Thread - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Thread

Version: 0.0.2
More details

Compatibility matrix

Blinking

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 522 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/Blinking

Result: PASS

Sketch uses 4370 bytes (13%) of program storage space. Maximum is 32256 bytes.
Global variables use 1309 bytes (63%) of dynamic memory, leaving 739 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/Blinking

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:36:3: error: 'schedule' was not declared in this scope
   schedule();
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:41:3: error: 'spawn' was not declared in this scope
   spawn(&state1.data, &thread_loop);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:49:3: error: 'quantize' was not declared in this scope
   quantize();
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino: In function 'void thread_loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:61:9: error: 'thread' was not declared in this scope
     if (thread == MAIN)
         ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:61:9: note: suggested alternative: 'read'
     if (thread == MAIN)
         ^~~~~~
         read
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:61:19: error: 'MAIN' was not declared in this scope
     if (thread == MAIN)
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:61:19: note: suggested alternative: 'MIN'
     if (thread == MAIN)
                   ^~~~
                   MIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:64:7: error: 'hold' was not declared in this scope
       hold();
       ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:64:7: note: suggested alternative: 'poll'
       hold();
       ^~~~
       poll
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:67:7: error: 'quantize' was not declared in this scope
       quantize();
       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:72:13: error: 'grab' was not declared in this scope
     while (!grab(&mutex_serial, 1000))
             ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:74:7: error: 'hold' was not declared in this scope
       hold();
       ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:74:7: note: suggested alternative: 'poll'
       hold();
       ^~~~
       poll
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:76:7: error: 'quantize' was not declared in this scope
       quantize();
       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:80:31: error: 'thread' was not declared in this scope
   Serial.println(((data_type*)thread)->title);
                               ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:80:31: note: suggested alternative: 'read'
   Serial.println(((data_type*)thread)->title);
                               ^~~~~~
                               read
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:84:10: error: 'loose' was not declared in this scope
     if (!loose(&mutex_serial))
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:84:10: note: suggested alternative: 'close'
     if (!loose(&mutex_serial))
          ^~~~~
          close
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:86:7: error: 'hold' was not declared in this scope
       hold();
       ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:86:7: note: suggested alternative: 'poll'
       hold();
       ^~~~
       poll
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:89:7: error: 'quantize' was not declared in this scope
       quantize();
       ^~~~~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/Blinking

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:36:3: error: 'schedule' was not declared in this scope
   schedule();
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:41:3: error: 'spawn' was not declared in this scope
   spawn(&state1.data, &thread_loop);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:49:3: error: 'quantize' was not declared in this scope
   quantize();
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino: In function 'void thread_loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:61:9: error: 'thread' was not declared in this scope
     if (thread == MAIN)
         ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:61:9: note: suggested alternative: 'Thread'
     if (thread == MAIN)
         ^~~~~~
         Thread
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:61:19: error: 'MAIN' was not declared in this scope
     if (thread == MAIN)
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:61:19: note: suggested alternative: 'NAN'
     if (thread == MAIN)
                   ^~~~
                   NAN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:64:7: error: 'hold' was not declared in this scope
       hold();
       ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:64:7: note: suggested alternative: 'word'
       hold();
       ^~~~
       word
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:67:7: error: 'quantize' was not declared in this scope
       quantize();
       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:72:13: error: 'grab' was not declared in this scope
     while (!grab(&mutex_serial, 1000))
             ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:74:7: error: 'hold' was not declared in this scope
       hold();
       ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:74:7: note: suggested alternative: 'word'
       hold();
       ^~~~
       word
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:76:7: error: 'quantize' was not declared in this scope
       quantize();
       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:80:31: error: 'thread' was not declared in this scope
   Serial.println(((data_type*)thread)->title);
                               ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:80:31: note: suggested alternative: 'Thread'
   Serial.println(((data_type*)thread)->title);
                               ^~~~~~
                               Thread
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:84:10: error: 'loose' was not declared in this scope
     if (!loose(&mutex_serial))
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:84:10: note: suggested alternative: 'loop'
     if (!loose(&mutex_serial))
          ^~~~~
          loop
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:86:7: error: 'hold' was not declared in this scope
       hold();
       ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:86:7: note: suggested alternative: 'word'
       hold();
       ^~~~
       word
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:89:7: error: 'quantize' was not declared in this scope
       quantize();
       ^~~~~~~~
Multiple libraries were found for "Thread.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoThread
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/Blinking

