This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.2
More details
| Board | Claims compatibility | Inclusion | ArduinoUNO_ESP01_ex3_access_point |
Bluetooth_ex2_UNO_virtual_pins |
Ethernet_ex1_getting_started |
Wemos_NodeMCU_ESP8266_ex4_read_write_IOs |
Wemos_NodeMCU_ESP8266_ex3_overview |
ArduinoMEGA_ESP01_ex1_getting_started |
ArduinoUNO_ESP01_ex1_getting_started |
Bluetooth_ex1_UNO_getting_started |
ESP32_ex1_getting_started |
Ethernet_ex2_virtual_pins |
Ethernet_ex3_send_receive_text |
Wemos_NodeMCU_ESP8266_ex2_virtual_pins |
Wemos_NodeMCU_ESP8266_ex5_access_point |
ArduinoUNO_ESP01_ex2_virtual_pins |
Bluetooth_ex3_MEGA |
Enc28j60_read_write_IOs |
Wemos_NodeMCU_ESP8266_ex1_getting_started |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | FAIL | PASS | PASS | FAIL | FAIL | FAIL | PASS | PASS | FAIL | PASS | PASS | FAIL | FAIL | PASS | FAIL | PASS | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | FAIL | FAIL | PASS | FAIL | FAIL | PASS | FAIL | FAIL | FAIL | PASS | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | FAIL | PASS | PASS | FAIL | FAIL | PASS | PASS | PASS | FAIL | PASS | PASS | FAIL | FAIL | PASS | PASS | PASS | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | FAIL | FAIL | PASS | FAIL | FAIL | PASS | FAIL | FAIL | FAIL | PASS | PASS | FAIL | FAIL | FAIL | PASS | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | PASS | FAIL | FAIL | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | PASS | PASS | FAIL |
Result: PASS
Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ArduinoMEGA_ESP01_ex1_getting_started/ArduinoMEGA_ESP01_ex1_getting_started.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ArduinoMEGA_ESP01_ex1_getting_started/ArduinoMEGA_ESP01_ex1_getting_started.ino:31:3: error: 'Serial1' was not declared in this scope
Serial1.begin(9600); // or 115200
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ArduinoMEGA_ESP01_ex1_getting_started/ArduinoMEGA_ESP01_ex1_getting_started.ino:31:3: note: suggested alternative: 'Serial'
Serial1.begin(9600); // or 115200
^~~~~~~
Serial
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ArduinoMEGA_ESP01_ex1_getting_started/ArduinoMEGA_ESP01_ex1_getting_started.ino: In function 'void connectToWiFiNetwork()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ArduinoMEGA_ESP01_ex1_getting_started/ArduinoMEGA_ESP01_ex1_getting_started.ino:64:12: error: 'Serial1' was not declared in this scope
while (Serial1.available()) Serial1.read();
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ArduinoMEGA_ESP01_ex1_getting_started/ArduinoMEGA_ESP01_ex1_getting_started.ino:64:12: note: suggested alternative: 'Serial'
while (Serial1.available()) Serial1.read();
^~~~~~~
Serial
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ArduinoMEGA_ESP01_ex1_getting_started/ArduinoMEGA_ESP01_ex1_getting_started.ino:65:5: error: 'Serial1' was not declared in this scope
Serial1.println("AT+GMR"); // print firmware info
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ArduinoMEGA_ESP01_ex1_getting_started/ArduinoMEGA_ESP01_ex1_getting_started.ino:65:5: note: suggested alternative: 'Serial'
Serial1.println("AT+GMR"); // print firmware info
^~~~~~~
Serial
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ArduinoMEGA_ESP01_ex1_getting_started/ArduinoMEGA_ESP01_ex1_getting_started.ino: In function 'void virtuinoRun()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ArduinoMEGA_ESP01_ex1_getting_started/ArduinoMEGA_ESP01_ex1_getting_started.ino:115:6: error: 'Serial1' was not declared in this scope
if(Serial1.available()){
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ArduinoMEGA_ESP01_ex1_getting_started/ArduinoMEGA_ESP01_ex1_getting_started.ino:115:6: note: suggested alternative: 'Serial'
if(Serial1.available()){
^~~~~~~
Serial
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ArduinoMEGA_ESP01_ex1_getting_started/ArduinoMEGA_ESP01_ex1_getting_started.ino: In function 'boolean waitForResponse(String, int)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ArduinoMEGA_ESP01_ex1_getting_started/ArduinoMEGA_ESP01_ex1_getting_started.ino:151:15: error: 'Serial1' was not declared in this scope
while(Serial1.available() > 0) {
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ArduinoMEGA_ESP01_ex1_getting_started/ArduinoMEGA_ESP01_ex1_getting_started.ino:151:15: note: suggested alternative: 'Serial'
while(Serial1.available() > 0) {
^~~~~~~
Serial
Result: PASS
