XLR8Float - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

XLR8Float

Version: 2.0.1
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	XLR8FloatTest	xlr8_float_simple
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	No ⚠️	PASS	FAIL	PASS
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	FAIL	PASS
arduino:samd:mkrwifi1010 1.8.12	No ⚠️	PASS	FAIL	PASS
esp32:esp32:d1_mini32 1.0.6	No ⚠️	PASS	FAIL	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/XLR8FloatTest

Result: PASS

Sketch uses 6572 bytes (20%) of program storage space. Maximum is 32256 bytes.
Global variables use 678 bytes (33%) of dynamic memory, leaving 1370 bytes for local variables. Maximum is 2048 bytes.

examples/xlr8_float_simple

Result: PASS

Sketch uses 4206 bytes (13%) of program storage space. Maximum is 32256 bytes.
Global variables use 390 bytes (19%) of dynamic memory, leaving 1658 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

WARNING: library XLR8Float claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/XLR8FloatTest

Result: FAIL

WARNING: library XLR8Float claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:50:3: error: 'cli' was not declared in this scope
   cli();
   ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:54:3: error: 'TCCR1A' was not declared in this scope
   TCCR1A = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:55:3: error: 'TCCR1B' was not declared in this scope
   TCCR1B = (1 << CS10) ; // no prescaler
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:55:18: error: 'CS10' was not declared in this scope
   TCCR1B = (1 << CS10) ; // no prescaler
                  ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:55:18: note: suggested alternative: 'B110'
   TCCR1B = (1 << CS10) ; // no prescaler
                  ^~~~
                  B110
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:56:3: error: 'TCNT1' was not declared in this scope
   TCNT1 = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:56:3: note: suggested alternative: 'SCNd16'
   TCNT1 = 0;
   ^~~~~
   SCNd16
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:79:5: error: 'GPIOR1' was not declared in this scope
     GPIOR1 = 0x80; // flag to finish with failure
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:79:5: note: suggested alternative: 'SPI_1'
     GPIOR1 = 0x80; // flag to finish with failure
     ^~~~~~
     SPI_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:92:5: error: 'GPIOR1' was not declared in this scope
     GPIOR1 = (GPIOR1 == 0) ? 0xC0 : 0x80; // finish flag with either pass or fail status
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:92:5: note: suggested alternative: 'SPI_1'
     GPIOR1 = (GPIOR1 == 0) ? 0xC0 : 0x80; // finish flag with either pass or fail status
     ^~~~~~
     SPI_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino: In function 'int update_stats_float(int, statistics*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:129:3: error: 'TCNT1' was not declared in this scope
   TCNT1 = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:129:3: note: suggested alternative: 'SCNd16'
   TCNT1 = 0;
   ^~~~~
   SCNd16
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino: In function 'int update_stats_xlr8(int, statistics*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:147:3: error: 'TCNT1' was not declared in this scope
   TCNT1 = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:147:3: note: suggested alternative: 'SCNd16'
   TCNT1 = 0;
   ^~~~~
   SCNd16
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:152:30: error: call of overloaded 'xlr8FloatFromInt(int&)' is ambiguous
   x = xlr8FloatFromInt(newval);
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/XLR8Float.h:78:21: note: candidate: float xlr8FloatFromInt(uint16_t)
 static inline float xlr8FloatFromInt (uint16_t opa) {return (float)opa;}
                     ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/XLR8Float.h:79:21: note: candidate: float xlr8FloatFromInt(int16_t)
 static inline float xlr8FloatFromInt (int16_t opa) {return (float)opa;}
                     ^~~~~~~~~~~~~~~~

examples/xlr8_float_simple

Result: PASS

WARNING: library XLR8Float claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 82798 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43468 bytes (16%) of dynamic memory, leaving 226868 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library XLR8Float claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/XLR8FloatTest

Result: FAIL

WARNING: library XLR8Float claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:54:3: error: 'TCCR1A' was not declared in this scope
   TCCR1A = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:54:3: note: suggested alternative: 'TCB1'
   TCCR1A = 0;
   ^~~~~~
   TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:55:3: error: 'TCCR1B' was not declared in this scope
   TCCR1B = (1 << CS10) ; // no prescaler
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:55:3: note: suggested alternative: 'TCB1'
   TCCR1B = (1 << CS10) ; // no prescaler
   ^~~~~~
   TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:55:18: error: 'CS10' was not declared in this scope
   TCCR1B = (1 << CS10) ; // no prescaler
                  ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:55:18: note: suggested alternative: 'B110'
   TCCR1B = (1 << CS10) ; // no prescaler
                  ^~~~
                  B110
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:56:3: error: 'TCNT1' was not declared in this scope
   TCNT1 = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:56:3: note: suggested alternative: 'TCB1'
   TCNT1 = 0;
   ^~~~~
   TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino: In function 'int update_stats_float(int, statistics*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:129:3: error: 'TCNT1' was not declared in this scope
   TCNT1 = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:129:3: note: suggested alternative: 'TCB1'
   TCNT1 = 0;
   ^~~~~
   TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino: In function 'int update_stats_xlr8(int, statistics*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:147:3: error: 'TCNT1' was not declared in this scope
   TCNT1 = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:147:3: note: suggested alternative: 'TCB1'
   TCNT1 = 0;
   ^~~~~
   TCB1

examples/xlr8_float_simple

Result: PASS

WARNING: library XLR8Float claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 5318 bytes (10%) of program storage space. Maximum is 49152 bytes.
Global variables use 201 bytes (3%) of dynamic memory, leaving 5943 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

