This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.0
More details
| Board | Claims compatibility | Inclusion | Plot-Interrupt |
Plot-Poll |
Print-Interrupt |
Print-Poll |
|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | PASS | PASS | PASS | PASS |
Result: PASS
Sketch uses 1820 bytes (5%) of program storage space. Maximum is 32256 bytes. Global variables use 126 bytes (6%) of dynamic memory, leaving 1922 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Plot-Interrupt/Plot-Interrupt.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Plot-Interrupt/Plot-Interrupt.ino:60:11: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%d\n", bioVal);
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Plot-Poll/Plot-Poll.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Plot-Poll/Plot-Poll.ino:55:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%d\n", bioVal);
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:57:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got DevID %d, RevID %d\n", regVal1, regVal2);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:67:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Self timed measures %s\n", ((regVal1 & SELF_TIMED_EN) == SELF_TIMED_EN ? "enabled" : "disabled"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:68:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Continuous bio measurement %s\n", ((regVal1 & PER_BIO_MEAS_EN) == PER_BIO_MEAS_EN ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:69:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Continuous als measurement %s\n", ((regVal1 & PER_ALS_MEAS_EN) == PER_ALS_MEAS_EN ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:70:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Single bio measurement %s\n", ((regVal1 & START_BIO_MES) == START_BIO_MES ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:71:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Single als measurement %s\n", ((regVal1 & START_ALS_MES) == START_ALS_MES ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:87:11: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Bio sensor data rate is %s measures/s\n", sensRates[regVal1].c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:98:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("LED current is %d mA\n", regVal1 * 10);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:110:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("ALS data rate %d samples/s\n", alsRates[regVal2]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:111:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Auto offset compensation is %s\n", ((regVal1 & AUTO_COMP_ENA) == AUTO_COMP_ENA ? "enabled" : "disabled"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:113:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Averaging count is %d\n", pow(2, regVal2));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:127:3: error: 'time_t' was not declared in this scope
time_t startTimeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:127:3: note: suggested alternative: 'size_t'
time_t startTimeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:130:22: error: 'startTimeout' was not declared in this scope
while ((millis() - startTimeout) < 5000) // Stop polling after 5 seconds
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:130:22: note: suggested alternative: 'waitTimeOut'
while ((millis() - startTimeout) < 5000) // Stop polling after 5 seconds
^~~~~~~~~~~~
waitTimeOut
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:162:12: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got Bio value %d\n", regValL1);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:170:12: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got ALS value %d\n", regValL2);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:204:11: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Bio value %d Heartrate %d\n", bioVal, beatsPerMinute);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:208:11: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("ALS value %d\n", ppg1.getAlsValue());
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:55:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got DevID %d, RevID %d\n", regVal1, regVal2);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:65:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Self timed measures %s\n", ((regVal1 & SELF_TIMED_EN) == SELF_TIMED_EN ? "enabled" : "disabled"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:66:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Continuous bio measurement %s\n", ((regVal1 & PER_BIO_MEAS_EN) == PER_BIO_MEAS_EN ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:67:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Continuous als measurement %s\n", ((regVal1 & PER_ALS_MEAS_EN) == PER_ALS_MEAS_EN ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:68:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Single bio measurement %s\n", ((regVal1 & START_BIO_MES) == START_BIO_MES ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:69:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Single als measurement %s\n", ((regVal1 & START_ALS_MES) == START_ALS_MES ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:85:11: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Bio sensor data rate is %s measures/s\n", sensRates[regVal1].c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:96:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("LED current is %d mA\n", regVal1 * 10);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:108:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("ALS data rate %d samples/s\n", alsRates[regVal2]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:109:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Auto offset compensation is %s\n", ((regVal1 & AUTO_COMP_ENA) == AUTO_COMP_ENA ? "enabled" : "disabled"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:111:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Averaging count is %d\n", pow(2, regVal2));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:125:3: error: 'time_t' was not declared in this scope
time_t startTimeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:125:3: note: suggested alternative: 'size_t'
time_t startTimeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:128:22: error: 'startTimeout' was not declared in this scope
while ((millis() - startTimeout) < 5000) // Stop polling after 5 seconds