Sketch uses 13378 bytes (41%) of program storage space. Maximum is 32256 bytes. Global variables use 708 bytes (34%) of dynamic memory, leaving 1340 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 14080 bytes (43%) of program storage space. Maximum is 32256 bytes. Global variables use 720 bytes (35%) of dynamic memory, leaving 1328 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
Result: PASS
Sketch uses 11658 bytes (36%) of program storage space. Maximum is 32256 bytes. Global variables use 538 bytes (26%) of dynamic memory, leaving 1510 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 12536 bytes (38%) of program storage space. Maximum is 32256 bytes. Global variables use 550 bytes (26%) of dynamic memory, leaving 1498 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex3_MEGA/Bluetooth_ex3_MEGA.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex3_MEGA/Bluetooth_ex3_MEGA.ino:21:3: error: 'Serial1' was not declared in this scope
Serial1.begin(9600);
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex3_MEGA/Bluetooth_ex3_MEGA.ino:21:3: note: suggested alternative: 'Serial'
Serial1.begin(9600);
^~~~~~~
Serial
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex3_MEGA/Bluetooth_ex3_MEGA.ino: In function 'void virtuinoRun()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex3_MEGA/Bluetooth_ex3_MEGA.ino:78:12: error: 'Serial1' was not declared in this scope
while (Serial1.available()) {
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex3_MEGA/Bluetooth_ex3_MEGA.ino:78:12: note: suggested alternative: 'Serial'
while (Serial1.available()) {
^~~~~~~
Serial
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ESP32_ex1_getting_started/ESP32_ex1_getting_started.ino: In function 'void connectToWiFiNetwork()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ESP32_ex1_getting_started/ESP32_ex1_getting_started.ino:70:8: error: 'class WiFiClass' has no member named 'mode'
WiFi.mode(WIFI_STA); // Config module as station only.
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ESP32_ex1_getting_started/ESP32_ex1_getting_started.ino:70:13: error: 'WIFI_STA' was not declared in this scope
WiFi.mode(WIFI_STA); // Config module as station only.
^~~~~~~~
Multiple libraries were found for "WiFi.h"
Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/WiFi
Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT
Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/WiFiNINA
Result: PASS
Sketch uses 25834 bytes (80%) of program storage space. Maximum is 32256 bytes. Global variables use 1454 bytes (70%) of dynamic memory, leaving 594 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 19978 bytes (61%) of program storage space. Maximum is 32256 bytes. Global variables use 674 bytes (32%) of dynamic memory, leaving 1374 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 20730 bytes (64%) of program storage space. Maximum is 32256 bytes. Global variables use 684 bytes (33%) of dynamic memory, leaving 1364 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 20858 bytes (64%) of program storage space. Maximum is 32256 bytes. Global variables use 732 bytes (35%) of dynamic memory, leaving 1316 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex1_getting_started/Wemos_NodeMCU_ESP8266_ex1_getting_started.ino:6:10: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex2_virtual_pins/Wemos_NodeMCU_ESP8266_ex2_virtual_pins.ino:6:10: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex3_overview/Wemos_NodeMCU_ESP8266_ex3_overview.ino:6:10: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex4_read_write_IOs/Wemos_NodeMCU_ESP8266_ex4_read_write_IOs.ino:6:10: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex5_access_point/Wemos_NodeMCU_ESP8266_ex5_access_point.ino:6:10: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: PASS
Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 96834 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43720 bytes (16%) of dynamic memory, leaving 226616 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
#include <util/delay_basic.h>
^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
#include <util/delay_basic.h>
^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Result: FAIL
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
#include <util/delay_basic.h>
^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
#include <util/delay_basic.h>
^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex3_MEGA/Bluetooth_ex3_MEGA.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex3_MEGA/Bluetooth_ex3_MEGA.ino: In function 'void virtuinoRun()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/VirtuinoCM.h:13:23: error: ambiguous overload for 'operator=' (operand types are 'arduino::String' and 'char')
#define CM_START_CHAR '!' // All Virtuino commands starts with !
