This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.4
More details
| Board | Claims compatibility | Inclusion | DS3231_Tx_periodico |
GPS_ublox_periodico |
ID_PAC |
Recepcion_local |
Simple_uplink |
alarma_piezoelectrica |
humedad_de_suelo |
32U4_ULTRA_LOW_POWER |
temperatura_humedad |
Seguimiento_de_activos |
Serial_Wisol |
softrtc_ufox |
DS3231_alarm_depsleep |
temperatura_humedad_deepsleep |
Simple_downlink |
Envio_local |
interrupcion_piezoelectrico |
Blink_Ufox |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | PASS | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No ⚠️ | PASS | FAIL | FAIL | PASS | PASS | PASS | PASS | PASS | FAIL | PASS | PASS | PASS | FAIL | FAIL | FAIL | PASS | PASS | PASS | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No ⚠️ | PASS | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | FAIL | PASS | PASS | PASS | FAIL | FAIL | FAIL | PASS | PASS | PASS | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
No ⚠️ | PASS | FAIL | FAIL | PASS | PASS | PASS | PASS | PASS | FAIL | PASS | PASS | PASS | FAIL | FAIL | FAIL | PASS | PASS | PASS | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
No ⚠️ | PASS | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | FAIL | PASS | PASS | PASS | FAIL | FAIL | FAIL | PASS | PASS | PASS | FAIL |
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'void Ufox::begin(uint16_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: error: 'Serial1' was not declared in this scope Serial1.begin(baud_ws ); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: note: suggested alternative: 'Serial' Serial1.begin(baud_ws ); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command2(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'void Ufox::begin(uint16_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: error: 'Serial1' was not declared in this scope Serial1.begin(baud_ws ); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: note: suggested alternative: 'Serial' Serial1.begin(baud_ws ); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command2(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial Multiple libraries were found for "LowPower.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power Multiple libraries were found for "SoftwareSerial.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino: In function 'void loop()': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino:24:3: error: 'TXLED0' was not declared in this scope TXLED0; // apagar TXLED ^~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino:24:3: note: suggested alternative: 'RXLED' TXLED0; // apagar TXLED ^~~~~~ RXLED /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino:27:3: error: 'TXLED1' was not declared in this scope TXLED1; //TXLED macro, encender TXLED ^~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino:27:3: note: suggested alternative: 'RXLED' TXLED1; //TXLED macro, encender TXLED ^~~~~~ RXLED
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/DS3231_Tx_periodico/DS3231_Tx_periodico.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/DS3231_Tx_periodico/DS3231_Tx_periodico.ino:94:5: error: 'TXLED0' was not declared in this scope
TXLED0; //apagar leds para ahorrar energia
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/DS3231_Tx_periodico/DS3231_Tx_periodico.ino:94:5: note: suggested alternative: 'RXLED'
TXLED0; //apagar leds para ahorrar energia
^~~~~~
RXLED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/DS3231_Tx_periodico/DS3231_Tx_periodico.ino:101:5: error: 'TXLED1' was not declared in this scope
TXLED1;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/DS3231_Tx_periodico/DS3231_Tx_periodico.ino:101:5: note: suggested alternative: 'RXLED'
TXLED1;
^~~~~~
RXLED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/DS3231_Tx_periodico/DS3231_Tx_periodico.ino: In function 'void Tx()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/DS3231_Tx_periodico/DS3231_Tx_periodico.ino:144:7: error: 'Serial1' was not declared in this scope
Serial1.end();
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/DS3231_Tx_periodico/DS3231_Tx_periodico.ino:144:7: note: suggested alternative: 'Serial'
Serial1.end();
^~~~~~~
Serial
Multiple libraries were found for "LowPower.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power
Multiple libraries were found for "RTClib.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTClib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTCLib_by_NeiroN
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicsLibrary
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/DS3231_alarm_depsleep/DS3231_alarm_depsleep.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/DS3231_alarm_depsleep/DS3231_alarm_depsleep.ino:88:5: error: 'TXLED1' was not declared in this scope
TXLED1;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/DS3231_alarm_depsleep/DS3231_alarm_depsleep.ino:88:5: note: suggested alternative: 'IDLE_1'
TXLED1;
^~~~~~
IDLE_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/DS3231_alarm_depsleep/DS3231_alarm_depsleep.ino:92:5: error: 'TXLED0' was not declared in this scope
TXLED0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/DS3231_alarm_depsleep/DS3231_alarm_depsleep.ino:92:5: note: suggested alternative: 'TXEN0'
TXLED0;
^~~~~~
TXEN0
Multiple libraries were found for "LowPower.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power
Multiple libraries were found for "RTClib.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTClib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicsLibrary
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTCLib_by_NeiroN
