This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 0.0.2
More details
| Board | Claims compatibility | Inclusion | UNIT_ENV_III |
|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
No | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No ⚠️ | PASS | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
No ⚠️ | PASS | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | PASS |
Result: FAIL
WARNING: library UNIT_ENV claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Result: FAIL
WARNING: library UNIT_ENV claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_ENV/examples/UNIT_ENV_III/UNIT_ENV_III.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_ENV/examples/UNIT_ENV_III/UNIT_ENV_III.ino:10:20: error: no matching function for call to 'TwoWire::begin(int, int)'
Wire.begin(21, 22);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_ENV/examples/UNIT_ENV_III/UNIT_ENV_III.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:53:10: note: candidate: void TwoWire::begin()
void begin();
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:53:10: note: candidate expects 0 arguments, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:54:10: note: candidate: void TwoWire::begin(uint8_t)
void begin(uint8_t);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:54:10: note: candidate expects 1 argument, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:55:10: note: candidate: void TwoWire::begin(int)
void begin(int);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:55:10: note: candidate expects 1 argument, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_ENV/examples/UNIT_ENV_III/UNIT_ENV_III.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_ENV/examples/UNIT_ENV_III/UNIT_ENV_III.ino:18:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Temperatura: %2.2f*C Humedad: %0.2f%% Pressure: %0.2fPa\r\n", sht30.cTemp, sht30.humidity, qmp6988.calcPressure());
^~~~~~
print
Result: PASS
WARNING: library UNIT_ENV claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
WARNING: library UNIT_ENV claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_ENV/examples/UNIT_ENV_III/UNIT_ENV_III.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_ENV/examples/UNIT_ENV_III/UNIT_ENV_III.ino:10:20: error: no matching function for call to 'arduino::MbedI2C::begin(int, int)'
Wire.begin(21, 22);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_ENV/examples/UNIT_ENV_III/UNIT_ENV_III.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:39:18: note: candidate: virtual void arduino::MbedI2C::begin()
virtual void begin();
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:39:18: note: candidate expects 0 arguments, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:43:18: note: candidate: virtual void arduino::MbedI2C::begin(uint8_t)
virtual void begin(uint8_t address);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:43:18: note: candidate expects 1 argument, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_ENV/examples/UNIT_ENV_III/UNIT_ENV_III.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_ENV/examples/UNIT_ENV_III/UNIT_ENV_III.ino:18:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Temperatura: %2.2f*C Humedad: %0.2f%% Pressure: %0.2fPa\r\n", sht30.cTemp, sht30.humidity, qmp6988.calcPressure());
^~~~~~
print
Result: FAIL
WARNING: library UNIT_ENV claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_ENV/src/DHT12.h:10:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_ENV/src/DHT12.cpp:7:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t DHT12::read()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: QMP6988.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_ENV/src/QMP6988.cpp:4:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:57:10: note: candidate: virtual void TwoWire::beginTransmission(uint8_t)
void beginTransmission(uint8_t);
Result: FAIL
WARNING: library UNIT_ENV claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_ENV/examples/UNIT_ENV_III/UNIT_ENV_III.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_ENV/examples/UNIT_ENV_III/UNIT_ENV_III.ino:10:20: error: no matching function for call to 'TwoWire::begin(int, int)'
Wire.begin(21, 22);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_ENV/examples/UNIT_ENV_III/UNIT_ENV_III.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:52:10: note: candidate: virtual void TwoWire::begin()
void begin();
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:52:10: note: candidate expects 0 arguments, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:53:10: note: candidate: virtual void TwoWire::begin(uint8_t)
void begin(uint8_t);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:53:10: note: candidate expects 1 argument, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:54:10: note: candidate: void TwoWire::begin(int)
void begin(int);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:54:10: note: candidate expects 1 argument, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_ENV/examples/UNIT_ENV_III/UNIT_ENV_III.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_ENV/examples/UNIT_ENV_III/UNIT_ENV_III.ino:18:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Temperatura: %2.2f*C Humedad: %0.2f%% Pressure: %0.2fPa\r\n", sht30.cTemp, sht30.humidity, qmp6988.calcPressure());
^~~~~~
print
Result: PASS
WARNING: library UNIT_ENV claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
WARNING: library UNIT_ENV claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_ENV/examples/UNIT_ENV_III/UNIT_ENV_III.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_ENV/examples/UNIT_ENV_III/UNIT_ENV_III.ino:18:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Temperatura: %2.2f*C Humedad: %0.2f%% Pressure: %0.2fPa\r\n", sht30.cTemp, sht30.humidity, qmp6988.calcPressure());
^~~~~~
print
Result: PASS
Sketch uses 202874 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13896 bytes (4%) of dynamic memory, leaving 313784 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 213754 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14248 bytes (4%) of dynamic memory, leaving 313432 bytes for local variables. Maximum is 327680 bytes.