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex3_MEGA/Bluetooth_ex3_MEGA.ino:81:35: note: in expansion of macro 'CM_START_CHAR'
virtuino.readBuffer=CM_START_CHAR; // copy the new command to the virtuino readBuffer
^~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/IPAddress.h:24:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/ArduinoAPI.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:27,
from /tmp/arduino-sketch-242A6824EB1B8288E66BBD68FA717A54/sketch/Bluetooth_ex3_MEGA.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:98:11: note: candidate: arduino::String& arduino::String::operator=(const arduino::String&) <near match>
String & operator = (const String &rhs);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:98:11: note: conversion of argument 1 would be ill-formed:
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex3_MEGA/Bluetooth_ex3_MEGA.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/VirtuinoCM.h:13:23: error: conversion from 'char' to 'const arduino::String' is ambiguous
#define CM_START_CHAR '!' // All Virtuino commands starts with !
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex3_MEGA/Bluetooth_ex3_MEGA.ino:81:35: note: in expansion of macro 'CM_START_CHAR'
virtuino.readBuffer=CM_START_CHAR; // copy the new command to the virtuino readBuffer
^~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/IPAddress.h:24:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/ArduinoAPI.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:27,
from /tmp/arduino-sketch-242A6824EB1B8288E66BBD68FA717A54/sketch/Bluetooth_ex3_MEGA.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:74:2: note: candidate: arduino::String::String(const arduino::__FlashStringHelper*) <near match>
String(const __FlashStringHelper *str);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:74:2: note: conversion of argument 1 would be ill-formed:
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex3_MEGA/Bluetooth_ex3_MEGA.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/VirtuinoCM.h:13:23: error: invalid conversion from 'char' to 'const arduino::__FlashStringHelper*' [-fpermissive]
#define CM_START_CHAR '!' // All Virtuino commands starts with !
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex3_MEGA/Bluetooth_ex3_MEGA.ino:81:35: note: in expansion of macro 'CM_START_CHAR'
virtuino.readBuffer=CM_START_CHAR; // copy the new command to the virtuino readBuffer
^~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/IPAddress.h:24:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/ArduinoAPI.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:27,
from /tmp/arduino-sketch-242A6824EB1B8288E66BBD68FA717A54/sketch/Bluetooth_ex3_MEGA.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:70:2: note: candidate: arduino::String::String(const char*) <near match>
String(const char *cstr = "");
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:70:2: note: conversion of argument 1 would be ill-formed:
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex3_MEGA/Bluetooth_ex3_MEGA.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/VirtuinoCM.h:13:23: error: invalid conversion from 'char' to 'const char*' [-fpermissive]
#define CM_START_CHAR '!' // All Virtuino commands starts with !
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex3_MEGA/Bluetooth_ex3_MEGA.ino:81:35: note: in expansion of macro 'CM_START_CHAR'
virtuino.readBuffer=CM_START_CHAR; // copy the new command to the virtuino readBuffer
^~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/IPAddress.h:24:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/ArduinoAPI.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:27,
from /tmp/arduino-sketch-242A6824EB1B8288E66BBD68FA717A54/sketch/Bluetooth_ex3_MEGA.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:99:11: note: candidate: arduino::String& arduino::String::operator=(const char*) <near match>
String & operator = (const char *cstr);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:99:11: note: conversion of argument 1 would be ill-formed:
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex3_MEGA/Bluetooth_ex3_MEGA.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/VirtuinoCM.h:13:23: error: invalid conversion from 'char' to 'const char*' [-fpermissive]
#define CM_START_CHAR '!' // All Virtuino commands starts with !