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'void Ufox::begin(uint16_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: error: 'Serial1' was not declared in this scope Serial1.begin(baud_ws ); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: note: suggested alternative: 'Serial' Serial1.begin(baud_ws ); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command2(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'void Ufox::begin(uint16_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: error: 'Serial1' was not declared in this scope Serial1.begin(baud_ws ); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: note: suggested alternative: 'Serial' Serial1.begin(baud_ws ); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command2(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial Multiple libraries were found for "SoftwareSerial.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'void Ufox::begin(uint16_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: error: 'Serial1' was not declared in this scope Serial1.begin(baud_ws ); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: note: suggested alternative: 'Serial' Serial1.begin(baud_ws ); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command2(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'void Ufox::begin(uint16_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: error: 'Serial1' was not declared in this scope Serial1.begin(baud_ws ); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: note: suggested alternative: 'Serial' Serial1.begin(baud_ws ); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command2(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'void Ufox::begin(uint16_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: error: 'Serial1' was not declared in this scope Serial1.begin(baud_ws ); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: note: suggested alternative: 'Serial' Serial1.begin(baud_ws ); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command2(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Serial_Wisol/Serial_Wisol.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Serial_Wisol/Serial_Wisol.ino:34:3: error: 'Serial1' was not declared in this scope
Serial1.begin(9600);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Serial_Wisol/Serial_Wisol.ino:34:3: note: suggested alternative: 'Serial'
Serial1.begin(9600);
^~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Serial_Wisol/Serial_Wisol.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Serial_Wisol/Serial_Wisol.ino:43:5: error: 'Serial1' was not declared in this scope
Serial1.write(Serial.read());
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Serial_Wisol/Serial_Wisol.ino:43:5: note: suggested alternative: 'Serial'
Serial1.write(Serial.read());
^~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Serial_Wisol/Serial_Wisol.ino:45:10: error: 'Serial1' was not declared in this scope
while (Serial1.available()) {
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Serial_Wisol/Serial_Wisol.ino:45:10: note: suggested alternative: 'Serial'
while (Serial1.available()) {
^~~~~~~
Serial
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'void Ufox::begin(uint16_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: error: 'Serial1' was not declared in this scope Serial1.begin(baud_ws ); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: note: suggested alternative: 'Serial' Serial1.begin(baud_ws ); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command2(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'void Ufox::begin(uint16_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: error: 'Serial1' was not declared in this scope Serial1.begin(baud_ws ); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: note: suggested alternative: 'Serial' Serial1.begin(baud_ws ); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command2(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'void Ufox::begin(uint16_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: error: 'Serial1' was not declared in this scope Serial1.begin(baud_ws ); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: note: suggested alternative: 'Serial' Serial1.begin(baud_ws ); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command2(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'void Ufox::begin(uint16_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: error: 'Serial1' was not declared in this scope Serial1.begin(baud_ws ); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: note: suggested alternative: 'Serial' Serial1.begin(baud_ws ); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command2(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial
Result: PASS
Sketch uses 2164 bytes (6%) of program storage space. Maximum is 32256 bytes. Global variables use 194 bytes (9%) of dynamic memory, leaving 1854 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/softrtc_ufox/softrtc_ufox.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/softrtc_ufox/softrtc_ufox.ino:89:5: error: 'TXLED0' was not declared in this scope
TXLED0; // apagar TXLED
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/softrtc_ufox/softrtc_ufox.ino:89:5: note: suggested alternative: 'RXLED'
TXLED0; // apagar TXLED
^~~~~~
RXLED
Multiple libraries were found for "RTClib.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTClib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicsLibrary
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTCLib_by_NeiroN
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'void Ufox::begin(uint16_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: error: 'Serial1' was not declared in this scope Serial1.begin(baud_ws ); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: note: suggested alternative: 'Serial' Serial1.begin(baud_ws ); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command2(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial Multiple libraries were found for "DHT.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHT_sensor_library Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NanoPlayBoard Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uKit_Explore Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_Temperature_And_Humidity_Sensor Multiple libraries were found for "Adafruit_Sensor.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_Unified_Sensor Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArdUAV Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ClimaStick