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:128:22: note: suggested alternative: 'waitTimeOut'
while ((millis() - startTimeout) < 5000) // Stop polling after 5 seconds
^~~~~~~~~~~~
waitTimeOut
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:160:12: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got Bio value %d\n", regValL1);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:168:12: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got ALS value %d\n", regValL2);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:197:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Bio value %d Heartrate %d\n", bioVal, beatsPerMinute);
^~~~~~
print
Result: PASS
Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Plot-Interrupt/Plot-Interrupt.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Plot-Interrupt/Plot-Interrupt.ino:60:11: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%d\n", bioVal);
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Plot-Poll/Plot-Poll.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Plot-Poll/Plot-Poll.ino:55:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%d\n", bioVal);
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:57:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got DevID %d, RevID %d\n", regVal1, regVal2);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:67:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Self timed measures %s\n", ((regVal1 & SELF_TIMED_EN) == SELF_TIMED_EN ? "enabled" : "disabled"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:68:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Continuous bio measurement %s\n", ((regVal1 & PER_BIO_MEAS_EN) == PER_BIO_MEAS_EN ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:69:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Continuous als measurement %s\n", ((regVal1 & PER_ALS_MEAS_EN) == PER_ALS_MEAS_EN ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:70:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Single bio measurement %s\n", ((regVal1 & START_BIO_MES) == START_BIO_MES ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:71:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Single als measurement %s\n", ((regVal1 & START_ALS_MES) == START_ALS_MES ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:87:11: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Bio sensor data rate is %s measures/s\n", sensRates[regVal1].c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:98:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("LED current is %d mA\n", regVal1 * 10);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:110:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("ALS data rate %d samples/s\n", alsRates[regVal2]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:111:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Auto offset compensation is %s\n", ((regVal1 & AUTO_COMP_ENA) == AUTO_COMP_ENA ? "enabled" : "disabled"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:113:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Averaging count is %d\n", pow(2, regVal2));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:162:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got Bio value %d\n", regValL1);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:170:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got ALS value %d\n", regValL2);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:204:11: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Bio value %d Heartrate %d\n", bioVal, beatsPerMinute);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:208:11: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("ALS value %d\n", ppg1.getAlsValue());
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:55:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got DevID %d, RevID %d\n", regVal1, regVal2);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:65:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Self timed measures %s\n", ((regVal1 & SELF_TIMED_EN) == SELF_TIMED_EN ? "enabled" : "disabled"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:66:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Continuous bio measurement %s\n", ((regVal1 & PER_BIO_MEAS_EN) == PER_BIO_MEAS_EN ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:67:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Continuous als measurement %s\n", ((regVal1 & PER_ALS_MEAS_EN) == PER_ALS_MEAS_EN ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:68:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Single bio measurement %s\n", ((regVal1 & START_BIO_MES) == START_BIO_MES ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:69:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Single als measurement %s\n", ((regVal1 & START_ALS_MES) == START_ALS_MES ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:85:11: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Bio sensor data rate is %s measures/s\n", sensRates[regVal1].c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:96:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("LED current is %d mA\n", regVal1 * 10);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:108:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("ALS data rate %d samples/s\n", alsRates[regVal2]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:109:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Auto offset compensation is %s\n", ((regVal1 & AUTO_COMP_ENA) == AUTO_COMP_ENA ? "enabled" : "disabled"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:111:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Averaging count is %d\n", pow(2, regVal2));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:160:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got Bio value %d\n", regValL1);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:168:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got ALS value %d\n", regValL2);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:197:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Bio value %d Heartrate %d\n", bioVal, beatsPerMinute);
^~~~~~
print
Result: PASS
Sketch uses 3656 bytes (7%) of program storage space. Maximum is 49152 bytes. Global variables use 413 bytes (6%) of dynamic memory, leaving 5731 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Plot-Interrupt/Plot-Interrupt.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Plot-Interrupt/Plot-Interrupt.ino:60:11: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%d\n", bioVal);
