TimedPID - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

TimedPID

Version: 1.0.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	DemoTimedPID	Minimum
arduino:avr:uno 1.8.4	Yes	PASS	PASS	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No ⚠️	PASS	PASS	FAIL
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	PASS	FAIL
arduino:samd:mkrwifi1010 1.8.12	No ⚠️	PASS	PASS	FAIL
esp32:esp32:d1_mini32 1.0.6	No ⚠️	PASS	PASS	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/DemoTimedPID

Result: PASS

Sketch uses 4778 bytes (14%) of program storage space. Maximum is 32256 bytes.
Global variables use 255 bytes (12%) of dynamic memory, leaving 1793 bytes for local variables. Maximum is 2048 bytes.

examples/Minimum

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:38:14: error: 'Kp' was not declared in this scope
 TimedPID pid(Kp, Ki, Kd);
              ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:38:18: error: 'Ki' was not declared in this scope
 TimedPID pid(Kp, Ki, Kd);
                  ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:38:22: error: 'Kd' was not declared in this scope
 TimedPID pid(Kp, Ki, Kd);
                      ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:55:26: error: 'setPoint' was not declared in this scope
   float cmd = pid.getCmd(setPoint, procVar);
                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:55:26: note: suggested alternative: 'Print'
   float cmd = pid.getCmd(setPoint, procVar);
                          ^~~~~~~~
                          Print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:55:36: error: 'procVar' was not declared in this scope
   float cmd = pid.getCmd(setPoint, procVar);
                                    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:55:36: note: suggested alternative: 'putchar'
   float cmd = pid.getCmd(setPoint, procVar);
                                    ^~~~~~~
                                    putchar

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

WARNING: library TimedPID claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/DemoTimedPID

Result: PASS

WARNING: library TimedPID claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 88890 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43524 bytes (16%) of dynamic memory, leaving 226812 bytes for local variables. Maximum is 270336 bytes.

examples/Minimum

Result: FAIL

WARNING: library TimedPID claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:38:14: error: 'Kp' was not declared in this scope
 TimedPID pid(Kp, Ki, Kd);
              ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:38:18: error: 'Ki' was not declared in this scope
 TimedPID pid(Kp, Ki, Kd);
                  ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:38:22: error: 'Kd' was not declared in this scope
 TimedPID pid(Kp, Ki, Kd);
                      ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:55:26: error: 'setPoint' was not declared in this scope
   float cmd = pid.getCmd(setPoint, procVar);
                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:55:26: note: suggested alternative: 'setenv'
   float cmd = pid.getCmd(setPoint, procVar);
                          ^~~~~~~~
                          setenv
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:55:36: error: 'procVar' was not declared in this scope
   float cmd = pid.getCmd(setPoint, procVar);
                                    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:55:36: note: suggested alternative: 'prog_char'
   float cmd = pid.getCmd(setPoint, procVar);
                                    ^~~~~~~
                                    prog_char

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library TimedPID claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/DemoTimedPID

Result: PASS

WARNING: library TimedPID claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 5899 bytes (12%) of program storage space. Maximum is 49152 bytes.
Global variables use 230 bytes (3%) of dynamic memory, leaving 5914 bytes for local variables. Maximum is 6144 bytes.

examples/Minimum

Result: FAIL

WARNING: library TimedPID claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:38:14: error: 'Kp' was not declared in this scope
 TimedPID pid(Kp, Ki, Kd);
              ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:38:18: error: 'Ki' was not declared in this scope
 TimedPID pid(Kp, Ki, Kd);
                  ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:38:22: error: 'Kd' was not declared in this scope
 TimedPID pid(Kp, Ki, Kd);
                      ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:55:26: error: 'setPoint' was not declared in this scope
   float cmd = pid.getCmd(setPoint, procVar);
                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:55:26: note: suggested alternative: 'stdout'
   float cmd = pid.getCmd(setPoint, procVar);
                          ^~~~~~~~
                          stdout
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:55:36: error: 'procVar' was not declared in this scope
   float cmd = pid.getCmd(setPoint, procVar);
                                    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:55:36: note: suggested alternative: 'putchar'
   float cmd = pid.getCmd(setPoint, procVar);
                                    ^~~~~~~
                                    putchar

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

WARNING: library TimedPID claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/DemoTimedPID

Result: PASS

WARNING: library TimedPID claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 30884 bytes (11%) of program storage space. Maximum is 262144 bytes.
Global variables use 3072 bytes (9%) of dynamic memory, leaving 29696 bytes for local variables. Maximum is 32768 bytes.

examples/Minimum

Result: FAIL

WARNING: library TimedPID claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:38:14: error: 'Kp' was not declared in this scope
 TimedPID pid(Kp, Ki, Kd);
              ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:38:18: error: 'Ki' was not declared in this scope
 TimedPID pid(Kp, Ki, Kd);
                  ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:38:22: error: 'Kd' was not declared in this scope
 TimedPID pid(Kp, Ki, Kd);
                      ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:55:26: error: 'setPoint' was not declared in this scope
   float cmd = pid.getCmd(setPoint, procVar);
                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:55:26: note: suggested alternative: 'setenv'
   float cmd = pid.getCmd(setPoint, procVar);
                          ^~~~~~~~
                          setenv
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:55:36: error: 'procVar' was not declared in this scope
   float cmd = pid.getCmd(setPoint, procVar);
                                    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:55:36: note: suggested alternative: 'prog_char'
   float cmd = pid.getCmd(setPoint, procVar);
                                    ^~~~~~~
                                    prog_char

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

WARNING: library TimedPID claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 197842 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13100 bytes (3%) of dynamic memory, leaving 314580 bytes for local variables. Maximum is 327680 bytes.

examples/DemoTimedPID

Result: PASS

WARNING: library TimedPID claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 211134 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13496 bytes (4%) of dynamic memory, leaving 314184 bytes for local variables. Maximum is 327680 bytes.

examples/Minimum

Result: FAIL

WARNING: library TimedPID claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:38:14: error: 'Kp' was not declared in this scope
 TimedPID pid(Kp, Ki, Kd);
              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:38:18: error: 'Ki' was not declared in this scope
 TimedPID pid(Kp, Ki, Kd);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:38:22: error: 'Kd' was not declared in this scope
 TimedPID pid(Kp, Ki, Kd);
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:55:26: error: 'setPoint' was not declared in this scope
   float cmd = pid.getCmd(setPoint, procVar);
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TimedPID/examples/Minimum/Minimum.ino:55:36: error: 'procVar' was not declared in this scope
   float cmd = pid.getCmd(setPoint, procVar);
                                    ^