This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.0
More details
| Board | Claims compatibility | Inclusion | USB_Blaster |
|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
No ⚠️ | PASS | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No ⚠️ | PASS | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No ⚠️ | PASS | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
No ⚠️ | PASS | FAIL |
Result: PASS
This library has no main header file so an empty one was created.
WARNING: library USBBlaster claims to run on samd, samd_beta architecture(s) and may be incompatible with your current board which runs on avr architecture(s). Library USBBlaster has been declared precompiled: Precompiled library in "/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/src/atmega328p" not found Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
WARNING: library USBBlaster claims to run on samd, samd_beta architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/src/Blaster.h:1:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/examples/USB_Blaster/USB_Blaster.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/src/USBConfig.h:12:2: error: #error USBBlaster can only be used with an USB MCU.
#error USBBlaster can only be used with an USB MCU.
^~~~~
Result: PASS
WARNING: library USBBlaster claims to run on samd, samd_beta architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Library USBBlaster has been declared precompiled: Using precompiled library in /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/src/cortex-m0plus Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
WARNING: library USBBlaster claims to run on samd, samd_beta architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/src/Blaster.h:1:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/examples/USB_Blaster/USB_Blaster.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/src/USBConfig.h:12:2: error: #error USBBlaster can only be used with an USB MCU.
#error USBBlaster can only be used with an USB MCU.
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/src/USBConfig.h:66:2: error: #error "Unsupported architecture"
#error "Unsupported architecture"
^~~~~
Result: PASS
WARNING: library USBBlaster claims to run on samd, samd_beta architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Library USBBlaster has been declared precompiled: Precompiled library in "/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/src/atmega4809" not found The platform does not support 'compiler.libraries.ldflags' for precompiled libraries. Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes. Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
WARNING: library USBBlaster claims to run on samd, samd_beta architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/src/Blaster.h:1:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/examples/USB_Blaster/USB_Blaster.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/src/USBConfig.h:12:2: error: #error USBBlaster can only be used with an USB MCU.
#error USBBlaster can only be used with an USB MCU.
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/src/USBConfig.h:66:2: error: #error "Unsupported architecture"
#error "Unsupported architecture"
^~~~~
Result: PASS
This library has no main header file so an empty one was created.
Library USBBlaster has been declared precompiled: Using precompiled library in /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/src/cortex-m0plus Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/src/Blaster.h:1:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/examples/USB_Blaster/USB_Blaster.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/src/USBConfig.h:51:10: fatal error: USB/PluggableUSB.h: No such file or directory
#include "USB/PluggableUSB.h"
^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: PASS
WARNING: library USBBlaster claims to run on samd, samd_beta architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Library USBBlaster has been declared precompiled: Precompiled library in "/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/src/esp32" not found Sketch uses 197736 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13084 bytes (3%) of dynamic memory, leaving 314596 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
WARNING: library USBBlaster claims to run on samd, samd_beta architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/src/Blaster.h:1:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/examples/USB_Blaster/USB_Blaster.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/src/USBConfig.h:12:2: error: #error USBBlaster can only be used with an USB MCU.
#error USBBlaster can only be used with an USB MCU.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/USBBlaster/src/USBConfig.h:66:2: error: #error "Unsupported architecture"
#error "Unsupported architecture"
^