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex3_MEGA/Bluetooth_ex3_MEGA.ino:81:35: note: in expansion of macro 'CM_START_CHAR'
virtuino.readBuffer=CM_START_CHAR; // copy the new command to the virtuino readBuffer
^~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/IPAddress.h:24:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/ArduinoAPI.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:27,
from /tmp/arduino-sketch-242A6824EB1B8288E66BBD68FA717A54/sketch/Bluetooth_ex3_MEGA.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:100:11: note: candidate: arduino::String& arduino::String::operator=(const arduino::__FlashStringHelper*) <near match>
String & operator = (const __FlashStringHelper *str);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:100:11: note: conversion of argument 1 would be ill-formed:
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex3_MEGA/Bluetooth_ex3_MEGA.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/VirtuinoCM.h:13:23: error: invalid conversion from 'char' to 'const arduino::__FlashStringHelper*' [-fpermissive]
#define CM_START_CHAR '!' // All Virtuino commands starts with !
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex3_MEGA/Bluetooth_ex3_MEGA.ino:81:35: note: in expansion of macro 'CM_START_CHAR'
virtuino.readBuffer=CM_START_CHAR; // copy the new command to the virtuino readBuffer
^~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/IPAddress.h:24:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/ArduinoAPI.h:30,
from /home/ec2-user/arduino-testl
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ESP32_ex1_getting_started/ESP32_ex1_getting_started.ino: In function 'void connectToWiFiNetwork()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ESP32_ex1_getting_started/ESP32_ex1_getting_started.ino:70:8: error: 'class WiFiClass' has no member named 'mode'
WiFi.mode(WIFI_STA); // Config module as station only.
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ESP32_ex1_getting_started/ESP32_ex1_getting_started.ino:70:13: error: 'WIFI_STA' was not declared in this scope
WiFi.mode(WIFI_STA); // Config module as station only.
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ESP32_ex1_getting_started/ESP32_ex1_getting_started.ino:70:13: note: suggested alternative: 'I2C_SDA'
WiFi.mode(WIFI_STA); // Config module as station only.
^~~~~~~~
I2C_SDA
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ESP32_ex1_getting_started/ESP32_ex1_getting_started.ino:71:28: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
WiFi.begin(ssid, password);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ESP32_ex1_getting_started/ESP32_ex1_getting_started.ino:6:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi/src/WiFi.h:79:9: note: initializing argument 1 of 'int WiFiClass::begin(char*, const char*)'
int begin(char* ssid, const char *passphrase);
^~~~~
Multiple libraries were found for "WiFi.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet/UIPEthernet.h:35:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Enc28j60_read_write_IOs/Enc28j60_read_write_IOs.ino:7:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet/utility/Enc28J60Network.h:147:5: error: #error "Not defined SPI_MOSI!"
#error "Not defined SPI_MOSI!"
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet/utility/Enc28J60Network.h:176:5: error: #error "Not defined SPI_MISO!"
#error "Not defined SPI_MISO!"
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet/utility/Enc28J60Network.h:204:5: error: #error "Not defined SPI_SCK!"
#error "Not defined SPI_SCK!"
^~~~~
Result: PASS
Sketch uses 103508 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44008 bytes (16%) of dynamic memory, leaving 226328 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 103702 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44012 bytes (16%) of dynamic memory, leaving 226324 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 103854 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44032 bytes (16%) of dynamic memory, leaving 226304 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex1_getting_started/Wemos_NodeMCU_ESP8266_ex1_getting_started.ino:6:10: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex2_virtual_pins/Wemos_NodeMCU_ESP8266_ex2_virtual_pins.ino:6:10: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex3_overview/Wemos_NodeMCU_ESP8266_ex3_overview.ino:6:10: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex4_read_write_IOs/Wemos_NodeMCU_ESP8266_ex4_read_write_IOs.ino:6:10: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex5_access_point/Wemos_NodeMCU_ESP8266_ex5_access_point.ino:6:10: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: PASS
Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes. Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 13269 bytes (26%) of program storage space. Maximum is 49152 bytes. Global variables use 499 bytes (8%) of dynamic memory, leaving 5645 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 14745 bytes (29%) of program storage space. Maximum is 49152 bytes. Global variables use 635 bytes (10%) of dynamic memory, leaving 5509 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 15395 bytes (31%) of program storage space. Maximum is 49152 bytes. Global variables use 643 bytes (10%) of dynamic memory, leaving 5501 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
Result: PASS
Sketch uses 13116 bytes (26%) of program storage space. Maximum is 49152 bytes. Global variables use 635 bytes (10%) of dynamic memory, leaving 5509 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 13870 bytes (28%) of program storage space. Maximum is 49152 bytes. Global variables use 645 bytes (10%) of dynamic memory, leaving 5499 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 11668 bytes (23%) of program storage space. Maximum is 49152 bytes. Global variables use 499 bytes (8%) of dynamic memory, leaving 5645 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ESP32_ex1_getting_started/ESP32_ex1_getting_started.ino: In function 'void connectToWiFiNetwork()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ESP32_ex1_getting_started/ESP32_ex1_getting_started.ino:70:8: error: 'class WiFiClass' has no member named 'mode'
WiFi.mode(WIFI_STA); // Config module as station only.
