XLR8Servo - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

XLR8Servo

Version: 2.2.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	JitterTest	SweepAndHold
arduino:avr:uno 1.8.4	Yes ⚠️	FAIL	PASS	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	No	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	No	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL

In file included from /tmp/arduino-testlib3006802523/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/src/XLR8Servo.h:135:2: error: #error "XLR8Servo library requires Tools->Board->XLR8xxx selection. Install boards from https://github.com/AloriumTechnology/Arduino_Boards"
 #error "XLR8Servo library requires Tools->Board->XLR8xxx selection. Install boards from https://github.com/AloriumTechnology/Arduino_Boards"
  ^~~~~

examples/JitterTest

Result: PASS

Sketch uses 6522 bytes (20%) of program storage space. Maximum is 32256 bytes.
Global variables use 390 bytes (19%) of dynamic memory, leaving 1658 bytes for local variables. Maximum is 2048 bytes.

examples/SweepAndHold

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/SweepAndHold/SweepAndHold.ino:26:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/src/XLR8Servo.h:135:2: error: #error "XLR8Servo library requires Tools->Board->XLR8xxx selection. Install boards from https://github.com/AloriumTechnology/Arduino_Boards"
 #error "XLR8Servo library requires Tools->Board->XLR8xxx selection. Install boards from https://github.com/AloriumTechnology/Arduino_Boards"
  ^~~~~

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

WARNING: library XLR8Servo claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /tmp/arduino-testlib2991922810/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/src/XLR8Servo.h:135:2: error: #error "XLR8Servo library requires Tools->Board->XLR8xxx selection. Install boards from https://github.com/AloriumTechnology/Arduino_Boards"
 #error "XLR8Servo library requires Tools->Board->XLR8xxx selection. Install boards from https://github.com/AloriumTechnology/Arduino_Boards"
  ^~~~~

examples/JitterTest

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:73:31: error: 'clockCyclesToMicroseconds' was not declared in this scope
 const uint16_t controlIdeal = clockCyclesToMicroseconds(controlPWM * 64); // timer prescaler default is 64
                               ^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:73:31: note: suggested alternative: 'delayMicroseconds'
 const uint16_t controlIdeal = clockCyclesToMicroseconds(controlPWM * 64); // timer prescaler default is 64
                               ^~~~~~~~~~~~~~~~~~~~~~~~~
                               delayMicroseconds
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino: In function 'void measureControl()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:169:7: error: 'PIND' was not declared in this scope
   if (PIND & (1<<PIND3)) {
       ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:169:7: note: suggested alternative: 'SING'
   if (PIND & (1<<PIND3)) {
       ^~~~
       SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:169:18: error: 'PIND3' was not declared in this scope
   if (PIND & (1<<PIND3)) {
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:169:18: note: suggested alternative: 'PIN_A3'
   if (PIND & (1<<PIND3)) {
                  ^~~~~
                  PIN_A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino: In function 'void measureServo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:185:7: error: 'PIND' was not declared in this scope
   if (PIND & (1<<PIND3)) {
       ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:185:7: note: suggested alternative: 'SING'
   if (PIND & (1<<PIND3)) {
       ^~~~
       SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:185:18: error: 'PIND3' was not declared in this scope
   if (PIND & (1<<PIND3)) {
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:185:18: note: suggested alternative: 'PIN_A3'
   if (PIND & (1<<PIND3)) {
                  ^~~~~
                  PIN_A3
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/SweepAndHold

Result: FAIL

WARNING: library XLR8Servo claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/SweepAndHold/SweepAndHold.ino:26:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/src/XLR8Servo.h:135:2: error: #error "XLR8Servo library requires Tools->Board->XLR8xxx selection. Install boards from https://github.com/AloriumTechnology/Arduino_Boards"
 #error "XLR8Servo library requires Tools->Board->XLR8xxx selection. Install boards from https://github.com/AloriumTechnology/Arduino_Boards"
  ^~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL

