This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 0.5.1
More details
| Board | Claims compatibility | Inclusion |
|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes ⚠️ | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
No ⚠️ | PASS |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS |
Result: PASS
Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 89 bytes (4%) of dynamic memory, leaving 1959 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
WARNING: library U8glib-HAL claims to run on avr, AVR, atmelavr, megaavr, megaAVR, sam, atmelsam, stm32, STM32, ststm32, STM32F1, stm32f4, STM32F4, stm32duino, teensy, esp, esp32, ESP32, espressif32, arduino_esp32, linux_x86_64, windows_x86 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib-HAL/src/clib/u8g_com_arduino_st7920_spi.c:55:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:76:9: error: unknown type name 'bool'
typedef bool boolean;
^~~~
~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib-HAL/src/clib/u8g_com_arduino_t6963.c:71:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:76:9: error: unknown type name 'bool'
typedef bool boolean;
^~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib-HAL/src/clib/u8g_com_io.cpp:71:8: error: 'DDRB' was not declared in this scope
, &DDRB
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib-HAL/src/clib/u8g_com_io.cpp:71:8: note: suggested alternative: 'DD0'
, &DDRB
^~~~
DD0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib-HAL/src/clib/u8g_com_io.cpp:118:3: error: cannot convert 'PORT_t* {aka PORT_struct*}' to 'const IO_PTR {aka volatile unsigned char* const}' in initialization
};
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib-HAL/src/clib/u8g_com_io.cpp:118:3: error: cannot convert 'PORT_t* {aka PORT_struct*}' to 'const IO_PTR {aka volatile unsigned char* const}' in initialization
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib-HAL/src/clib/u8g_com_io.cpp:118:3: error: cannot convert 'PORT_t* {aka PORT_struct*}' to 'const IO_PTR {aka volatile unsigned char* const}' in initialization
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib-HAL/src/clib/u8g_com_io.cpp:118:3: error: cannot convert 'PORT_t* {aka PORT_struct*}' to 'const IO_PTR {aka volatile unsigned char* const}' in initialization
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib-HAL/src/clib/u8g_com_io.cpp:118:3: error: cannot convert 'PORT_t* {aka PORT_struct*}' to 'const IO_PTR {aka volatile unsigned char* const}' in initialization
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib-HAL/src/clib/u8g_com_io.cpp:118:3: error: cannot convert 'PORT_t* {aka PORT_struct*}' to 'const IO_PTR {aka volatile unsigned char* const}' in initialization
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib-HAL/src/clib/u8g_com_io.cpp:126:8: error: 'PINB' was not declared in this scope
, &PINB
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib-HAL/src/clib/u8g_com_io.cpp:126:8: note: suggested alternative: 'PIN0'
, &PINB
^~~~
PIN0
^~~~
PSTR
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib-HAL/src/clib/u8g_com_arduino_hw_spi.c:220:40: error: 'SPR1' undeclared (first use in this function); did you mean 'SPE'?
SPCR = (1<<SPE) | (1<<MSTR)|(0<<SPR1)|(0<<SPR0)|(0<<CPOL)|(0<<CPHA);
^~~~
SPE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib-HAL/src/clib/u8g_com_arduino_hw_spi.c:220:50: error: 'SPR0' undeclared (first use in this function); did you mean 'SPR1'?
SPCR = (1<<SPE) | (1<<MSTR)|(0<<SPR1)|(0<<SPR0)|(0<<CPOL)|(0<<CPHA);
^~~~
SPR1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib-HAL/src/clib/u8g_com_arduino_hw_spi.c:220:60: error: 'CPOL' undeclared (first use in this function); did you mean 'CCL'?
SPCR = (1<<SPE) | (1<<MSTR)|(0<<SPR1)|(0<<SPR0)|(0<<CPOL)|(0<<CPHA);
^~~~
CCL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib-HAL/src/clib/u8g_com_arduino_hw_spi.c:220:70: error: 'CPHA' undeclared (first use in this function); did you mean 'CPOL'?
SPCR = (1<<SPE) | (1<<MSTR)|(0<<SPR1)|(0<<SPR0)|(0<<CPOL)|(0<<CPHA);
^~~~
CPOL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib-HAL/src/clib/u8g_com_arduino_hw_spi.c:226:9: error: 'SPSR' undeclared (first use in this function); did you mean 'SPCR'?
SPSR = (1 << SPI2X); /* double speed, issue 89 */
^~~~
SPCR
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib-HAL/src/clib/u8g_com_arduino_hw_spi.c:226:22: error: 'SPI2X' undeclared (first use in this function); did you mean 'SPI_t'?
SPSR = (1 << SPI2X); /* double speed, issue 89 */
^~~~~
SPI_t
/src/clib/u8g_com_atxmega_st7920_hw_spi.c:65:3: note: each undeclared identifier is reported only once for each function it appears in
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib-HAL/src/clib/u8g_com_atxmega_st7920_hw_spi.c: In function 'u8g_com_atxmega_st7920_hw_spi_fn':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib-HAL/src/clib/u8g_com_atxmega_st7920_hw_spi.c:115:7: error: 'SPIC' undeclared (first use in this function); did you mean 'SPI0'?
SPIC.CTRL = 0;
^~~~
SPI0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/U8glib-HAL/src/clib/u8g_com_atxmega_st7920_hw_spi.c:116:23: error: 'SPI_PRESCALER_DIV4_gc' undeclared (first use in this function); did you mean 'RTC_PRESCALER_DIV4_gc'?
SPIC.CTRL = SPI_PRESCALER_DIV4_gc | // SPI prescaler.
^~~~~~~~~~~~~~~~~~~~~
RTC_PRESCALER_DIV4_gc
Result: PASS
WARNING: library U8glib-HAL claims to run on avr, AVR, atmelavr, megaavr, megaAVR, sam, atmelsam, stm32, STM32, ststm32, STM32F1, stm32f4, STM32F4, stm32duino, teensy, esp, esp32, ESP32, espressif32, arduino_esp32, linux_x86_64, windows_x86 architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 203210 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.