytes.
Global variables use 615 bytes (30%) of dynamic memory, leaving 1433 bytes for local variables. Maximum is 2048 bytes.

examples/readAngleTest

Result: PASS

Sketch uses 8318 bytes (25%) of program storage space. Maximum is 32256 bytes.
Global variables use 635 bytes (31%) of dynamic memory, leaving 1413 bytes for local variables. Maximum is 2048 bytes.

examples/readAngleValueProcessing

Result: PASS

Sketch uses 6960 bytes (21%) of program storage space. Maximum is 32256 bytes.
Global variables use 581 bytes (28%) of dynamic memory, leaving 1467 bytes for local variables. Maximum is 2048 bytes.

examples/readMultipleRegisters

Result: PASS

Sketch uses 5848 bytes (18%) of program storage space. Maximum is 32256 bytes.
Global variables use 575 bytes (28%) of dynamic memory, leaving 1473 bytes for local variables. Maximum is 2048 bytes.

examples/readSpeedProcessing

Result: PASS

Sketch uses 7442 bytes (23%) of program storage space. Maximum is 32256 bytes.
Global variables use 579 bytes (28%) of dynamic memory, leaving 1469 bytes for local variables. Maximum is 2048 bytes.

examples/sensorRegisters

Result: PASS

Sketch uses 1672 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 238 bytes (11%) of dynamic memory, leaving 1810 bytes for local variables. Maximum is 2048 bytes.

examples/sensorType

Result: PASS

Sketch uses 11406 bytes (35%) of program storage space. Maximum is 32256 bytes.
Global variables use 1877 bytes (91%) of dynamic memory, leaving 171 bytes for local variables. Maximum is 2048 bytes.
Low memory available, stability problems may occur.

examples/testSensorMainValues

Result: PASS

Sketch uses 9350 bytes (28%) of program storage space. Maximum is 32256 bytes.
Global variables use 707 bytes (34%) of dynamic memory, leaving 1341 bytes for local variables. Maximum is 2048 bytes.

examples/useMultipleSensors

Result: PASS

Sketch uses 8304 bytes (25%) of program storage space. Maximum is 32256 bytes.
Global variables use 741 bytes (36%) of dynamic memory, leaving 1307 bytes for local variables. Maximum is 2048 bytes.

examples/writeRegisters

Result: PASS

Sketch uses 6906 bytes (21%) of program storage space. Maximum is 32256 bytes.
Global variables use 729 bytes (35%) of dynamic memory, leaving 1319 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/pal/spi3w-xmc.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/pal/spi3w-xmc.cpp:11:0:
/3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/pal/TLE5012-pal-ino.cpp:10:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/pal/TLE5012-pal-ino.cpp:10:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/E9000SPC

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/E9000SPC/E9000SPC.ino:26:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/E9000SPC/E9000SPC.ino:26:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/E9000SPC/E9000SPC.ino:26:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/readAngleSpeedRevolutions

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readAngleSpeedRevolutions/readAngleSpeedRevolutions.ino:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readAngleSpeedRevolutions/readAngleSpeedRevolutions.ino:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readAngleSpeedRevolutions/readAngleSpeedRevolutions.ino:19:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/readAngleTest

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readAngleTest/readAngleTest.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readAngleTest/readAngleTest.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readAngleTest/readAngleTest.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/readAngleValueProcessing

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readAngleValueProcessing/readAngleValueProcessing.ino:22:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readAngleValueProcessing/readAngleValueProcessing.ino:22:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readAngleValueProcessing/readAngleValueProcessing.ino:22:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/readMultipleRegisters

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readMultipleRegisters/readMultipleRegisters.ino:25:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readMultipleRegisters/readMultipleRegisters.ino:25:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readMultipleRegisters/readMultipleRegisters.ino:25:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/readSpeedProcessing

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readSpeedProcessing/readSpeedProcessing.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readSpeedProcessing/readSpeedProcessing.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readSpeedProcessing/readSpeedProcessing.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/sensorRegisters

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/sensorRegisters/sensorRegisters.ino:36:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/sensorRegisters/sensorRegisters.ino:36:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/sensorRegisters/sensorRegisters.ino:36:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/sensorType

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/sensorType/sensorType.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/sensorType/sensorType.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/sensorType/sensorType.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/testSensorMainValues

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/testSensorMainValues/testSensorMainValues.ino:17:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/testSensorMainValues/testSensorMainValues.ino:17:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/testSensorMainValues/testSensorMainValues.ino:17:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/useMultipleSensors

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/useMultipleSensors/useMultipleSensors.ino:23:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/useMultipleSensors/useMultipleSensors.ino:23:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/useMultipleSensors/useMultipleSensors.ino:23:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/writeRegisters

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/writeRegisters/writeRegisters.ino:16:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/writeRegisters/writeRegisters.ino:16:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/writeRegisters/writeRegisters.ino:16:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL

examples/E9000SPC

Result: FAIL

examples/readAngleSpeedRevolutions

Result: FAIL

examples/readAngleTest

Result: FAIL

examples/readAngleValueProcessing

Result: FAIL

examples/readMultipleRegisters

Result: FAIL

examples/readSpeedProcessing

Result: FAIL

examples/sensorRegisters

Result: FAIL

examples/sensorType

Result: FAIL

examples/testSensorMainValues

Result: FAIL

examples/useMultipleSensors

Result: FAIL

examples/writeRegisters

Result: FAIL

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

examples/E9000SPC

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/E9000SPC/E9000SPC.ino:26:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/E9000SPC/E9000SPC.ino:26:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/E9000SPC/E9000SPC.ino:26:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/readAngleSpeedRevolutions