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'void Ufox::begin(uint16_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: error: 'Serial1' was not declared in this scope Serial1.begin(baud_ws ); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:39:3: note: suggested alternative: 'Serial' Serial1.begin(baud_ws ); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:64:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp: In member function 'String Ufox::command2(String)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: error: 'Serial1' was not declared in this scope Serial1.println(cmd); ^~~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/Ufox.cpp:123:3: note: suggested alternative: 'Serial' Serial1.println(cmd); ^~~~~~~ Serial Multiple libraries were found for "LowPower.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power Multiple libraries were found for "DHT.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHT_sensor_library Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_Temperature_And_Humidity_Sensor Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NanoPlayBoard Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uKit_Explore Multiple libraries were found for "Adafruit_Sensor.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_Unified_Sensor Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ClimaStick Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArdUAV
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
#include <util/delay_basic.h>
^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Multiple libraries were found for "LowPower.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino: In function 'void loop()': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino:24:3: error: 'TXLED0' was not declared in this scope TXLED0; // apagar TXLED ^~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino:24:3: note: suggested alternative: 'RXLED' TXLED0; // apagar TXLED ^~~~~~ RXLED /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino:27:3: error: 'TXLED1' was not declared in this scope TXLED1; //TXLED macro, encender TXLED ^~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino:27:3: note: suggested alternative: 'RXLED' TXLED1; //TXLED macro, encender TXLED ^~~~~~ RXLED
Result: FAIL
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/DS3231_Tx_periodico/DS3231_Tx_periodico.ino:14:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
#error "Please ensure chosen MCU is a SAMD21"
^~~~~
Multiple libraries were found for "RTClib.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTClib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTCLib_by_NeiroN
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicsLibrary
Multiple libraries were found for "LowPower.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power
Result: FAIL
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/DS3231_alarm_depsleep/DS3231_alarm_depsleep.ino:14:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
#error "Please ensure chosen MCU is a SAMD21"
^~~~~
Multiple libraries were found for "RTClib.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTClib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTCLib_by_NeiroN
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicsLibrary
Multiple libraries were found for "LowPower.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 80766 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43584 bytes (16%) of dynamic memory, leaving 226752 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
#include <util/delay_basic.h>
^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 80520 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43584 bytes (16%) of dynamic memory, leaving 226752 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 80242 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43584 bytes (16%) of dynamic memory, leaving 226752 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 81774 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43584 bytes (16%) of dynamic memory, leaving 226752 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 78924 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 81252 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43584 bytes (16%) of dynamic memory, leaving 226752 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 80994 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43584 bytes (16%) of dynamic memory, leaving 226752 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 82866 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43840 bytes (16%) of dynamic memory, leaving 226496 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 82390 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43656 bytes (16%) of dynamic memory, leaving 226680 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 80186 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43700 bytes (16%) of dynamic memory, leaving 226636 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/softrtc_ufox/softrtc_ufox.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/softrtc_ufox/softrtc_ufox.ino:89:5: error: 'TXLED0' was not declared in this scope
TXLED0; // apagar TXLED
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/softrtc_ufox/softrtc_ufox.ino:89:5: note: suggested alternative: 'RXLED'
TXLED0; // apagar TXLED
^~~~~~
RXLED
Multiple libraries were found for "RTClib.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTClib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTCLib_by_NeiroN
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicsLibrary
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 85472 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43604 bytes (16%) of dynamic memory, leaving 226732 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/temperatura_humedad_deepsleep/temperatura_humedad_deepsleep.ino:25:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
#error "Please ensure chosen MCU is a SAMD21"
^~~~~
Multiple libraries were found for "LowPower.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power
