Watch - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Watch

Version: 1.0.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion
arduino:avr:uno 1.8.4	Yes	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS
arduino:samd:mkrwifi1010 1.8.12	No	FAIL
esp32:esp32:d1_mini32 1.0.6	No	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

WARNING: library Watch claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Watch/src/Watch.cpp:21:45: error: default argument given for parameter 2 of 'Watch::Watch(const int&, const int&)' [-fpermissive]
 Watch::Watch(int const &L, int const &H = 0 ){
                                             ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Watch/src/Watch.cpp:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Watch/src/Watch.h:25:3: note: previous specification in 'Watch::Watch(const int&, const int&)' here
   Watch (int const &, int const & = 0); //Constructor by parameters
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Watch/src/Watch.cpp:36:58: error: default argument given for parameter 2 of 'void Watch::setWatch(const int&, const int&)' [-fpermissive]
 void Watch::setWatch(int const & sec, int const & dec = 0){
                                                          ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Watch/src/Watch.cpp:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Watch/src/Watch.h:30:8: note: previous specification in 'void Watch::setWatch(const int&, const int&)' here
   void setWatch (int const &l, int const &m=0);
        ^~~~~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library Watch claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

WARNING: library Watch claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Watch/src/Watch.cpp:21:45: error: default argument given for parameter 2 of 'Watch::Watch(const int&, const int&)' [-fpermissive]
 Watch::Watch(int const &L, int const &H = 0 ){
                                             ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Watch/src/Watch.cpp:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Watch/src/Watch.h:25:3: note: previous specification in 'Watch::Watch(const int&, const int&)' here
   Watch (int const &, int const & = 0); //Constructor by parameters
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Watch/src/Watch.cpp:36:58: error: default argument given for parameter 2 of 'void Watch::setWatch(const int&, const int&)' [-fpermissive]
 void Watch::setWatch(int const & sec, int const & dec = 0){
                                                          ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Watch/src/Watch.cpp:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Watch/src/Watch.h:30:8: note: previous specification in 'void Watch::setWatch(const int&, const int&)' here
   void setWatch (int const &l, int const &m=0);
        ^~~~~~~~

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

WARNING: library Watch claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Watch/src/Watch.cpp:21:45: error: default argument given for parameter 2 of 'Watch::Watch(const int&, const int&)' [-fpermissive]
 Watch::Watch(int const &L, int const &H = 0 ){
                                             ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Watch/src/Watch.cpp:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Watch/src/Watch.h:25:3: note: previous specification in 'Watch::Watch(const int&, const int&)' here
   Watch (int const &, int const & = 0); //Constructor by parameters
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Watch/src/Watch.cpp:36:58: error: default argument given for parameter 2 of 'void Watch::setWatch(const int&, const int&)' [-fpermissive]
 void Watch::setWatch(int const & sec, int const & dec = 0){
                                                          ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Watch/src/Watch.cpp:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Watch/src/Watch.h:30:8: note: previous specification in 'void Watch::setWatch(const int&, const int&)' here
   void setWatch (int const &l, int const &m=0);
        ^