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ESP32_ex1_getting_started/ESP32_ex1_getting_started.ino:70:13: error: 'WIFI_STA' was not declared in this scope
WiFi.mode(WIFI_STA); // Config module as station only.
^~~~~~~~
Multiple libraries were found for "WiFi.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA
Result: PASS
Sketch uses 28347 bytes (57%) of program storage space. Maximum is 49152 bytes. Global variables use 1300 bytes (21%) of dynamic memory, leaving 4844 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 23991 bytes (48%) of program storage space. Maximum is 49152 bytes. Global variables use 528 bytes (8%) of dynamic memory, leaving 5616 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 24679 bytes (50%) of program storage space. Maximum is 49152 bytes. Global variables use 536 bytes (8%) of dynamic memory, leaving 5608 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 24816 bytes (50%) of program storage space. Maximum is 49152 bytes. Global variables use 544 bytes (8%) of dynamic memory, leaving 5600 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex1_getting_started/Wemos_NodeMCU_ESP8266_ex1_getting_started.ino:6:10: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex2_virtual_pins/Wemos_NodeMCU_ESP8266_ex2_virtual_pins.ino:6:10: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex3_overview/Wemos_NodeMCU_ESP8266_ex3_overview.ino:6:10: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex4_read_write_IOs/Wemos_NodeMCU_ESP8266_ex4_read_write_IOs.ino:6:10: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex5_access_point/Wemos_NodeMCU_ESP8266_ex5_access_point.ino:6:10: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: PASS
Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 40756 bytes (15%) of program storage space. Maximum is 262144 bytes. Global variables use 3604 bytes (10%) of dynamic memory, leaving 29164 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
#include <util/delay_basic.h>
^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble
Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
#include <util/delay_basic.h>
^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble
Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Result: FAIL
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
#include <util/delay_basic.h>
^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble
Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
#include <util/delay_basic.h>
^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble
Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Result: PASS
Sketch uses 39260 bytes (14%) of program storage space. Maximum is 262144 bytes. Global variables use 3588 bytes (10%) of dynamic memory, leaving 29180 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ESP32_ex1_getting_started/ESP32_ex1_getting_started.ino: In function 'void connectToWiFiNetwork()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ESP32_ex1_getting_started/ESP32_ex1_getting_started.ino:70:8: error: 'class WiFiClass' has no member named 'mode'
WiFi.mode(WIFI_STA); // Config module as station only.
^~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ESP32_ex1_getting_started/ESP32_ex1_getting_started.ino:70:13: error: 'WIFI_STA' was not declared in this scope
WiFi.mode(WIFI_STA); // Config module as station only.
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ESP32_ex1_getting_started/ESP32_ex1_getting_started.ino:71:28: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
WiFi.begin(ssid, password);
^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ESP32_ex1_getting_started/ESP32_ex1_getting_started.ino:6:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/WiFi/src/WiFi.h:79:9: note: initializing argument 1 of 'int WiFiClass::begin(char*, const char*)'
int begin(char* ssid, const char *passphrase);
^~~~~
Multiple libraries were found for "WiFi.h"
Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/WiFi
Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/WiFiNINA
Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT
Result: FAIL
Result: PASS
Sketch uses 48068 bytes (18%) of program storage space. Maximum is 262144 bytes. Global variables use 3808 bytes (11%) of dynamic memory, leaving 28960 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 49060 bytes (18%) of program storage space. Maximum is 262144 bytes. Global variables use 3812 bytes (11%) of dynamic memory, leaving 28956 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 48588 bytes (18%) of program storage space. Maximum is 262144 bytes. Global variables use 3832 bytes (11%) of dynamic memory, leaving 28936 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex1_getting_started/Wemos_NodeMCU_ESP8266_ex1_getting_started.ino:6:10: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex2_virtual_pins/Wemos_NodeMCU_ESP8266_ex2_virtual_pins.ino:6:10: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex3_overview/Wemos_NodeMCU_ESP8266_ex3_overview.ino:6:10: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex4_read_write_IOs/Wemos_NodeMCU_ESP8266_ex4_read_write_IOs.ino:6:10: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex5_access_point/Wemos_NodeMCU_ESP8266_ex5_access_point.ino:6:10: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^~~~~~~~~~~~~~~
compilation terminated.