Multiple libraries were found for "DHT.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHT_sensor_library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_Temperature_And_Humidity_Sensor
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NanoPlayBoard
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uKit_Explore
Multiple libraries were found for "Adafruit_Sensor.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_Unified_Sensor
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArdUAV
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ClimaStick
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 2832 bytes (5%) of program storage space. Maximum is 49152 bytes. Global variables use 332 bytes (5%) of dynamic memory, leaving 5812 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/32U4_ULTRA_LOW_POWER/32U4_ULTRA_LOW_POWER.ino:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
#error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
^~~~~
Multiple libraries were found for "LowPower.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power
Multiple libraries were found for "SoftwareSerial.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino: In function 'void loop()': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino:24:3: error: 'TXLED0' was not declared in this scope TXLED0; // apagar TXLED ^~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino:24:3: note: suggested alternative: 'RXLED' TXLED0; // apagar TXLED ^~~~~~ RXLED /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino:27:3: error: 'TXLED1' was not declared in this scope TXLED1; //TXLED macro, encender TXLED ^~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino:27:3: note: suggested alternative: 'RXLED' TXLED1; //TXLED macro, encender TXLED ^~~~~~ RXLED
Result: FAIL
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/DS3231_Tx_periodico/DS3231_Tx_periodico.ino:14:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
#error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
^~~~~
Multiple libraries were found for "LowPower.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power
Multiple libraries were found for "RTClib.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTClib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTCLib_by_NeiroN
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicsLibrary
Result: FAIL
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/DS3231_alarm_depsleep/DS3231_alarm_depsleep.ino:14:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
#error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
^~~~~
Multiple libraries were found for "RTClib.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTClib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicsLibrary
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTCLib_by_NeiroN
Multiple libraries were found for "LowPower.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 6147 bytes (12%) of program storage space. Maximum is 49152 bytes. Global variables use 437 bytes (7%) of dynamic memory, leaving 5707 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 14331 bytes (29%) of program storage space. Maximum is 49152 bytes. Global variables use 855 bytes (13%) of dynamic memory, leaving 5289 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 5905 bytes (12%) of program storage space. Maximum is 49152 bytes. Global variables use 437 bytes (7%) of dynamic memory, leaving 5707 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 5593 bytes (11%) of program storage space. Maximum is 49152 bytes. Global variables use 437 bytes (7%) of dynamic memory, leaving 5707 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 8480 bytes (17%) of program storage space. Maximum is 49152 bytes. Global variables use 437 bytes (7%) of dynamic memory, leaving 5707 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 3041 bytes (6%) of program storage space. Maximum is 49152 bytes. Global variables use 332 bytes (5%) of dynamic memory, leaving 5812 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 7963 bytes (16%) of program storage space. Maximum is 49152 bytes. Global variables use 437 bytes (7%) of dynamic memory, leaving 5707 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 7947 bytes (16%) of program storage space. Maximum is 49152 bytes. Global variables use 441 bytes (7%) of dynamic memory, leaving 5703 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 8961 bytes (18%) of program storage space. Maximum is 49152 bytes. Global variables use 634 bytes (10%) of dynamic memory, leaving 5510 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 8518 bytes (17%) of program storage space. Maximum is 49152 bytes. Global variables use 437 bytes (7%) of dynamic memory, leaving 5707 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 3659 bytes (7%) of program storage space. Maximum is 49152 bytes. Global variables use 371 bytes (6%) of dynamic memory, leaving 5773 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/softrtc_ufox/softrtc_ufox.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/softrtc_ufox/softrtc_ufox.ino:89:5: error: 'TXLED0' was not declared in this scope
TXLED0; // apagar TXLED
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/softrtc_ufox/softrtc_ufox.ino:89:5: note: suggested alternative: 'RXLED'
TXLED0; // apagar TXLED
^~~~~~
RXLED
Multiple libraries were found for "RTClib.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTClib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTCLib_by_NeiroN
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicsLibrary
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 10400 bytes (21%) of program storage space. Maximum is 49152 bytes. Global variables use 456 bytes (7%) of dynamic memory, leaving 5688 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/temperatura_humedad_deepsleep/temperatura_humedad_deepsleep.ino:25:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:148:6: error: #error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
#error "Please ensure chosen MCU is either 88, 168, 168P, 328P, 32U4, 2560 or 256RFR2."