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:36:3: error: 'schedule' was not declared in this scope
   schedule();
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:41:3: error: 'spawn' was not declared in this scope
   spawn(&state1.data, &thread_loop);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:49:3: error: 'quantize' was not declared in this scope
   quantize();
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino: In function 'void thread_loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:61:9: error: 'thread' was not declared in this scope
     if (thread == MAIN)
         ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:61:9: note: suggested alternative: 'Thread'
     if (thread == MAIN)
         ^~~~~~
         Thread
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:61:19: error: 'MAIN' was not declared in this scope
     if (thread == MAIN)
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:61:19: note: suggested alternative: 'NAN'
     if (thread == MAIN)
                   ^~~~
                   NAN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:64:7: error: 'hold' was not declared in this scope
       hold();
       ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:64:7: note: suggested alternative: 'word'
       hold();
       ^~~~
       word
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:67:7: error: 'quantize' was not declared in this scope
       quantize();
       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:72:13: error: 'grab' was not declared in this scope
     while (!grab(&mutex_serial, 1000))
             ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:74:7: error: 'hold' was not declared in this scope
       hold();
       ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:74:7: note: suggested alternative: 'word'
       hold();
       ^~~~
       word
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:76:7: error: 'quantize' was not declared in this scope
       quantize();
       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:80:31: error: 'thread' was not declared in this scope
   Serial.println(((data_type*)thread)->title);
                               ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:80:31: note: suggested alternative: 'Thread'
   Serial.println(((data_type*)thread)->title);
                               ^~~~~~
                               Thread
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:84:10: error: 'loose' was not declared in this scope
     if (!loose(&mutex_serial))
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:84:10: note: suggested alternative: 'loop'
     if (!loose(&mutex_serial))
          ^~~~~
          loop
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:86:7: error: 'hold' was not declared in this scope
       hold();
       ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:86:7: note: suggested alternative: 'word'
       hold();
       ^~~~
       word
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:89:7: error: 'quantize' was not declared in this scope
       quantize();
       ^~~~~~~~
Multiple libraries were found for "Thread.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoThread
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 197914 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13108 bytes (4%) of dynamic memory, leaving 314572 bytes for local variables. Maximum is 327680 bytes.

examples/Blinking

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:36:12: error: 'schedule' was not declared in this scope
   schedule();
            ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:41:35: error: 'spawn' was not declared in this scope
   spawn(&state1.data, &thread_loop);
                                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:49:12: error: 'quantize' was not declared in this scope
   quantize();
            ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino: In function 'void thread_loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:61:9: error: 'thread' was not declared in this scope
     if (thread == MAIN)
         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:61:19: error: 'MAIN' was not declared in this scope
     if (thread == MAIN)
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:64:12: error: 'hold' was not declared in this scope
       hold();
            ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:67:16: error: 'quantize' was not declared in this scope
       quantize();
                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:72:37: error: 'grab' was not declared in this scope
     while (!grab(&mutex_serial, 1000))
                                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:74:12: error: 'hold' was not declared in this scope
       hold();
            ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:76:16: error: 'quantize' was not declared in this scope
       quantize();
                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:80:31: error: 'thread' was not declared in this scope
   Serial.println(((data_type*)thread)->title);
                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:84:29: error: 'loose' was not declared in this scope
     if (!loose(&mutex_serial))
                             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:86:12: error: 'hold' was not declared in this scope
       hold();
            ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread/examples/Blinking/Blinking.ino:89:16: error: 'quantize' was not declared in this scope
       quantize();
                ^
Multiple libraries were found for "Thread.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoThread
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Thread