This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.2
More details
| Board | Claims compatibility | Inclusion | WiFi101_OTA |
WiFi101_SD_OTA |
|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
No | FAIL | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes ⚠️ | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
No | FAIL | FAIL | FAIL |
Result: FAIL
WARNING: library WiFi101OTA claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/WiFi101OTA.cpp:30:4: error: #error "Unsupported board!"
#error "Unsupported board!"
^~~~~
�����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/InternalStorage.cpp:41:28: error: 'NVMCTRL_CTRLA_CMDEX_KEY' was not declared in this scope
NVMCTRL->CTRLA.reg = NVMCTRL_CTRLA_CMDEX_KEY | NVMCTRL_CTRLA_CMD_ER;
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/Interna/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/WiFi101OTA.cpp:33:30: note: suggested alternative: 'DORD'
#define BOARD_LENGTH (sizeof(BOARD) - 1)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/WiFi101OTA.cpp:187:17: note: in expansion of macro 'BOARD_LENGTH'
0x00, (50 + BOARD_LENGTH),
^~~~~~~~~~~~
Result: FAIL
WARNING: library WiFi101OTA claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/WiFi101OTA.cpp:30:4: error: #error "Unsupported board!"
#error "Unsupported board!"
^~~~~
�����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/InternalStorage.cpp:41:28: error: 'NVMCTRL_CTRLA_CMDEX_KEY' was not declared in this scope
NVMCTRL->CTRLA.reg = NVMCTRL_CTRLA_CMDEX_KEY | NVMCTRL_CTRLA_CMD_ER;
^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/Interna/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/WiFi101OTA.cpp:33:30: note: suggested alternative: 'DORD'
#define BOARD_LENGTH (sizeof(BOARD) - 1)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/WiFi101OTA.cpp:187:17: note: in expansion of macro 'BOARD_LENGTH'
0x00, (50 + BOARD_LENGTH),
^~~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/examples/WiFi101_SD_OTA/WiFi101_SD_OTA.ino:26:10: fatal error: SDU.h: No such file or directory
#include <SDU.h>
^~~~~~~
compilation terminated.
Result: FAIL
WARNING: library WiFi101OTA claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101/src/WiFiClient.h:28:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101/src/WiFi101.h:35,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/WiFi101OTA.h:24,
from /tmp/arduino-testlib2266870186/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101/src/socket/include/socket.h:1839:15: error: conflicting declaration of C function 'sint8 close(SOCKET)'
NMI_API sint8 close(SOCKET sock);
^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/platform/include/platform/platform.h:26:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/platform/include/platform/FileHandle.h:25,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/macros.h:41,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:2,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76,
from /tmp/arduino-sketch-F276FA67AC9D4086D9B276B338FD43AD/sketch/test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/platform/include/platform/mbed_retarget.h:749:9: note: previous declaration 'int close(int)'
int close(int fildes);
^~~~~
Result: FAIL
WARNING: library WiFi101OTA claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101/src/WiFiClient.h:28:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101/src/WiFi101.h:35,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/examples/WiFi101_OTA/WiFi101_OTA.ino:22:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101/src/socket/include/socket.h:1839:15: error: conflicting declaration of C function 'sint8 close(SOCKET)'
NMI_API sint8 close(SOCKET sock);
^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/platform/include/platform/platform.h:26:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/platform/include/platform/FileHandle.h:25,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/macros.h:41,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:2,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76,
from /tmp/arduino-sketch-1AD983ED7A7EAFF44E7A5AC9617A50EA/sketch/WiFi101_OTA.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/platform/include/platform/mbed_retarget.h:749:9: note: previous declaration 'int close(int)'
int close(int fildes);
^~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/examples/WiFi101_SD_OTA/WiFi101_SD_OTA.ino:26:10: fatal error: SDU.h: No such file or directory
#include <SDU.h>
^~~~~~~
compilation terminated.
Result: FAIL
WARNING: library WiFi101OTA claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/WiFi101OTA.cpp:30:4: error: #error "Unsupported board!"
#error "Unsupported board!"