^~~~~
Multiple libraries were found for "DHT.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHT_sensor_library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NanoPlayBoard
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uKit_Explore
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_Temperature_And_Humidity_Sensor
Multiple libraries were found for "Adafruit_Sensor.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_Unified_Sensor
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ClimaStick
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArdUAV
Multiple libraries were found for "LowPower.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 12152 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
#include <util/delay_basic.h>
^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "LowPower.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power
Multiple libraries were found for "SoftwareSerial.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino: In function 'void loop()': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino:24:3: error: 'TXLED0' was not declared in this scope TXLED0; // apagar TXLED ^~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino:24:3: note: suggested alternative: 'RXLED' TXLED0; // apagar TXLED ^~~~~~ RXLED /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino:27:3: error: 'TXLED1' was not declared in this scope TXLED1; //TXLED macro, encender TXLED ^~~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino:27:3: note: suggested alternative: 'RXLED' TXLED1; //TXLED macro, encender TXLED ^~~~~~ RXLED
Result: FAIL
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/DS3231_Tx_periodico/DS3231_Tx_periodico.ino:14:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
#error "Please ensure chosen MCU is a SAMD21"
^~~~~
Multiple libraries were found for "LowPower.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power
Multiple libraries were found for "RTClib.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTClib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicsLibrary
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTCLib_by_NeiroN
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/DS3231_alarm_depsleep/DS3231_alarm_depsleep.ino:14:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
#error "Please ensure chosen MCU is a SAMD21"
^~~~~
Multiple libraries were found for "RTClib.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTClib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTCLib_by_NeiroN
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicsLibrary
Multiple libraries were found for "LowPower.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 14100 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3132 bytes (9%) of dynamic memory, leaving 29636 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
#include <util/delay_basic.h>
^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 13916 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3132 bytes (9%) of dynamic memory, leaving 29636 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 13628 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3132 bytes (9%) of dynamic memory, leaving 29636 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 31820 bytes (12%) of program storage space. Maximum is 262144 bytes. Global variables use 3500 bytes (10%) of dynamic memory, leaving 29268 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 12456 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 31236 bytes (11%) of program storage space. Maximum is 262144 bytes. Global variables use 3500 bytes (10%) of dynamic memory, leaving 29268 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 31100 bytes (11%) of program storage space. Maximum is 262144 bytes. Global variables use 3500 bytes (10%) of dynamic memory, leaving 29268 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 32228 bytes (12%) of program storage space. Maximum is 262144 bytes. Global variables use 3652 bytes (11%) of dynamic memory, leaving 29116 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 31900 bytes (12%) of program storage space. Maximum is 262144 bytes. Global variables use 3500 bytes (10%) of dynamic memory, leaving 29268 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 12816 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 3144 bytes (9%) of dynamic memory, leaving 29624 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/softrtc_ufox/softrtc_ufox.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/softrtc_ufox/softrtc_ufox.ino:89:5: error: 'TXLED0' was not declared in this scope
TXLED0; // apagar TXLED
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/softrtc_ufox/softrtc_ufox.ino:89:5: note: suggested alternative: 'RXLED'
TXLED0; // apagar TXLED
^~~~~~
RXLED
Multiple libraries were found for "RTClib.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTClib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicsLibrary
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTCLib_by_NeiroN
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 35620 bytes (13%) of program storage space. Maximum is 262144 bytes. Global variables use 3520 bytes (10%) of dynamic memory, leaving 29248 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/temperatura_humedad_deepsleep/temperatura_humedad_deepsleep.ino:25:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:161:6: error: #error "Please ensure chosen MCU is a SAMD21"
#error "Please ensure chosen MCU is a SAMD21"
^~~~~
Multiple libraries were found for "LowPower.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power
Multiple libraries were found for "DHT.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHT_sensor_library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_Temperature_And_Humidity_Sensor
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NanoPlayBoard
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uKit_Explore
Multiple libraries were found for "Adafruit_Sensor.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_Unified_Sensor
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ClimaStick
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArdUAV
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 200778 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13192 bytes (4%) of dynamic memory, leaving 314488 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/32U4_ULTRA_LOW_POWER/32U4_ULTRA_LOW_POWER.ino:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:166:5: error: #error "Processor architecture is not supported."