Result: PASS
Sketch uses 198110 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13096 bytes (3%) of dynamic memory, leaving 314584 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 232342 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 13648 bytes (4%) of dynamic memory, leaving 314032 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ArduinoUNO_ESP01_ex1_getting_started/ArduinoUNO_ESP01_ex1_getting_started.ino:7:47: error: use of deleted function 'SoftwareSerial::SoftwareSerial(const SoftwareSerial&)'
SoftwareSerial espSerial = SoftwareSerial(2,3); // arduino RX pin=2 arduino TX pin=3 connect the arduino RX pin to esp8266 module TX pin - connect the arduino TX pin to esp8266 module RX pin
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ArduinoUNO_ESP01_ex1_getting_started/ArduinoUNO_ESP01_ex1_getting_started.ino:6:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial/src/SoftwareSerial.h:94:5: note: declared here
SoftwareSerial(const SoftwareSerial&) = delete;
^
Multiple libraries were found for "SoftwareSerial.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ArduinoUNO_ESP01_ex2_virtual_pins/ArduinoUNO_ESP01_ex2_virtual_pins.ino:7:47: error: use of deleted function 'SoftwareSerial::SoftwareSerial(const SoftwareSerial&)'
SoftwareSerial espSerial = SoftwareSerial(2,3); // arduino RX pin=2 arduino TX pin=3 connect the arduino RX pin to esp8266 module TX pin - connect the arduino TX pin to esp8266 module RX pin
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ArduinoUNO_ESP01_ex2_virtual_pins/ArduinoUNO_ESP01_ex2_virtual_pins.ino:6:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial/src/SoftwareSerial.h:94:5: note: declared here
SoftwareSerial(const SoftwareSerial&) = delete;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ArduinoUNO_ESP01_ex2_virtual_pins/ArduinoUNO_ESP01_ex2_virtual_pins.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ArduinoUNO_ESP01_ex2_virtual_pins/ArduinoUNO_ESP01_ex2_virtual_pins.ino:63:35: error: 'analogWrite' was not declared in this scope
if (V[2]==1) analogWrite(6,128);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/ArduinoUNO_ESP01_ex2_virtual_pins/ArduinoUNO_ESP01_ex2_virtual_pins.ino:64:28: error: 'analogWrite' was not declared in this scope
else analogWrite(6,0);
^
Multiple libraries were found for "SoftwareSerial.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
Result: FAIL
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex1_UNO_getting_started/Bluetooth_ex1_UNO_getting_started.ino:7:47: error: use of deleted function 'SoftwareSerial::SoftwareSerial(const SoftwareSerial&)'
SoftwareSerial espSerial = SoftwareSerial(2,3); // arduino RX pin=2 arduino TX pin=3 connect the arduino RX pin to esp8266 module TX pin - connect the arduino TX pin to esp8266 module RX pin
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex1_UNO_getting_started/Bluetooth_ex1_UNO_getting_started.ino:6:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial/src/SoftwareSerial.h:94:5: note: declared here
SoftwareSerial(const SoftwareSerial&) = delete;
^
Multiple libraries were found for "SoftwareSerial.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex2_UNO_virtual_pins/Bluetooth_ex2_UNO_virtual_pins.ino:7:47: error: use of deleted function 'SoftwareSerial::SoftwareSerial(const SoftwareSerial&)'
SoftwareSerial espSerial = SoftwareSerial(2,3); // arduino RX pin=2 arduino TX pin=3 connect the arduino RX pin to esp8266 module TX pin - connect the arduino TX pin to esp8266 module RX pin
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex2_UNO_virtual_pins/Bluetooth_ex2_UNO_virtual_pins.ino:6:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial/src/SoftwareSerial.h:94:5: note: declared here
SoftwareSerial(const SoftwareSerial&) = delete;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex2_UNO_virtual_pins/Bluetooth_ex2_UNO_virtual_pins.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex2_UNO_virtual_pins/Bluetooth_ex2_UNO_virtual_pins.ino:56:33: error: 'analogWrite' was not declared in this scope
if (V[2]==0) analogWrite(6,0);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex2_UNO_virtual_pins/Bluetooth_ex2_UNO_virtual_pins.ino:57:40: error: 'analogWrite' was not declared in this scope
else if (V[2]==1) analogWrite(6,128);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Bluetooth_ex2_UNO_virtual_pins/Bluetooth_ex2_UNO_virtual_pins.ino:58:40: error: 'analogWrite' was not declared in this scope
