VL53L0X - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

VL53L0X

Version: 1.3.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	Continuous	Single
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes ⚠️	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	PASS	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/Continuous

Result: PASS

Sketch uses 7520 bytes (23%) of program storage space. Maximum is 32256 bytes.
Global variables use 466 bytes (22%) of dynamic memory, leaving 1582 bytes for local variables. Maximum is 2048 bytes.

examples/Single

Result: PASS

Sketch uses 7584 bytes (23%) of program storage space. Maximum is 32256 bytes.
Global variables use 466 bytes (22%) of dynamic memory, leaving 1582 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp: In member function 'void VL53L0X::writeReg32Bit(uint8_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:309:34: error: call of overloaded 'write(long unsigned int)' is ambiguous
   bus->write((value >> 24) & 0xFF); // value highest byte
                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.h:5:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:6:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:59:20: note: candidate: virtual size_t arduino::MbedI2C::write(uint8_t)
     virtual size_t write(uint8_t data);
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:60:20: note: candidate: virtual size_t arduino::MbedI2C::write(int)
     virtual size_t write(int data) {
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:310:34: error: call of overloaded 'write(long unsigned int)' is ambiguous
   bus->write((value >> 16) & 0xFF);
                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.h:5:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:6:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:59:20: note: candidate: virtual size_t arduino::MbedI2C::write(uint8_t)
     virtual size_t write(uint8_t data);
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:60:20: note: candidate: virtual size_t arduino::MbedI2C::write(int)
     virtual size_t write(int data) {
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:311:34: error: call of overloaded 'write(long unsigned int)' is ambiguous
   bus->write((value >>  8) & 0xFF);
                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.h:5:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:6:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:59:20: note: candidate: virtual size_t arduino::MbedI2C::write(uint8_t)
     virtual size_t write(uint8_t data);
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:60:20: note: candidate: virtual size_t arduino::MbedI2C::write(int)
     virtual size_t write(int data) {
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:312:34: error: call of overloaded 'write(long unsigned int)' is ambiguous
   bus->write( value        & 0xFF); // value lowest byte
                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.h:5:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:6:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:59:20: note: candidate: virtual size_t arduino::MbedI2C::write(uint8_t)
     virtual size_t write(uint8_t data);
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:60:20: note: candidate: virtual size_t arduino::MbedI2C::write(int)
     virtual size_t write(int data) {
                    ^~~~~

examples/Continuous

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp: In member function 'void VL53L0X::writeReg32Bit(uint8_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:309:34: error: call of overloaded 'write(long unsigned int)' is ambiguous
   bus->write((value >> 24) & 0xFF); // value highest byte
                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.h:5:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:6:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:59:20: note: candidate: virtual size_t arduino::MbedI2C::write(uint8_t)
     virtual size_t write(uint8_t data);
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:60:20: note: candidate: virtual size_t arduino::MbedI2C::write(int)
     virtual size_t write(int data) {
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:310:34: error: call of overloaded 'write(long unsigned int)' is ambiguous
   bus->write((value >> 16) & 0xFF);
                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.h:5:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:6:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:59:20: note: candidate: virtual size_t arduino::MbedI2C::write(uint8_t)
     virtual size_t write(uint8_t data);
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:60:20: note: candidate: virtual size_t arduino::MbedI2C::write(int)
     virtual size_t write(int data) {
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:311:34: error: call of overloaded 'write(long unsigned int)' is ambiguous
   bus->write((value >>  8) & 0xFF);
                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.h:5:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:6:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:59:20: note: candidate: virtual size_t arduino::MbedI2C::write(uint8_t)
     virtual size_t write(uint8_t data);
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:60:20: note: candidate: virtual size_t arduino::MbedI2C::write(int)
     virtual size_t write(int data) {
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:312:34: error: call of overloaded 'write(long unsigned int)' is ambiguous
   bus->write( value        & 0xFF); // value lowest byte
                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.h:5:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:6:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:59:20: note: candidate: virtual size_t arduino::MbedI2C::write(uint8_t)
     virtual size_t write(uint8_t data);
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:60:20: note: candidate: virtual size_t arduino::MbedI2C::write(int)
     virtual size_t write(int data) {
                    ^~~~~