^~~~~
������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/InternalStorage.cpp:41:14: error: base operand of '->' has non-pointer type 'NVMCTRL_t {aka NVMCTRL_struct}'
NVMCTRL->CTRLA.reg = NVMCTRL_CTRLA_CMDEX_KEY | NVMCTRL_CTRLA_CMD_ER;
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Wi/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/WiFi101OTA.cpp:33:30: note: suggested alternative: 'BOD'
#define BOARD_LENGTH (sizeof(BOARD) - 1)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/WiFi101OTA.cpp:187:17: note: in expansion of macro 'BOARD_LENGTH'
0x00, (50 + BOARD_LENGTH),
^~~~~~~~~~~~
NVMCTRL_CTRLA_CMDEX_KEY | NVMCTRL_CTRLA_CMD_ER;
^~~~~~~~~~~~~~~~~~~~~~~
NVMCTRL_CTRLA
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/InternalStorage.cpp:41:54: error: 'NVMCTRL_CTRLA_CMD_ER' was not declared in this scope
NVMCTRL->CTRLA.reg = NVMCTRL_CTRLA_CMDEX_KEY | NVMCTRL_CTRLA_CMD_ER;
^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/InternalStorage.cpp:41:54: note: suggested alternative: 'NVMCTRL_CTRLA'
NVMCTRL->CTRLA.reg = NVMCTRL_CTRLA_CMDEX_KEY | NVMCTRL_CTRLA_CMD_ER;
^~~~~~~~~~~~~~~~~~~~
NVMCTRL_CTRLA
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/InternalStorage.cpp:43:22: error: base operand of '->' has non-pointer type 'NVMCTRL_t {aka NVMCTRL_struct}'
while (!NVMCTRL->INTFLAG.bit.READY);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/InternalStorage.cpp: In function 'void copyFlashAndReset(int, int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/InternalStorage.cpp:58:22: error: base operand of '->' has non-pointer type 'NVMCTRL_t {aka NVMCTRL_struct}'
while (!NVMCTRL->INTFLAG.bit.READY);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/InternalStorage.cpp:61:5: error: 'NVIC_SystemReset' was not declared in this scope
NVIC_SystemReset();
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/InternalStorage.cpp: In member function 'virtual int InternalStorageClass::open()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/InternalStorage.cpp:71:10: error: base operand of '->' has non-pointer type 'NVMCTRL_t {aka NVMCTRL_struct}'
NVMCTRL->CTRLB.bit.MANW = 0;
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/InternalStorage.cpp: In member function 'virtual size_t InternalStorageClass::write(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/InternalStorage.cpp:90:20: error: base operand of '->' has non-pointer type 'NVMCTRL_t {aka NVMCTRL_struct}'
while (!NVMCTRL->INTFLAG.bit.READY);
^~
Result: FAIL
WARNING: library WiFi101OTA claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/WiFi101OTA.cpp:30:4: error: #error "Unsupported board!"
#error "Unsupported board!"
^~~~~
��������������������������������������������������������������������������������������������������������������������������������������������������������������������������
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/examples/WiFi101_SD_OTA/WiFi101_SD_OTA.ino:26:10: fatal error: SDU.h: No such file or directory
#include <SDU.h>
^~~~~~~
compilation terminated.
Result: FAIL
Result: FAIL
Result: FAIL
Result: FAIL
WARNING: library WiFi101OTA claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2Card.h:26:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/SdFat.h:29,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/SD.h:20,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/SDStorage.h:22,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/WiFi101OTA.h:28,
from /tmp/arduino-testlib2266870186/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2PinMap.h:524:2: error: #error Architecture or board not supported.
#error Architecture or board not supported.
^
Multiple libraries were found for "SD.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD
Not used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SD
Result: FAIL
WARNING: library WiFi101OTA claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2Card.h:26:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/SdFat.h:29,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/SD.h:20,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/SDStorage.h:22,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/src/WiFi101OTA.h:28,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/examples/WiFi101_OTA/WiFi101_OTA.ino:23:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2PinMap.h:524:2: error: #error Architecture or board not supported.
#error Architecture or board not supported.
^
Multiple libraries were found for "SD.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD
Not used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SD
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2Card.h:26:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/SdFat.h:29,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/SD.h:20,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/examples/WiFi101_SD_OTA/WiFi101_SD_OTA.ino:23:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2PinMap.h:524:2: error: #error Architecture or board not supported.
#error Architecture or board not supported.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101OTA/examples/WiFi101_SD_OTA/WiFi101_SD_OTA.ino:26:17: fatal error: SDU.h: No such file or directory
compilation terminated.
Multiple libraries were found for "SD.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD
Not used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SD