TLx4966-Direction-Speed-Sensor - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

TLx4966-Direction-Speed-Sensor

Version: 1.1.2
More details

Compatibility matrix

Board Claims compatibility Inclusion 
switchPoll
 
lowLevelPoll
arduino:avr:uno
1.8.4 		Yes PASS PASS PASS
arduino:mbed_nano:nanorp2040connect
2.7.2 		Yes ⚠️ FAIL FAIL PASS
arduino:megaavr:nona4809
1.8.7 		Yes ⚠️ FAIL FAIL FAIL
arduino:samd:mkrwifi1010
1.8.12 		Yes ⚠️ FAIL FAIL FAIL
esp32:esp32:d1_mini32
1.0.6 		Yes ⚠️ FAIL FAIL FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS 

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/lowLevelPoll

Result: PASS 

Sketch uses 4050 bytes (12%) of program storage space. Maximum is 32256 bytes.
Global variables use 238 bytes (11%) of dynamic memory, leaving 1810 bytes for local variables. Maximum is 2048 bytes.

examples/switchPoll

Result: PASS 

Sketch uses 5380 bytes (16%) of program storage space. Maximum is 32256 bytes.
Global variables use 377 bytes (18%) of dynamic memory, leaving 1671 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL 



					
					
examples/lowLevelPoll

					

						Result: PASS
					

					
Sketch uses 80236 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43452 bytes (16%) of dynamic memory, leaving 226884 bytes for local variables. Maximum is 270336 bytes.


					
					
examples/switchPoll

					

						Result: FAIL
					

					

					
				
				
arduino:megaavr:nona4809 @ 1.8.7

				
Inclusion

				

					Result: FAIL
					
				

				


					
					
examples/lowLevelPoll

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino:22:11: error: 'LED1' was not declared in this scope
   pinMode(LED1, OUTPUT);
           ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino:22:11: note: suggested alternative: 'DD1'
   pinMode(LED1, OUTPUT);
           ^~~~
           DD1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino:23:11: error: 'LED2' was not declared in this scope
   pinMode(LED2, OUTPUT);
           ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino:23:11: note: suggested alternative: 'DD2'
   pinMode(LED2, OUTPUT);
           ^~~~
           DD2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino:42:16: error: 'LED1' was not declared in this scope
   digitalWrite(LED1, digitalRead(spdPin));
                ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino:42:16: note: suggested alternative: 'DD1'
   digitalWrite(LED1, digitalRead(spdPin));
                ^~~~
                DD1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino:43:16: error: 'LED2' was not declared in this scope
   digitalWrite(LED2, digitalRead(dirPin));
                ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino:43:16: note: suggested alternative: 'DD2'
   digitalWrite(LED2, digitalRead(dirPin));
                ^~~~
                DD2



					
					
examples/switchPoll

					

						Result: FAIL
					

					

					
				
				
arduino:samd:mkrwifi1010 @ 1.8.12

				
Inclusion

				

					Result: FAIL
					
				

				
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/src/hw-platf/TLx4966-platf-ard.c:38:3: error: #error "Board not yet defined. Please define the specific Arduino boards Pins"
 # error "Board not yet defined. Please define the specific Arduino boards Pins"
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/src/hw-platf/TLx4966-platf-ard.c: In function 'GPIO_Speed_Init':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/src/hw-platf/TLx4966-platf-ard.c:45:13: error: 'speedGPIO' undeclared (first use in this function)
     pinMode(speedGPIO, INPUT_PULLUP);
             ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/src/hw-platf/TLx4966-platf-ard.c:45:13: note: each undeclared identifier is reported only once for each function it appears in
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/src/hw-platf/TLx4966-platf-ard.c: In function 'GPIO_Speed_Read':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/src/hw-platf/TLx4966-platf-ard.c:51:24: error: 'speedGPIO' undeclared (first use in this function)
     return digitalRead(speedGPIO);
                        ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/src/hw-platf/TLx4966-platf-ard.c: In function 'GPIO_Dir_Init':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/src/hw-platf/TLx4966-platf-ard.c:67:13: error: 'dirGPIO' undeclared (first use in this function)
     pinMode(dirGPIO, INPUT_PULLUP);
             ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/src/hw-platf/TLx4966-platf-ard.c: In function 'GPIO_Dir_Read':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/src/hw-platf/TLx4966-platf-ard.c:73:24: error: 'dirGPIO' undeclared (first use in this function)
     return digitalRead(dirGPIO);
                        ^~~~~~~




					
					
examples/lowLevelPoll

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino:22:11: error: 'LED1' was not declared in this scope
   pinMode(LED1, OUTPUT);
           ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino:23:11: error: 'LED2' was not declared in this scope
   pinMode(LED2, OUTPUT);
           ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino:42:16: error: 'LED1' was not declared in this scope
   digitalWrite(LED1, digitalRead(spdPin));
                ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino:43:16: error: 'LED2' was not declared in this scope
   digitalWrite(LED2, digitalRead(dirPin));
                ^~~~



					
					
examples/switchPoll

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/src/hw-platf/TLx4966-platf-ard.c:38:3: error: #error "Board not yet defined. Please define the specific Arduino boards Pins"
 # error "Board not yet defined. Please define the specific Arduino boards Pins"
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/src/hw-platf/TLx4966-platf-ard.c: In function 'GPIO_Speed_Init':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/src/hw-platf/TLx4966-platf-ard.c:45:13: error: 'speedGPIO' undeclared (first use in this function)
     pinMode(speedGPIO, INPUT_PULLUP);
             ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/src/hw-platf/TLx4966-platf-ard.c:45:13: note: each undeclared identifier is reported only once for each function it appears in
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/src/hw-platf/TLx4966-platf-ard.c: In function 'GPIO_Speed_Read':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/src/hw-platf/TLx4966-platf-ard.c:51:24: error: 'speedGPIO' undeclared (first use in this function)
     return digitalRead(speedGPIO);
                        ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/src/hw-platf/TLx4966-platf-ard.c: In function 'GPIO_Dir_Init':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/src/hw-platf/TLx4966-platf-ard.c:67:13: error: 'dirGPIO' undeclared (first use in this function)
     pinMode(dirGPIO, INPUT_PULLUP);
             ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/src/hw-platf/TLx4966-platf-ard.c: In function 'GPIO_Dir_Read':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/src/hw-platf/TLx4966-platf-ard.c:73:24: error: 'dirGPIO' undeclared (first use in this function)
     return digitalRead(dirGPIO);
                        ^~~~~~~



					
				
				
esp32:esp32:d1_mini32 @ 1.0.6

				
Inclusion

				

					Result: FAIL
					
				

				


					
					
examples/lowLevelPoll

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino:22:11: error: 'LED1' was not declared in this scope
   pinMode(LED1, OUTPUT);
           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino:23:11: error: 'LED2' was not declared in this scope
   pinMode(LED2, OUTPUT);
           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino:42:16: error: 'LED1' was not declared in this scope
   digitalWrite(LED1, digitalRead(spdPin));
                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TLx4966-Direction-Speed-Sensor/examples/lowLevelPoll/lowLevelPoll.ino:43:16: error: 'LED2' was not declared in this scope
   digitalWrite(LED2, digitalRead(dirPin));
                ^



					
					
examples/switchPoll

					

						Result: FAIL