WARNING: library XLR8Float claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/XLR8FloatTest

Result: FAIL

WARNING: library XLR8Float claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:50:3: error: 'cli' was not declared in this scope
   cli();
   ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:50:3: note: suggested alternative: 'Gclk'
   cli();
   ^~~
   Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:54:3: error: 'TCCR1A' was not declared in this scope
   TCCR1A = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:54:3: note: suggested alternative: 'TCC1'
   TCCR1A = 0;
   ^~~~~~
   TCC1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:55:3: error: 'TCCR1B' was not declared in this scope
   TCCR1B = (1 << CS10) ; // no prescaler
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:55:3: note: suggested alternative: 'TCC1'
   TCCR1B = (1 << CS10) ; // no prescaler
   ^~~~~~
   TCC1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:55:18: error: 'CS10' was not declared in this scope
   TCCR1B = (1 << CS10) ; // no prescaler
                  ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:55:18: note: suggested alternative: 'SS1'
   TCCR1B = (1 << CS10) ; // no prescaler
                  ^~~~
                  SS1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:56:3: error: 'TCNT1' was not declared in this scope
   TCNT1 = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:56:3: note: suggested alternative: 'TCC1'
   TCNT1 = 0;
   ^~~~~
   TCC1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:79:5: error: 'GPIOR1' was not declared in this scope
     GPIOR1 = 0x80; // flag to finish with failure
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:79:5: note: suggested alternative: 'PORT'
     GPIOR1 = 0x80; // flag to finish with failure
     ^~~~~~
     PORT
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:92:5: error: 'GPIOR1' was not declared in this scope
     GPIOR1 = (GPIOR1 == 0) ? 0xC0 : 0x80; // finish flag with either pass or fail status
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:92:5: note: suggested alternative: 'PORT'
     GPIOR1 = (GPIOR1 == 0) ? 0xC0 : 0x80; // finish flag with either pass or fail status
     ^~~~~~
     PORT
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino: In function 'int update_stats_float(int, statistics*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:129:3: error: 'TCNT1' was not declared in this scope
   TCNT1 = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:129:3: note: suggested alternative: 'TCC1'
   TCNT1 = 0;
   ^~~~~
   TCC1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino: In function 'int update_stats_xlr8(int, statistics*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:147:3: error: 'TCNT1' was not declared in this scope
   TCNT1 = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:147:3: note: suggested alternative: 'TCC1'
   TCNT1 = 0;
   ^~~~~
   TCC1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:152:30: error: call of overloaded 'xlr8FloatFromInt(int&)' is ambiguous
   x = xlr8FloatFromInt(newval);
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/XLR8Float.h:78:21: note: candidate: float xlr8FloatFromInt(uint16_t)
 static inline float xlr8FloatFromInt (uint16_t opa) {return (float)opa;}
                     ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/XLR8Float.h:79:21: note: candidate: float xlr8FloatFromInt(int16_t)
 static inline float xlr8FloatFromInt (int16_t opa) {return (float)opa;}
                     ^~~~~~~~~~~~~~~~

examples/xlr8_float_simple

Result: PASS

WARNING: library XLR8Float claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 23868 bytes (9%) of program storage space. Maximum is 262144 bytes.
Global variables use 3020 bytes (9%) of dynamic memory, leaving 29748 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

WARNING: library XLR8Float claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 197768 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13092 bytes (3%) of dynamic memory, leaving 314588 bytes for local variables. Maximum is 327680 bytes.

examples/XLR8FloatTest

Result: FAIL

WARNING: library XLR8Float claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:54:3: error: 'TCCR1A' was not declared in this scope
   TCCR1A = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:55:3: error: 'TCCR1B' was not declared in this scope
   TCCR1B = (1 << CS10) ; // no prescaler
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:55:18: error: 'CS10' was not declared in this scope
   TCCR1B = (1 << CS10) ; // no prescaler
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:56:3: error: 'TCNT1' was not declared in this scope
   TCNT1 = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:79:5: error: 'GPIOR1' was not declared in this scope
     GPIOR1 = 0x80; // flag to finish with failure 
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:92:5: error: 'GPIOR1' was not declared in this scope
     GPIOR1 = (GPIOR1 == 0) ? 0xC0 : 0x80; // finish flag with either pass or fail status
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino: In function 'int update_stats_float(int, statistics*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:129:3: error: 'TCNT1' was not declared in this scope
   TCNT1 = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino: In function 'int update_stats_xlr8(int, statistics*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:147:3: error: 'TCNT1' was not declared in this scope
   TCNT1 = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:152:30: error: call of overloaded 'xlr8FloatFromInt(int&)' is ambiguous
   x = xlr8FloatFromInt(newval);
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/examples/XLR8FloatTest/XLR8FloatTest.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/XLR8Float.h:78:21: note: candidate: float xlr8FloatFromInt(uint16_t)
 static inline float xlr8FloatFromInt (uint16_t opa) {return (float)opa;}
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Float/XLR8Float.h:79:21: note: candidate: float xlr8FloatFromInt(int16_t)
 static inline float xlr8FloatFromInt (int16_t opa) {return (float)opa;}
                     ^

examples/xlr8_float_simple

Result: PASS

WARNING: library XLR8Float claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 205718 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13448 bytes (4%) of dynamic memory, leaving 314232 bytes for local variables. Maximum is 327680 bytes.