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Plot-Poll/Plot-Poll.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Plot-Poll/Plot-Poll.ino:55:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%d\n", bioVal);
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:57:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got DevID %d, RevID %d\n", regVal1, regVal2);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:67:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Self timed measures %s\n", ((regVal1 & SELF_TIMED_EN) == SELF_TIMED_EN ? "enabled" : "disabled"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:68:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Continuous bio measurement %s\n", ((regVal1 & PER_BIO_MEAS_EN) == PER_BIO_MEAS_EN ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:69:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Continuous als measurement %s\n", ((regVal1 & PER_ALS_MEAS_EN) == PER_ALS_MEAS_EN ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:70:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Single bio measurement %s\n", ((regVal1 & START_BIO_MES) == START_BIO_MES ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:71:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Single als measurement %s\n", ((regVal1 & START_ALS_MES) == START_ALS_MES ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:87:11: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Bio sensor data rate is %s measures/s\n", sensRates[regVal1].c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:98:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("LED current is %d mA\n", regVal1 * 10);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:110:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("ALS data rate %d samples/s\n", alsRates[regVal2]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:111:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Auto offset compensation is %s\n", ((regVal1 & AUTO_COMP_ENA) == AUTO_COMP_ENA ? "enabled" : "disabled"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:113:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Averaging count is %d\n", pow(2, regVal2));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:127:3: error: 'time_t' was not declared in this scope
time_t startTimeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:127:3: note: suggested alternative: 'size_t'
time_t startTimeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:130:22: error: 'startTimeout' was not declared in this scope
while ((millis() - startTimeout) < 5000) // Stop polling after 5 seconds
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:130:22: note: suggested alternative: 'waitTimeOut'
while ((millis() - startTimeout) < 5000) // Stop polling after 5 seconds
^~~~~~~~~~~~
waitTimeOut
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:162:12: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got Bio value %d\n", regValL1);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:170:12: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got ALS value %d\n", regValL2);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:204:11: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Bio value %d Heartrate %d\n", bioVal, beatsPerMinute);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:208:11: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("ALS value %d\n", ppg1.getAlsValue());
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:55:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got DevID %d, RevID %d\n", regVal1, regVal2);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:65:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Self timed measures %s\n", ((regVal1 & SELF_TIMED_EN) == SELF_TIMED_EN ? "enabled" : "disabled"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:66:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Continuous bio measurement %s\n", ((regVal1 & PER_BIO_MEAS_EN) == PER_BIO_MEAS_EN ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:67:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Continuous als measurement %s\n", ((regVal1 & PER_ALS_MEAS_EN) == PER_ALS_MEAS_EN ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:68:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Single bio measurement %s\n", ((regVal1 & START_BIO_MES) == START_BIO_MES ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:69:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Single als measurement %s\n", ((regVal1 & START_ALS_MES) == START_ALS_MES ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:85:11: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Bio sensor data rate is %s measures/s\n", sensRates[regVal1].c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:96:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("LED current is %d mA\n", regVal1 * 10);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:108:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("ALS data rate %d samples/s\n", alsRates[regVal2]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:109:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Auto offset compensation is %s\n", ((regVal1 & AUTO_COMP_ENA) == AUTO_COMP_ENA ? "enabled" : "disabled"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:111:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Averaging count is %d\n", pow(2, regVal2));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:125:3: error: 'time_t' was not declared in this scope
time_t startTimeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:125:3: note: suggested alternative: 'size_t'
time_t startTimeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:128:22: error: 'startTimeout' was not declared in this scope
while ((millis() - startTimeout) < 5000) // Stop polling after 5 seconds
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:128:22: note: suggested alternative: 'waitTimeOut'
while ((millis() - startTimeout) < 5000) // Stop polling after 5 seconds
^~~~~~~~~~~~
waitTimeOut
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:160:12: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got Bio value %d\n", regValL1);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:168:12: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got ALS value %d\n", regValL2);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:197:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Bio value %d Heartrate %d\n", bioVal, beatsPerMinute);
^~~~~~
print
Result: PASS
