TinyMegaI2C - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

TinyMegaI2C

Version: 0.0.4
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	tinyI2CScanner
arduino:avr:uno 1.8.4	No	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	No	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	No	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL

WARNING: library TinyMegaI2C claims to run on megaavr architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp: In member function 'void TinyMegaI2CMaster::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:27:3: error: 'TWI0' was not declared in this scope
   TWI0.MBAUD = (uint8_t)baud;
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:27:3: note: suggested alternative: 'TWA0'
   TWI0.MBAUD = (uint8_t)baud;
   ^~~~
   TWA0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:28:17: error: 'TWI_ENABLE_bm' was not declared in this scope
   TWI0.MCTRLA = TWI_ENABLE_bm; // Enable as master, no interrupts
                 ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:29:18: error: 'TWI_BUSSTATE_IDLE_gc' was not declared in this scope
   TWI0.MSTATUS = TWI_BUSSTATE_IDLE_gc;
                  ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp: In member function 'uint8_t TinyMegaI2CMaster::read()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:36:12: error: 'TWI0' was not declared in this scope
   while (!(TWI0.MSTATUS & TWI_RIF_bm))
            ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:36:12: note: suggested alternative: 'TWA0'
   while (!(TWI0.MSTATUS & TWI_RIF_bm))
            ^~~~
            TWA0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:36:27: error: 'TWI_RIF_bm' was not declared in this scope
   while (!(TWI0.MSTATUS & TWI_RIF_bm))
                           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:38:18: error: 'TWI0' was not declared in this scope
   uint8_t data = TWI0.MDATA;
                  ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:38:18: note: suggested alternative: 'TWA0'
   uint8_t data = TWI0.MDATA;
                  ^~~~
                  TWA0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:41:19: error: 'TWI_MCMD_RECVTRANS_gc' was not declared in this scope
     TWI0.MCTRLB = TWI_MCMD_RECVTRANS_gc; // if ACK = more bytes to read
                   ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:43:19: error: 'TWI_ACKACT_bm' was not declared in this scope
     TWI0.MCTRLB = TWI_ACKACT_bm | TWI_MCMD_RECVTRANS_gc; // else Send NAK
                   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:43:35: error: 'TWI_MCMD_RECVTRANS_gc' was not declared in this scope
     TWI0.MCTRLB = TWI_ACKACT_bm | TWI_MCMD_RECVTRANS_gc; // else Send NAK
                                   ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp: In member function 'bool TinyMegaI2CMaster::write(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:55:12: error: 'TWI0' was not declared in this scope
   while (!(TWI0.MSTATUS & TWI_WIF_bm))
            ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:55:12: note: suggested alternative: 'TWA0'
   while (!(TWI0.MSTATUS & TWI_WIF_bm))
            ^~~~
            TWA0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:55:27: error: 'TWI_WIF_bm' was not declared in this scope
   while (!(TWI0.MSTATUS & TWI_WIF_bm))
                           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:55:27: note: suggested alternative: 'TWI_vect_num'
   while (!(TWI0.MSTATUS & TWI_WIF_bm))
                           ^~~~~~~~~~
                           TWI_vect_num
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:57:3: error: 'TWI0' was not declared in this scope
   TWI0.MDATA = data;
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:57:3: note: suggested alternative: 'TWA0'
   TWI0.MDATA = data;
   ^~~~
   TWA0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:58:17: error: 'TWI_MCMD_RECVTRANS_gc' was not declared in this scope
   TWI0.MCTRLB = TWI_MCMD_RECVTRANS_gc;   // Do nothing
                 ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:59:27: error: 'TWI_RXACK_bm' was not declared in this scope
   return !(TWI0.MSTATUS & TWI_RXACK_bm); // Returns true if slave gave an ACK
                           ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp: In member function 'bool TinyMegaI2CMaster::start(uint8_t, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:73:3: error: 'TWI0' was not declared in this scope
   TWI0.MADDR = address << 1 | read; // Send START condition
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:73:3: note: suggested alternative: 'TWA0'
   TWI0.MADDR = address << 1 | read; // Send START condition
   ^~~~
   TWA0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:74:28: error: 'TWI_WIF_bm' was not declared in this scope
   while (!(TWI0.MSTATUS & (TWI_WIF_bm | TWI_RIF_bm)))
                            ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:74:28: note: suggested alternative: 'TWI_vect_num'
   while (!(TWI0.MSTATUS & (TWI_WIF_bm | TWI_RIF_bm)))
                            ^~~~~~~~~~
                            TWI_vect_num
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:74:41: error: 'TWI_RIF_bm' was not declared in this scope
   while (!(TWI0.MSTATUS & (TWI_WIF_bm | TWI_RIF_bm)))
                                         ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:76:23: error: 'TWI_ARBLOST_bm' was not declared in this scope
   if ((TWI0.MSTATUS & TWI_ARBLOST_bm))
                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:78:27: error: 'TWI_RXACK_bm' was not declared in this scope
   return !(TWI0.MSTATUS & TWI_RXACK_bm); // Return true if slave gave an ACK
                           ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp: In member function 'void TinyMegaI2CMaster::stop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:88:3: error: 'TWI0' was not declared in this scope
   TWI0.MCTRLB = TWI_ACKACT_bm | TWI_MCMD_STOP_gc; // Send STOP
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:88:3: note: suggested alternative: 'TWA0'
   TWI0.MCTRLB = TWI_ACKACT_bm | TWI_MCMD_STOP_gc; // Send STOP
   ^~~~
   TWA0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:88:17: error: 'TWI_ACKACT_bm' was not declared in this scope
   TWI0.MCTRLB = TWI_ACKACT_bm | TWI_MCMD_STOP_gc; // Send STOP
                 ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:88:33: error: 'TWI_MCMD_STOP_gc' was not declared in this scope
   TWI0.MCTRLB = TWI_ACKACT_bm | TWI_MCMD_STOP_gc; // Send STOP
                                 ^~~~~~~~~~~~~~~~

