UNIT_UHF_RFID - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

UNIT_UHF_RFID

Version: 0.0.1
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	polling
arduino:avr:uno 1.8.4	No	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	No	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL

WARNING: library UNIT_UHF_RFID claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /tmp/arduino-testlib155016015/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_UHF_RFID/src/UNIT_UHF_RFID.h:41:40: error: 'Serial2' was not declared in this scope
   void begin(HardwareSerial *serial = &Serial2, int baud=115200, uint8_t RX = 16, uint8_t TX = 17, bool debug = false);
                                        ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_UHF_RFID/src/UNIT_UHF_RFID.h:41:40: note: suggested alternative: 'Serial'
   void begin(HardwareSerial *serial = &Serial2, int baud=115200, uint8_t RX = 16, uint8_t TX = 17, bool debug = false);
                                        ^~~~~~~
                                        Serial

examples/polling

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_UHF_RFID/examples/polling/polling.ino:19:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Stack/src/M5Stack.h:172:6: error: #error "This library only supports boards with ESP32 processor."
     #error "This library only supports boards with ESP32 processor."
      ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_UHF_RFID/examples/polling/polling.ino:20:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5GFX/src/M5GFX.h:12:10: fatal error: FS.h: No such file or directory
 #include <FS.h>
          ^~~~~~
compilation terminated.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

WARNING: library UNIT_UHF_RFID claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_UHF_RFID/src/UNIT_UHF_RFID.cpp: In member function 'void JRD_4035::begin(arduino::HardwareSerial*, int, uint8_t, uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_UHF_RFID/src/UNIT_UHF_RFID.cpp:21:42: error: no matching function for call to 'arduino::HardwareSerial::begin(int&, long unsigned int, uint8_t&, uint8_t&)'
   _serial->begin(baud, SERIAL_8N1, RX, TX);
                                          ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Serial.h:25:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:102,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_UHF_RFID/src/UNIT_UHF_RFID.h:4,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_UHF_RFID/src/UNIT_UHF_RFID.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSerial.h:90:18: note: candidate: virtual void arduino::HardwareSerial::begin(long unsigned int)
     virtual void begin(unsigned long) = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSerial.h:90:18: note:   candidate expects 1 argument, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSerial.h:91:18: note: candidate: virtual void arduino::HardwareSerial::begin(long unsigned int, uint16_t)
     virtual void begin(unsigned long baudrate, uint16_t config) = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSerial.h:91:18: note:   candidate expects 2 arguments, 4 provided

examples/polling

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_UHF_RFID/examples/polling/polling.ino:19:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Stack/src/M5Stack.h:172:6: error: #error "This library only supports boards with ESP32 processor."
     #error "This library only supports boards with ESP32 processor."
      ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_UHF_RFID/examples/polling/polling.ino:20:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5GFX/src/M5GFX.h:12:10: fatal error: FS.h: No such file or directory
 #include <FS.h>
          ^~~~~~
compilation terminated.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL

WARNING: library UNIT_UHF_RFID claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /tmp/arduino-testlib2103231287/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_UHF_RFID/src/UNIT_UHF_RFID.h:41:40: error: 'Serial2' was not declared in this scope
   void begin(HardwareSerial *serial = &Serial2, int baud=115200, uint8_t RX = 16, uint8_t TX = 17, bool debug = false);
                                        ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_UHF_RFID/src/UNIT_UHF_RFID.h:41:40: note: suggested alternative: 'Serial1'
   void begin(HardwareSerial *serial = &Serial2, int baud=115200, uint8_t RX = 16, uint8_t TX = 17, bool debug = false);
                                        ^~~~~~~
                                        Serial1

examples/polling

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_UHF_RFID/examples/polling/polling.ino:19:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Stack/src/M5Stack.h:172:6: error: #error "This library only supports boards with ESP32 processor."
     #error "This library only supports boards with ESP32 processor."
      ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_UHF_RFID/examples/polling/polling.ino:20:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5GFX/src/M5GFX.h:12:10: fatal error: FS.h: No such file or directory
 #include <FS.h>
          ^~~~~~
compilation terminated.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

WARNING: library UNIT_UHF_RFID claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_UHF_RFID/src/UNIT_UHF_RFID.cpp: In member function 'void JRD_4035::begin(arduino::HardwareSerial*, int, uint8_t, uint8_t, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_UHF_RFID/src/UNIT_UHF_RFID.cpp:21:42: error: no matching function for call to 'arduino::HardwareSerial::begin(int&, long unsigned int, uint8_t&, uint8_t&)'
   _serial->begin(baud, SERIAL_8N1, RX, TX);
                                          ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_UHF_RFID/src/UNIT_UHF_RFID.h:4,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_UHF_RFID/src/UNIT_UHF_RFID.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:90:18: note: candidate: virtual void arduino::HardwareSerial::begin(long unsigned int)
     virtual void begin(unsigned long) = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:90:18: note:   candidate expects 1 argument, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:91:18: note: candidate: virtual void arduino::HardwareSerial::begin(long unsigned int, uint16_t)
     virtual void begin(unsigned long baudrate, uint16_t config) = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:91:18: note:   candidate expects 2 arguments, 4 provided

examples/polling

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_UHF_RFID/examples/polling/polling.ino:19:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Stack/src/M5Stack.h:172:6: error: #error "This library only supports boards with ESP32 processor."
     #error "This library only supports boards with ESP32 processor."
      ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_UHF_RFID/examples/polling/polling.ino:20:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5GFX/src/M5GFX.h:12:10: fatal error: FS.h: No such file or directory
 #include <FS.h>
          ^~~~~~
compilation terminated.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 200758 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13192 bytes (4%) of dynamic memory, leaving 314488 bytes for local variables. Maximum is 327680 bytes.

examples/polling

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2Card.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/SdFat.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/SD.h:20,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M5Stack/src/M5Stack.h:106,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UNIT_UHF_RFID/examples/polling/polling.ino:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2PinMap.h:524:2: error: #error Architecture or board not supported.
 #error Architecture or board not supported.
  ^
Multiple libraries were found for "SD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SD
Multiple libraries were found for "WiFiClient.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/WiFi
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi_Link
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT
Multiple libraries were found for "WiFiClientSecure.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/WiFiClientSecure
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Multiple libraries were found for "HTTPClient.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/HTTPClient
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi