Winbond W25N - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Winbond W25N

Version: 0.2.5
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	WriteString
arduino:avr:uno 1.8.4	Yes	PASS	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	PASS
arduino:megaavr:nona4809 1.8.7	Yes	PASS	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	Yes ⚠️	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/WriteString

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/examples/WriteString/WriteString.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/examples/WriteString/WriteString.ino:11:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.begin(1000000);
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/examples/WriteString/WriteString.ino:11:3: note: suggested alternative: 'Serial'
   SerialUSB.begin(1000000);
   ^~~~~~~~~
   Serial

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 80722 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43616 bytes (16%) of dynamic memory, leaving 226720 bytes for local variables. Maximum is 270336 bytes.

examples/WriteString

Result: PASS

Sketch uses 82264 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44144 bytes (16%) of dynamic memory, leaving 226192 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 3246 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 40 bytes (0%) of dynamic memory, leaving 6104 bytes for local variables. Maximum is 6144 bytes.

examples/WriteString

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/examples/WriteString/WriteString.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/examples/WriteString/WriteString.ino:11:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.begin(1000000);
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/examples/WriteString/WriteString.ino:11:3: note: suggested alternative: 'Serial1'
   SerialUSB.begin(1000000);
   ^~~~~~~~~
   Serial1

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 13336 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3068 bytes (9%) of dynamic memory, leaving 29700 bytes for local variables. Maximum is 32768 bytes.

examples/WriteString

Result: PASS

Sketch uses 14752 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3608 bytes (11%) of dynamic memory, leaving 29160 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.cpp: In member function 'void W25N::sendData(char*, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.cpp:9:24: error: invalid conversion from 'char*' to 'uint8_t* {aka unsigned char*}' [-fpermissive]
   SPI.transfer(buf, len);
                        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.h:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SPI/src/SPI.h:70:10: note:   initializing argument 1 of 'void SPIClass::transfer(uint8_t*, uint32_t)'
     void transfer(uint8_t * data, uint32_t size);
          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.cpp: In member function 'int W25N::loadProgData(uint16_t, char*, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.cpp:120:38: error: invalid conversion from 'char*' to 'uint8_t* {aka unsigned char*}' [-fpermissive]
   SPI.transfer(cmdbuf, sizeof(cmdbuf));
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.h:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SPI/src/SPI.h:70:10: note:   initializing argument 1 of 'void SPIClass::transfer(uint8_t*, uint32_t)'
     void transfer(uint8_t * data, uint32_t size);
          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.cpp:121:28: error: invalid conversion from 'char*' to 'uint8_t* {aka unsigned char*}' [-fpermissive]
   SPI.transfer(buf, dataLen);
                            ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.h:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SPI/src/SPI.h:70:10: note:   initializing argument 1 of 'void SPIClass::transfer(uint8_t*, uint32_t)'
     void transfer(uint8_t * data, uint32_t size);
          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.cpp: In member function 'int W25N::loadRandProgData(uint16_t, char*, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.cpp:142:38: error: invalid conversion from 'char*' to 'uint8_t* {aka unsigned char*}' [-fpermissive]
   SPI.transfer(cmdbuf, sizeof(cmdbuf));
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.h:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SPI/src/SPI.h:70:10: note:   initializing argument 1 of 'void SPIClass::transfer(uint8_t*, uint32_t)'
     void transfer(uint8_t * data, uint32_t size);
          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.cpp:143:28: error: invalid conversion from 'char*' to 'uint8_t* {aka unsigned char*}' [-fpermissive]
   SPI.transfer(buf, dataLen);
                            ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.h:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SPI/src/SPI.h:70:10: note:   initializing argument 1 of 'void SPIClass::transfer(uint8_t*, uint32_t)'
     void transfer(uint8_t * data, uint32_t size);
          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.cpp: In member function 'int W25N::read(uint16_t, char*, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.cpp:186:38: error: invalid conversion from 'char*' to 'uint8_t* {aka unsigned char*}' [-fpermissive]
   SPI.transfer(cmdbuf, sizeof(cmdbuf));
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.h:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SPI/src/SPI.h:70:10: note:   initializing argument 1 of 'void SPIClass::transfer(uint8_t*, uint32_t)'
     void transfer(uint8_t * data, uint32_t size);
          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.cpp:187:28: error: invalid conversion from 'char*' to 'uint8_t* {aka unsigned char*}' [-fpermissive]
   SPI.transfer(buf, dataLen);
                            ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.h:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/src/WinbondW25N.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SPI/src/SPI.h:70:10: note:   initializing argument 1 of 'void SPIClass::transfer(uint8_t*, uint32_t)'
     void transfer(uint8_t * data, uint32_t size);
          ^

examples/WriteString

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/examples/WriteString/WriteString.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Winbond_W25N/examples/WriteString/WriteString.ino:11:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.begin(1000000);
   ^