examples/tinyI2CScanner

Result: FAIL

WARNING: library TinyMegaI2C claims to run on megaavr architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp: In member function 'void TinyMegaI2CMaster::init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:27:3: error: 'TWI0' was not declared in this scope
   TWI0.MBAUD = (uint8_t)baud;
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:27:3: note: suggested alternative: 'TWA0'
   TWI0.MBAUD = (uint8_t)baud;
   ^~~~
   TWA0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:28:17: error: 'TWI_ENABLE_bm' was not declared in this scope
   TWI0.MCTRLA = TWI_ENABLE_bm; // Enable as master, no interrupts
                 ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:29:18: error: 'TWI_BUSSTATE_IDLE_gc' was not declared in this scope
   TWI0.MSTATUS = TWI_BUSSTATE_IDLE_gc;
                  ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp: In member function 'uint8_t TinyMegaI2CMaster::read()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:36:12: error: 'TWI0' was not declared in this scope
   while (!(TWI0.MSTATUS & TWI_RIF_bm))
            ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:36:12: note: suggested alternative: 'TWA0'
   while (!(TWI0.MSTATUS & TWI_RIF_bm))
            ^~~~
            TWA0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:36:27: error: 'TWI_RIF_bm' was not declared in this scope
   while (!(TWI0.MSTATUS & TWI_RIF_bm))
                           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:38:18: error: 'TWI0' was not declared in this scope
   uint8_t data = TWI0.MDATA;
                  ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:38:18: note: suggested alternative: 'TWA0'
   uint8_t data = TWI0.MDATA;
                  ^~~~
                  TWA0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:41:19: error: 'TWI_MCMD_RECVTRANS_gc' was not declared in this scope
     TWI0.MCTRLB = TWI_MCMD_RECVTRANS_gc; // if ACK = more bytes to read
                   ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:43:19: error: 'TWI_ACKACT_bm' was not declared in this scope
     TWI0.MCTRLB = TWI_ACKACT_bm | TWI_MCMD_RECVTRANS_gc; // else Send NAK
                   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:43:35: error: 'TWI_MCMD_RECVTRANS_gc' was not declared in this scope
     TWI0.MCTRLB = TWI_ACKACT_bm | TWI_MCMD_RECVTRANS_gc; // else Send NAK
                                   ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp: In member function 'bool TinyMegaI2CMaster::write(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:55:12: error: 'TWI0' was not declared in this scope
   while (!(TWI0.MSTATUS & TWI_WIF_bm))
            ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:55:12: note: suggested alternative: 'TWA0'
   while (!(TWI0.MSTATUS & TWI_WIF_bm))
            ^~~~
            TWA0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:55:27: error: 'TWI_WIF_bm' was not declared in this scope
   while (!(TWI0.MSTATUS & TWI_WIF_bm))
                           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:55:27: note: suggested alternative: 'TWI_vect_num'
   while (!(TWI0.MSTATUS & TWI_WIF_bm))
                           ^~~~~~~~~~
                           TWI_vect_num
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:57:3: error: 'TWI0' was not declared in this scope
   TWI0.MDATA = data;
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:57:3: note: suggested alternative: 'TWA0'
   TWI0.MDATA = data;
   ^~~~
   TWA0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:58:17: error: 'TWI_MCMD_RECVTRANS_gc' was not declared in this scope
   TWI0.MCTRLB = TWI_MCMD_RECVTRANS_gc;   // Do nothing
                 ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:59:27: error: 'TWI_RXACK_bm' was not declared in this scope
   return !(TWI0.MSTATUS & TWI_RXACK_bm); // Returns true if slave gave an ACK
                           ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp: In member function 'bool TinyMegaI2CMaster::start(uint8_t, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:73:3: error: 'TWI0' was not declared in this scope