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readAngleSpeedRevolutions/readAngleSpeedRevolutions.ino:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readAngleSpeedRevolutions/readAngleSpeedRevolutions.ino:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readAngleSpeedRevolutions/readAngleSpeedRevolutions.ino:19:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/readAngleTest

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readAngleTest/readAngleTest.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readAngleTest/readAngleTest.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readAngleTest/readAngleTest.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/readAngleValueProcessing

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readAngleValueProcessing/readAngleValueProcessing.ino:22:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readAngleValueProcessing/readAngleValueProcessing.ino:22:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readAngleValueProcessing/readAngleValueProcessing.ino:22:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/readMultipleRegisters

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readMultipleRegisters/readMultipleRegisters.ino:25:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readMultipleRegisters/readMultipleRegisters.ino:25:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readMultipleRegisters/readMultipleRegisters.ino:25:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/readSpeedProcessing

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readSpeedProcessing/readSpeedProcessing.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readSpeedProcessing/readSpeedProcessing.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readSpeedProcessing/readSpeedProcessing.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/sensorRegisters

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/sensorRegisters/sensorRegisters.ino:36:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/sensorRegisters/sensorRegisters.ino:36:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/sensorRegisters/sensorRegisters.ino:36:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/sensorType

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/sensorType/sensorType.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/sensorType/sensorType.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/sensorType/sensorType.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/testSensorMainValues

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/testSensorMainValues/testSensorMainValues.ino:17:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/testSensorMainValues/testSensorMainValues.ino:17:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/testSensorMainValues/testSensorMainValues.ino:17:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/useMultipleSensors

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/useMultipleSensors/useMultipleSensors.ino:23:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/useMultipleSensors/useMultipleSensors.ino:23:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/useMultipleSensors/useMultipleSensors.ino:23:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

examples/writeRegisters

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/writeRegisters/writeRegisters.ino:16:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:102:19: error: cannot declare variable 'SPI3W' to be of abstract type 'SPIClass3W'
 extern SPIClass3W SPI3W;
                   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/writeRegisters/writeRegisters.ino:16:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:42:7: note:   because the following virtual functions are pure within 'SPIClass3W':
 class SPIClass3W : public SPIClass
       ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spi3w-ino.hpp:14,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/spic-arduino.hpp:21,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/../pal/TLE5012-pal-ino.hpp:28,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/framework/arduino/wrapper/TLE5012-platf-ino.hpp:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/writeRegisters/writeRegisters.ino:16:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

examples/E9000SPC

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/E9000SPC/E9000SPC.ino:26:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/corelib/TLE5012b.hpp:48:3: error: 'GPIO' does not name a type
   GPIO     *en;                //!< \brief shield enable GPIO to switch sensor2go on/off
   ^

examples/readAngleSpeedRevolutions

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readAngleSpeedRevolutions/readAngleSpeedRevolutions.ino:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/corelib/TLE5012b.hpp:48:3: error: 'GPIO' does not name a type
   GPIO     *en;                //!< \brief shield enable GPIO to switch sensor2go on/off
   ^

examples/readAngleTest

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readAngleTest/readAngleTest.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/corelib/TLE5012b.hpp:48:3: error: 'GPIO' does not name a type
   GPIO     *en;                //!< \brief shield enable GPIO to switch sensor2go on/off
   ^

examples/readAngleValueProcessing

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readAngleValueProcessing/readAngleValueProcessing.ino:22:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/corelib/TLE5012b.hpp:48:3: error: 'GPIO' does not name a type
   GPIO     *en;                //!< \brief shield enable GPIO to switch sensor2go on/off
   ^

examples/readMultipleRegisters

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readMultipleRegisters/readMultipleRegisters.ino:25:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/corelib/TLE5012b.hpp:48:3: error: 'GPIO' does not name a type
   GPIO     *en;                //!< \brief shield enable GPIO to switch sensor2go on/off
   ^

examples/readSpeedProcessing

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/readSpeedProcessing/readSpeedProcessing.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/corelib/TLE5012b.hpp:48:3: error: 'GPIO' does not name a type
   GPIO     *en;                //!< \brief shield enable GPIO to switch sensor2go on/off
   ^

examples/sensorRegisters

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/sensorRegisters/sensorRegisters.ino:36:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/corelib/TLE5012b.hpp:48:3: error: 'GPIO' does not name a type
   GPIO     *en;                //!< \brief shield enable GPIO to switch sensor2go on/off
   ^

examples/sensorType

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/sensorType/sensorType.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/corelib/TLE5012b.hpp:48:3: error: 'GPIO' does not name a type
   GPIO     *en;                //!< \brief shield enable GPIO to switch sensor2go on/off
   ^

examples/testSensorMainValues

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/testSensorMainValues/testSensorMainValues.ino:17:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/corelib/TLE5012b.hpp:48:3: error: 'GPIO' does not name a type
   GPIO     *en;                //!< \brief shield enable GPIO to switch sensor2go on/off
   ^

examples/useMultipleSensors

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/useMultipleSensors/useMultipleSensors.ino:23:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/corelib/TLE5012b.hpp:48:3: error: 'GPIO' does not name a type
   GPIO     *en;                //!< \brief shield enable GPIO to switch sensor2go on/off
   ^

examples/writeRegisters

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/TLE5012-ino.hpp:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/examples/writeRegisters/writeRegisters.ino:16:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLE5012B/src/corelib/TLE5012b.hpp:48:3: error: 'GPIO' does not name a type
   GPIO     *en;                //!< \brief shield enable GPIO to switch sensor2go on/off
   ^