This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 0.0.1
More details
| Board | Claims compatibility | Inclusion | MQTT |
|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
No | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
No | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | PASS |
Result: FAIL
WARNING: library UNIT_MQTT claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /tmp/arduino-testlib1480896561/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_MQTT/src/UNIT_MQTT.h:31:45: error: 'Serial2' was not declared in this scope
void Init(HardwareSerial *serial = &Serial2, int baud=9600, uint8_t RX = 16, uint8_t TX = 17);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_MQTT/src/UNIT_MQTT.h:31:45: note: suggested alternative: 'Serial'
void Init(HardwareSerial *serial = &Serial2, int baud=9600, uint8_t RX = 16, uint8_t TX = 17);
^~~~~~~
Serial
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Atom/src/utility/LED_DisPlay.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Atom/src/utility/LED_DisPlay.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Atom/src/utility/Task.h:4:10: fatal error: freertos/FreeRTOS.h: No such file or directory
#include <freertos/FreeRTOS.h>
^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "M5Atom.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Atom
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DEMO-BOARD
Result: FAIL
WARNING: library UNIT_MQTT claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_MQTT/src/UNIT_MQTT.cpp: In member function 'void UNIT_MQTT::Init(arduino::HardwareSerial*, int, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_MQTT/src/UNIT_MQTT.cpp:6:44: error: no matching function for call to 'arduino::HardwareSerial::begin(int&, long unsigned int, uint8_t&, uint8_t&)'
_serial->begin(baud, SERIAL_8N1, RX, TX);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Serial.h:25:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:102,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_MQTT/src/UNIT_MQTT.h:2,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_MQTT/src/UNIT_MQTT.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSerial.h:90:18: note: candidate: virtual void arduino::HardwareSerial::begin(long unsigned int)
virtual void begin(unsigned long) = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSerial.h:90:18: note: candidate expects 1 argument, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSerial.h:91:18: note: candidate: virtual void arduino::HardwareSerial::begin(long unsigned int, uint16_t)
virtual void begin(unsigned long baudrate, uint16_t config) = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSerial.h:91:18: note: candidate expects 2 arguments, 4 provided
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Atom/src/utility/LED_DisPlay.h:4,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Atom/src/utility/LED_DisPlay.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Atom/src/utility/LED_DisPlay.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Atom/src/utility/LED_DisPlay.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Atom/src/utility/Task.h:4:10: fatal error: freertos/FreeRTOS.h: No such file or directory
#include <freertos/FreeRTOS.h>
^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "M5Atom.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Atom
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DEMO-BOARD
Result: FAIL
WARNING: library UNIT_MQTT claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /tmp/arduino-testlib3070153728/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_MQTT/src/UNIT_MQTT.h:31:45: error: 'Serial2' was not declared in this scope
void Init(HardwareSerial *serial = &Serial2, int baud=9600, uint8_t RX = 16, uint8_t TX = 17);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_MQTT/src/UNIT_MQTT.h:31:45: note: suggested alternative: 'Serial1'
void Init(HardwareSerial *serial = &Serial2, int baud=9600, uint8_t RX = 16, uint8_t TX = 17);
^~~~~~~
Serial1
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Atom/src/utility/LED_DisPlay.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Atom/src/utility/LED_DisPlay.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Atom/src/utility/Task.h:4:10: fatal error: freertos/FreeRTOS.h: No such file or directory
#include <freertos/FreeRTOS.h>
^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "M5Atom.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Atom
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DEMO-BOARD
Result: FAIL
WARNING: library UNIT_MQTT claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_MQTT/src/UNIT_MQTT.cpp: In member function 'void UNIT_MQTT::Init(arduino::HardwareSerial*, int, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_MQTT/src/UNIT_MQTT.cpp:6:44: error: no matching function for call to 'arduino::HardwareSerial::begin(int&, long unsigned int, uint8_t&, uint8_t&)'
_serial->begin(baud, SERIAL_8N1, RX, TX);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:21:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_MQTT/src/UNIT_MQTT.h:2,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_MQTT/src/UNIT_MQTT.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:90:18: note: candidate: virtual void arduino::HardwareSerial::begin(long unsigned int)
virtual void begin(unsigned long) = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:90:18: note: candidate expects 1 argument, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:91:18: note: candidate: virtual void arduino::HardwareSerial::begin(long unsigned int, uint16_t)
virtual void begin(unsigned long baudrate, uint16_t config) = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:91:18: note: candidate expects 2 arguments, 4 provided
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Atom/src/utility/LED_DisPlay.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Atom/src/utility/LED_DisPlay.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Atom/src/utility/Task.h:4:10: fatal error: freertos/FreeRTOS.h: No such file or directory
#include <freertos/FreeRTOS.h>
^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "M5Atom.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Atom
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DEMO-BOARD
Result: PASS
Sketch uses 200646 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13192 bytes (4%) of dynamic memory, leaving 314488 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 287398 bytes (21%) of program storage space. Maximum is 1310720 bytes.
Global variables use 15316 bytes (4%) of dynamic memory, leaving 312364 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Atom/src/utility/LED_DisPlay.h:4,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Atom/src/utility/LED_DisPlay.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^