   TWI0.MADDR = address << 1 | read; // Send START condition
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:73:3: note: suggested alternative: 'TWA0'
   TWI0.MADDR = address << 1 | read; // Send START condition
   ^~~~
   TWA0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:74:28: error: 'TWI_WIF_bm' was not declared in this scope
   while (!(TWI0.MSTATUS & (TWI_WIF_bm | TWI_RIF_bm)))
                            ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:74:28: note: suggested alternative: 'TWI_vect_num'
   while (!(TWI0.MSTATUS & (TWI_WIF_bm | TWI_RIF_bm)))
                            ^~~~~~~~~~
                            TWI_vect_num
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:74:41: error: 'TWI_RIF_bm' was not declared in this scope
   while (!(TWI0.MSTATUS & (TWI_WIF_bm | TWI_RIF_bm)))
                                         ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:76:23: error: 'TWI_ARBLOST_bm' was not declared in this scope
   if ((TWI0.MSTATUS & TWI_ARBLOST_bm))
                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:78:27: error: 'TWI_RXACK_bm' was not declared in this scope
   return !(TWI0.MSTATUS & TWI_RXACK_bm); // Return true if slave gave an ACK
                           ^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp: In member function 'void TinyMegaI2CMaster::stop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:88:3: error: 'TWI0' was not declared in this scope
   TWI0.MCTRLB = TWI_ACKACT_bm | TWI_MCMD_STOP_gc; // Send STOP
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:88:3: note: suggested alternative: 'TWA0'
   TWI0.MCTRLB = TWI_ACKACT_bm | TWI_MCMD_STOP_gc; // Send STOP
   ^~~~
   TWA0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:88:17: error: 'TWI_ACKACT_bm' was not declared in this scope
   TWI0.MCTRLB = TWI_ACKACT_bm | TWI_MCMD_STOP_gc; // Send STOP
                 ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.cpp:88:33: error: 'TWI_MCMD_STOP_gc' was not declared in this scope
   TWI0.MCTRLB = TWI_ACKACT_bm | TWI_MCMD_STOP_gc; // Send STOP
                                 ^~~~~~~~~~~~~~~~

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

In file included from /tmp/arduino-testlib658903910/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.h:21:10: fatal error: avr/io.h: No such file or directory
 #include <avr/io.h>
          ^~~~~~~~~~
compilation terminated.

examples/tinyI2CScanner

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/examples/tinyI2CScanner/tinyI2CScanner.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.h:21:10: fatal error: avr/io.h: No such file or directory
 #include <avr/io.h>
          ^~~~~~~~~~
compilation terminated.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/tinyI2CScanner

Result: PASS

Sketch uses 3284 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 177 bytes (2%) of dynamic memory, leaving 5967 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

In file included from /tmp/arduino-testlib1233947739/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.h:21:10: fatal error: avr/io.h: No such file or directory
 #include <avr/io.h>
          ^~~~~~~~~~
compilation terminated.

examples/tinyI2CScanner

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/examples/tinyI2CScanner/tinyI2CScanner.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.h:21:10: fatal error: avr/io.h: No such file or directory
 #include <avr/io.h>
          ^~~~~~~~~~
compilation terminated.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

In file included from /tmp/arduino-testlib280474109/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.h:21:20: fatal error: avr/io.h: No such file or directory
compilation terminated.

examples/tinyI2CScanner

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/examples/tinyI2CScanner/tinyI2CScanner.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyMegaI2C/src/TinyMegaI2C.h:21:20: fatal error: avr/io.h: No such file or directory
compilation terminated.