else if (V[2]==2) analogWrite(6,255);
^
Multiple libraries were found for "SoftwareSerial.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
Result: PASS
Sketch uses 230362 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 13632 bytes (4%) of dynamic memory, leaving 314048 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 674010 bytes (51%) of program storage space. Maximum is 1310720 bytes. Global variables use 38156 bytes (11%) of dynamic memory, leaving 289524 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 249602 bytes (19%) of program storage space. Maximum is 1310720 bytes. Global variables use 14800 bytes (4%) of dynamic memory, leaving 312880 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex1_getting_started/Ethernet_ex1_getting_started.ino:12:16: error: cannot declare variable 'server' to be of abstract type 'EthernetServer'
EthernetServer server(8000); // Server port = 8000
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex1_getting_started/Ethernet_ex1_getting_started.ino:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet/src/Ethernet.h:253:7: note: because the following virtual functions are pure within 'EthernetServer':
class EthernetServer : public Server {
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:152:0,
from /tmp/arduino-sketch-0CBC42EF909EB4DFC947C8B9B0A7356E/sketch/Ethernet_ex1_getting_started.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Server.h:28:18: note: virtual void Server::begin(uint16_t)
virtual void begin(uint16_t port=0) =0;
^
Multiple libraries were found for "Ethernet.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EthernetENC
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex2_virtual_pins/Ethernet_ex2_virtual_pins.ino:12:16: error: cannot declare variable 'server' to be of abstract type 'EthernetServer'
EthernetServer server(8000); // Server port = 8000
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex2_virtual_pins/Ethernet_ex2_virtual_pins.ino:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet/src/Ethernet.h:253:7: note: because the following virtual functions are pure within 'EthernetServer':
class EthernetServer : public Server {
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:152:0,
from /tmp/arduino-sketch-6BE0AD4A0E93CAC8B4E2B753366AEFA4/sketch/Ethernet_ex2_virtual_pins.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Server.h:28:18: note: virtual void Server::begin(uint16_t)
virtual void begin(uint16_t port=0) =0;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex2_virtual_pins/Ethernet_ex2_virtual_pins.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex2_virtual_pins/Ethernet_ex2_virtual_pins.ino:63:35: error: 'analogWrite' was not declared in this scope
if (V[2]==1) analogWrite(6,128);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex2_virtual_pins/Ethernet_ex2_virtual_pins.ino:64:28: error: 'analogWrite' was not declared in this scope
else analogWrite(6,0);
^
Multiple libraries were found for "Ethernet.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EthernetENC
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex3_send_receive_text/Ethernet_ex3_send_receive_text.ino:12:16: error: cannot declare variable 'server' to be of abstract type 'EthernetServer'
EthernetServer server(8000); // Server port = 8000
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex3_send_receive_text/Ethernet_ex3_send_receive_text.ino:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet/src/Ethernet.h:253:7: note: because the following virtual functions are pure within 'EthernetServer':
class EthernetServer : public Server {
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:152:0,
from /tmp/arduino-sketch-4FBD7C2CD41B01783DE96B360D6D1F0E/sketch/Ethernet_ex3_send_receive_text.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Server.h:28:18: note: virtual void Server::begin(uint16_t)
virtual void begin(uint16_t port=0) =0;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex3_send_receive_text/Ethernet_ex3_send_receive_text.ino:19:8: error: conflicting declaration 'String T0'
String T0=""; // This text variable is synchronized with the Virtuino pin T0
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/variants/d1_mini32/pins_arduino.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:185,
from /tmp/arduino-sketch-4FBD7C2CD41B01783DE96B360D6D1F0E/sketch/Ethernet_ex3_send_receive_text.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/variants/d1_mini32/../d32/d32_core.h:40:22: note: previous declaration as 'const uint8_t T0'