#error "Processor architecture is not supported."
^
Multiple libraries were found for "LowPower.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power
Multiple libraries were found for "SoftwareSerial.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino: In function 'void loop()': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino:24:3: error: 'TXLED0' was not declared in this scope TXLED0; // apagar TXLED ^ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/Blink_Ufox/Blink_Ufox.ino:27:3: error: 'TXLED1' was not declared in this scope TXLED1; //TXLED macro, encender TXLED ^
Result: FAIL
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/DS3231_Tx_periodico/DS3231_Tx_periodico.ino:14:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:166:5: error: #error "Processor architecture is not supported."
#error "Processor architecture is not supported."
^
Multiple libraries were found for "RTClib.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTClib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicsLibrary
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTCLib_by_NeiroN
Multiple libraries were found for "LowPower.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power
Result: FAIL
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/DS3231_alarm_depsleep/DS3231_alarm_depsleep.ino:14:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:166:5: error: #error "Processor architecture is not supported."
#error "Processor architecture is not supported."
^
Multiple libraries were found for "RTClib.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTClib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicsLibrary
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTCLib_by_NeiroN
Multiple libraries were found for "LowPower.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 207026 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13560 bytes (4%) of dynamic memory, leaving 314120 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 268310 bytes (20%) of program storage space. Maximum is 1310720 bytes. Global variables use 14648 bytes (4%) of dynamic memory, leaving 313032 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 206726 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13560 bytes (4%) of dynamic memory, leaving 314120 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 206354 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13560 bytes (4%) of dynamic memory, leaving 314120 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 208270 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13560 bytes (4%) of dynamic memory, leaving 314120 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 204610 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13416 bytes (4%) of dynamic memory, leaving 314264 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 207626 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13560 bytes (4%) of dynamic memory, leaving 314120 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 207426 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13560 bytes (4%) of dynamic memory, leaving 314120 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 208590 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 14056 bytes (4%) of dynamic memory, leaving 313624 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 223938 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 13584 bytes (4%) of dynamic memory, leaving 314096 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 201658 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13832 bytes (4%) of dynamic memory, leaving 313848 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/softrtc_ufox/softrtc_ufox.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/softrtc_ufox/softrtc_ufox.ino:89:5: error: 'TXLED0' was not declared in this scope
TXLED0; // apagar TXLED
^
Multiple libraries were found for "RTClib.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTClib
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BasicsLibrary
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTCLib_by_NeiroN
Result: PASS
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 209774 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13600 bytes (4%) of dynamic memory, leaving 314080 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
WARNING: library Ufox claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library LowPower_LowPowerLab claims to run on avr, samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ufox/examples/temperatura_humedad_deepsleep/temperatura_humedad_deepsleep.ino:25:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab/LowPower.h:166:5: error: #error "Processor architecture is not supported."
#error "Processor architecture is not supported."
^
Multiple libraries were found for "LowPower.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LowPower_LowPowerLab
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Low-Power
Multiple libraries were found for "DHT.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHT_sensor_library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uKit_Explore
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NanoPlayBoard
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_Temperature_And_Humidity_Sensor
Multiple libraries were found for "Adafruit_Sensor.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_Unified_Sensor
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArdUAV
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ClimaStick