Sketch uses 13648 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3708 bytes (11%) of dynamic memory, leaving 29060 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Plot-Interrupt/Plot-Interrupt.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Plot-Interrupt/Plot-Interrupt.ino:60:11: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%d\n", bioVal);
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Plot-Poll/Plot-Poll.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Plot-Poll/Plot-Poll.ino:55:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%d\n", bioVal);
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:57:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got DevID %d, RevID %d\n", regVal1, regVal2);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:67:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Self timed measures %s\n", ((regVal1 & SELF_TIMED_EN) == SELF_TIMED_EN ? "enabled" : "disabled"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:68:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Continuous bio measurement %s\n", ((regVal1 & PER_BIO_MEAS_EN) == PER_BIO_MEAS_EN ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:69:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Continuous als measurement %s\n", ((regVal1 & PER_ALS_MEAS_EN) == PER_ALS_MEAS_EN ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:70:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Single bio measurement %s\n", ((regVal1 & START_BIO_MES) == START_BIO_MES ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:71:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Single als measurement %s\n", ((regVal1 & START_ALS_MES) == START_ALS_MES ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:87:11: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Bio sensor data rate is %s measures/s\n", sensRates[regVal1].c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:98:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("LED current is %d mA\n", regVal1 * 10);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:110:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("ALS data rate %d samples/s\n", alsRates[regVal2]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:111:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Auto offset compensation is %s\n", ((regVal1 & AUTO_COMP_ENA) == AUTO_COMP_ENA ? "enabled" : "disabled"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:113:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Averaging count is %d\n", pow(2, regVal2));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:162:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got Bio value %d\n", regValL1);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:170:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got ALS value %d\n", regValL2);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:204:11: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Bio value %d Heartrate %d\n", bioVal, beatsPerMinute);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Interrupt/Print-Interrupt.ino:208:11: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("ALS value %d\n", ppg1.getAlsValue());
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:55:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got DevID %d, RevID %d\n", regVal1, regVal2);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:65:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Self timed measures %s\n", ((regVal1 & SELF_TIMED_EN) == SELF_TIMED_EN ? "enabled" : "disabled"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:66:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Continuous bio measurement %s\n", ((regVal1 & PER_BIO_MEAS_EN) == PER_BIO_MEAS_EN ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:67:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Continuous als measurement %s\n", ((regVal1 & PER_ALS_MEAS_EN) == PER_ALS_MEAS_EN ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:68:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Single bio measurement %s\n", ((regVal1 & START_BIO_MES) == START_BIO_MES ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:69:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Single als measurement %s\n", ((regVal1 & START_ALS_MES) == START_ALS_MES ? "active" : "inactive"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:85:11: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Bio sensor data rate is %s measures/s\n", sensRates[regVal1].c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:96:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("LED current is %d mA\n", regVal1 * 10);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:108:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("ALS data rate %d samples/s\n", alsRates[regVal2]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:109:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Auto offset compensation is %s\n", ((regVal1 & AUTO_COMP_ENA) == AUTO_COMP_ENA ? "enabled" : "disabled"));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:111:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Averaging count is %d\n", pow(2, regVal2));
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:160:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got Bio value %d\n", regValL1);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:168:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Got ALS value %d\n", regValL2);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VNCL4020C-Arduino/examples/Print-Poll/Print-Poll.ino:197:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Bio value %d Heartrate %d\n", bioVal, beatsPerMinute);
^~~~~~
print
Result: PASS
Sketch uses 203186 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13888 bytes (4%) of dynamic memory, leaving 313792 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 215926 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14680 bytes (4%) of dynamic memory, leaving 313000 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 215794 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14768 bytes (4%) of dynamic memory, leaving 312912 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 224138 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 14800 bytes (4%) of dynamic memory, leaving 312880 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 223834 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 14800 bytes (4%) of dynamic memory, leaving 312880 bytes for local variables. Maximum is 327680 bytes.