static const uint8_t T0 = 4;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex3_send_receive_text/Ethernet_ex3_send_receive_text.ino:20:8: error: conflicting declaration 'String T1'
String T1=""; // This text variable is synchronized with the Virtuino pin T1
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/variants/d1_mini32/pins_arduino.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:185,
from /tmp/arduino-sketch-4FBD7C2CD41B01783DE96B360D6D1F0E/sketch/Ethernet_ex3_send_receive_text.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/variants/d1_mini32/../d32/d32_core.h:41:22: note: previous declaration as 'const uint8_t T1'
static const uint8_t T1 = 0;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex3_send_receive_text/Ethernet_ex3_send_receive_text.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex3_send_receive_text/Ethernet_ex3_send_receive_text.ino:61:11: error: ISO C++ forbids comparison between pointer and integer [-fpermissive]
if (T0=="ENABLE PIN 5") digitalWrite(5,HIGH);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex3_send_receive_text/Ethernet_ex3_send_receive_text.ino:62:16: error: ISO C++ forbids comparison between pointer and integer [-fpermissive]
else if (T0=="DISABLE PIN 5") digitalWrite(5,LOW);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex3_send_receive_text/Ethernet_ex3_send_receive_text.ino:65:5: error: assignment of read-only variable 'T1'
T1= "Hello Virtuino "+String(random(100));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex3_send_receive_text/Ethernet_ex3_send_receive_text.ino:65:5: error: cannot convert 'StringSumHelper' to 'const uint8_t {aka const unsigned char}' in assignment
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex3_send_receive_text/Ethernet_ex3_send_receive_text.ino: In function 'void onReceived(char, uint8_t, String)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex3_send_receive_text/Ethernet_ex3_send_receive_text.ino:90:31: error: assignment of read-only variable 'T0'
if (variableIndex==0) T0=valueAsText; // Store the text to the text variable T0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex3_send_receive_text/Ethernet_ex3_send_receive_text.ino:90:31: error: cannot convert 'String' to 'const uint8_t {aka const unsigned char}' in assignment
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex3_send_receive_text/Ethernet_ex3_send_receive_text.ino:91:36: error: assignment of read-only variable 'T1'
else if (variableIndex==1) T1=valueAsText; // Store the text to the text variable T1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex3_send_receive_text/Ethernet_ex3_send_receive_text.ino:91:36: error: cannot convert 'String' to 'const uint8_t {aka const unsigned char}' in assignment
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex3_send_receive_text/Ethernet_ex3_send_receive_text.ino: In function 'String onRequested(char, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex3_send_receive_text/Ethernet_ex3_send_receive_text.ino:105:33: error: converting to 'String' from initializer list would use explicit constructor 'String::String(unsigned char, unsigned char)'
if (variableIndex==0) return T0;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Ethernet_ex3_send_receive_text/Ethernet_ex3_send_receive_text.ino:106:38: error: converting to 'String' from initializer list would use explicit constructor 'String::String(unsigned char, unsigned char)'
else if (variableIndex==1) return T1;
^
Multiple libraries were found for "Ethernet.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EthernetENC
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex1_getting_started/Wemos_NodeMCU_ESP8266_ex1_getting_started.ino:6:25: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex2_virtual_pins/Wemos_NodeMCU_ESP8266_ex2_virtual_pins.ino:6:25: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex3_overview/Wemos_NodeMCU_ESP8266_ex3_overview.ino:6:25: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex4_read_write_IOs/Wemos_NodeMCU_ESP8266_ex4_read_write_IOs.ino:6:25: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/VirtuinoCM/examples/Wemos_NodeMCU_ESP8266_ex5_access_point/Wemos_NodeMCU_ESP8266_ex5_access_point.ino:6:25: fatal error: ESP8266WiFi.h: No such file or directory
#include <ESP8266WiFi.h>
^
compilation terminated.