examples/Single

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp: In member function 'void VL53L0X::writeReg32Bit(uint8_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:309:34: error: call of overloaded 'write(long unsigned int)' is ambiguous
   bus->write((value >> 24) & 0xFF); // value highest byte
                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.h:5:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:6:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:59:20: note: candidate: virtual size_t arduino::MbedI2C::write(uint8_t)
     virtual size_t write(uint8_t data);
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:60:20: note: candidate: virtual size_t arduino::MbedI2C::write(int)
     virtual size_t write(int data) {
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:310:34: error: call of overloaded 'write(long unsigned int)' is ambiguous
   bus->write((value >> 16) & 0xFF);
                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.h:5:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:6:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:59:20: note: candidate: virtual size_t arduino::MbedI2C::write(uint8_t)
     virtual size_t write(uint8_t data);
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:60:20: note: candidate: virtual size_t arduino::MbedI2C::write(int)
     virtual size_t write(int data) {
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:311:34: error: call of overloaded 'write(long unsigned int)' is ambiguous
   bus->write((value >>  8) & 0xFF);
                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.h:5:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:6:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:59:20: note: candidate: virtual size_t arduino::MbedI2C::write(uint8_t)
     virtual size_t write(uint8_t data);
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:60:20: note: candidate: virtual size_t arduino::MbedI2C::write(int)
     virtual size_t write(int data) {
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:312:34: error: call of overloaded 'write(long unsigned int)' is ambiguous
   bus->write( value        & 0xFF); // value lowest byte
                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.h:5:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:6:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:59:20: note: candidate: virtual size_t arduino::MbedI2C::write(uint8_t)
     virtual size_t write(uint8_t data);
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:60:20: note: candidate: virtual size_t arduino::MbedI2C::write(int)
     virtual size_t write(int data) {
                    ^~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.h:5:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:6:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t VL53L0X::readReg(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint16_t VL53L0X::readReg16Bit(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint32_t VL53L0X::readReg32Bit(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void VL53L0X::readMulti(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/Continuous

Result: PASS

Sketch uses 8332 bytes (16%) of program storage space. Maximum is 49152 bytes.
Global variables use 498 bytes (8%) of dynamic memory, leaving 5646 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.h:5:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:6:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t VL53L0X::readReg(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint16_t VL53L0X::readReg16Bit(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint32_t VL53L0X::readReg32Bit(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void VL53L0X::readMulti(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/Single

Result: PASS

Sketch uses 8396 bytes (17%) of program storage space. Maximum is 49152 bytes.
Global variables use 498 bytes (8%) of dynamic memory, leaving 5646 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.h:5:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VL53L0X/VL53L0X.cpp:6:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t VL53L0X::readReg(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint16_t VL53L0X::readReg16Bit(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint32_t VL53L0X::readReg32Bit(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void VL53L0X::readMulti(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.

examples/Continuous

Result: PASS

Sketch uses 20236 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 3592 bytes (10%) of dynamic memory, leaving 29176 bytes for local variables. Maximum is 32768 bytes.

examples/Single

Result: PASS

Sketch uses 20160 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 3592 bytes (10%) of dynamic memory, leaving 29176 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 202994 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.

examples/Continuous

Result: PASS

Sketch uses 216906 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14160 bytes (4%) of dynamic memory, leaving 313520 bytes for local variables. Maximum is 327680 bytes.

examples/Single

Result: PASS

Sketch uses 216838 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14160 bytes (4%) of dynamic memory, leaving 313520 bytes for local variables. Maximum is 327680 bytes.