WARNING: library XLR8Servo claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /tmp/arduino-testlib2991922810/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/src/XLR8Servo.h:135:2: error: #error "XLR8Servo library requires Tools->Board->XLR8xxx selection. Install boards from https://github.com/AloriumTechnology/Arduino_Boards"
 #error "XLR8Servo library requires Tools->Board->XLR8xxx selection. Install boards from https://github.com/AloriumTechnology/Arduino_Boards"
  ^~~~~

examples/JitterTest

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino: In function 'void measureControl()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:169:7: error: 'PIND' was not declared in this scope
   if (PIND & (1<<PIND3)) {
       ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:169:7: note: suggested alternative: 'PIN0'
   if (PIND & (1<<PIND3)) {
       ^~~~
       PIN0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:169:18: error: 'PIND3' was not declared in this scope
   if (PIND & (1<<PIND3)) {
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:169:18: note: suggested alternative: 'PIN3'
   if (PIND & (1<<PIND3)) {
                  ^~~~~
                  PIN3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino: In function 'void measureServo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:185:7: error: 'PIND' was not declared in this scope
   if (PIND & (1<<PIND3)) {
       ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:185:7: note: suggested alternative: 'PIN0'
   if (PIND & (1<<PIND3)) {
       ^~~~
       PIN0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:185:18: error: 'PIND3' was not declared in this scope
   if (PIND & (1<<PIND3)) {
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:185:18: note: suggested alternative: 'PIN3'
   if (PIND & (1<<PIND3)) {
                  ^~~~~
                  PIN3
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart

examples/SweepAndHold

Result: FAIL

WARNING: library XLR8Servo claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/SweepAndHold/SweepAndHold.ino:26:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/src/XLR8Servo.h:135:2: error: #error "XLR8Servo library requires Tools->Board->XLR8xxx selection. Install boards from https://github.com/AloriumTechnology/Arduino_Boards"
 #error "XLR8Servo library requires Tools->Board->XLR8xxx selection. Install boards from https://github.com/AloriumTechnology/Arduino_Boards"
  ^~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

WARNING: library XLR8Servo claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /tmp/arduino-testlib3006802523/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/src/XLR8Servo.h:135:2: error: #error "XLR8Servo library requires Tools->Board->XLR8xxx selection. Install boards from https://github.com/AloriumTechnology/Arduino_Boards"
 #error "XLR8Servo library requires Tools->Board->XLR8xxx selection. Install boards from https://github.com/AloriumTechnology/Arduino_Boards"
  ^~~~~

examples/JitterTest

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino: In function 'void measureControl()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:169:7: error: 'PIND' was not declared in this scope
   if (PIND & (1<<PIND3)) {
       ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:169:7: note: suggested alternative: 'SING'
   if (PIND & (1<<PIND3)) {
       ^~~~
       SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:169:18: error: 'PIND3' was not declared in this scope
   if (PIND & (1<<PIND3)) {
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:169:18: note: suggested alternative: 'PIN_A3'
   if (PIND & (1<<PIND3)) {
                  ^~~~~
                  PIN_A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino: In function 'void measureServo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:185:7: error: 'PIND' was not declared in this scope
   if (PIND & (1<<PIND3)) {
       ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:185:7: note: suggested alternative: 'SING'
   if (PIND & (1<<PIND3)) {
       ^~~~
       SING
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:185:18: error: 'PIND3' was not declared in this scope
   if (PIND & (1<<PIND3)) {
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:185:18: note: suggested alternative: 'PIN_A3'
   if (PIND & (1<<PIND3)) {
                  ^~~~~
                  PIN_A3
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/SweepAndHold

Result: FAIL

WARNING: library XLR8Servo claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/SweepAndHold/SweepAndHold.ino:26:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/src/XLR8Servo.h:135:2: error: #error "XLR8Servo library requires Tools->Board->XLR8xxx selection. Install boards from https://github.com/AloriumTechnology/Arduino_Boards"
 #error "XLR8Servo library requires Tools->Board->XLR8xxx selection. Install boards from https://github.com/AloriumTechnology/Arduino_Boards"
  ^~~~~

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/src/XLR8Servo.cpp:25:27: fatal error: avr/interrupt.h: No such file or directory
compilation terminated.

examples/JitterTest

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:97:36: error: 'analogWrite' was not declared in this scope
   analogWrite(controlPin,controlPWM);
                                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino: In function 'void measureControl()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:169:7: error: 'PIND' was not declared in this scope
   if (PIND & (1<<PIND3)) {
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:169:18: error: 'PIND3' was not declared in this scope
   if (PIND & (1<<PIND3)) {
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino: In function 'void measureServo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:185:7: error: 'PIND' was not declared in this scope
   if (PIND & (1<<PIND3)) {
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/examples/JitterTest/JitterTest.ino:185:18: error: 'PIND3' was not declared in this scope
   if (PIND & (1<<PIND3)) {
                  ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo

examples/SweepAndHold

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XLR8Servo/src/XLR8Servo.cpp:25:27: fatal error: avr/interrupt.h: No such file or directory
compilation terminated.