Xbox 360 Controller LEDs - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Xbox 360 Controller LEDs

Version: 1.1.2
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	Blink	CycleAll	InterruptTimer	USB	UserOutput
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	PASS	FAIL	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	PASS	PASS	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	PASS	PASS	FAIL	FAIL	PASS
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	PASS	FAIL	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	PASS	PASS	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/Blink

Result: PASS

Sketch uses 1752 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 212 bytes (10%) of dynamic memory, leaving 1836 bytes for local variables. Maximum is 2048 bytes.

examples/CycleAll

Result: PASS

Sketch uses 1958 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 215 bytes (10%) of dynamic memory, leaving 1833 bytes for local variables. Maximum is 2048 bytes.

examples/InterruptTimer

Result: PASS

Sketch uses 1850 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 212 bytes (10%) of dynamic memory, leaving 1836 bytes for local variables. Maximum is 2048 bytes.

examples/USB

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XInput/src/XInput.cpp:53:4: error: #error "This board does not support XInput! You must use a USB capable board with the corresponding XInput boards package. See the list of supported boards in the 'extras' folder for more information"
   #error "This board does not support XInput! You must use a USB capable board with the corresponding XInput boards package. See the list of supported boards in the 'extras' folder for more information"
    ^~~~~

examples/UserOutput

Result: PASS

Sketch uses 4360 bytes (13%) of program storage space. Maximum is 32256 bytes.
Global variables use 306 bytes (14%) of dynamic memory, leaving 1742 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/Blink

Result: PASS

Sketch uses 79634 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43480 bytes (16%) of dynamic memory, leaving 226856 bytes for local variables. Maximum is 270336 bytes.

examples/CycleAll

Result: PASS

Sketch uses 79734 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43488 bytes (16%) of dynamic memory, leaving 226848 bytes for local variables. Maximum is 270336 bytes.

examples/InterruptTimer

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Xbox_360_Controller_LEDs/examples/InterruptTimer/InterruptTimer.ino:37:2: error: #error Interrupt registers not defined! Please try setting board to either Uno or Nano.
 #error Interrupt registers not defined! Please try setting board to either Uno or Nano.
  ^~~~~

examples/USB

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XInput/src/XInput.cpp:53:4: error: #error "This board does not support XInput! You must use a USB capable board with the corresponding XInput boards package. See the list of supported boards in the 'extras' folder for more information"
   #error "This board does not support XInput! You must use a USB capable board with the corresponding XInput boards package. See the list of supported boards in the 'extras' folder for more information"
    ^~~~~

examples/UserOutput

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Xbox_360_Controller_LEDs/examples/UserOutput/UserOutput.ino:32:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet.  See comments in FastLED/led_sysdefs.h for options."
 #error "This platform isn't recognized by FastLED... yet.  See comments in FastLED/led_sysdefs.h for options."
  ^~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/Blink

Result: PASS

Sketch uses 2138 bytes (4%) of program storage space. Maximum is 49152 bytes.
Global variables use 43 bytes (0%) of dynamic memory, leaving 6101 bytes for local variables. Maximum is 6144 bytes.

examples/CycleAll

Result: PASS

Sketch uses 2342 bytes (4%) of program storage space. Maximum is 49152 bytes.
Global variables use 52 bytes (0%) of dynamic memory, leaving 6092 bytes for local variables. Maximum is 6144 bytes.

examples/InterruptTimer

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Xbox_360_Controller_LEDs/examples/InterruptTimer/InterruptTimer.ino:37:2: error: #error Interrupt registers not defined! Please try setting board to either Uno or Nano.
 #error Interrupt registers not defined! Please try setting board to either Uno or Nano.
  ^~~~~

examples/USB

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XInput/src/XInput.cpp:53:4: error: #error "This board does not support XInput! You must use a USB capable board with the corresponding XInput boards package. See the list of supported boards in the 'extras' folder for more information"
   #error "This board does not support XInput! You must use a USB capable board with the corresponding XInput boards package. See the list of supported boards in the 'extras' folder for more information"
    ^~~~~

examples/UserOutput

Result: PASS

Sketch uses 4846 bytes (9%) of program storage space. Maximum is 49152 bytes.
Global variables use 113 bytes (1%) of dynamic memory, leaving 6031 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/Blink

Result: PASS

Sketch uses 13032 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 3028 bytes (9%) of dynamic memory, leaving 29740 bytes for local variables. Maximum is 32768 bytes.

examples/CycleAll

Result: PASS

Sketch uses 13120 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3036 bytes (9%) of dynamic memory, leaving 29732 bytes for local variables. Maximum is 32768 bytes.

examples/InterruptTimer

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Xbox_360_Controller_LEDs/examples/InterruptTimer/InterruptTimer.ino:37:2: error: #error Interrupt registers not defined! Please try setting board to either Uno or Nano.
 #error Interrupt registers not defined! Please try setting board to either Uno or Nano.
  ^~~~~

examples/USB

Result: PASS

Sketch uses 16248 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3100 bytes (9%) of dynamic memory, leaving 29668 bytes for local variables. Maximum is 32768 bytes.

examples/UserOutput

Result: PASS

Sketch uses 15924 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3124 bytes (9%) of dynamic memory, leaving 29644 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 197938 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13100 bytes (3%) of dynamic memory, leaving 314580 bytes for local variables. Maximum is 327680 bytes.

examples/Blink

Result: PASS

Sketch uses 200002 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13288 bytes (4%) of dynamic memory, leaving 314392 bytes for local variables. Maximum is 327680 bytes.

examples/CycleAll

Result: PASS

Sketch uses 200062 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13296 bytes (4%) of dynamic memory, leaving 314384 bytes for local variables. Maximum is 327680 bytes.

examples/InterruptTimer

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Xbox_360_Controller_LEDs/examples/InterruptTimer/InterruptTimer.ino:37:2: error: #error Interrupt registers not defined! Please try setting board to either Uno or Nano.
 #error Interrupt registers not defined! Please try setting board to either Uno or Nano.
  ^

examples/USB

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XInput/src/XInput.cpp:53:4: error: #error "This board does not support XInput! You must use a USB capable board with the corresponding XInput boards package. See the list of supported boards in the 'extras' folder for more information"
   #error "This board does not support XInput! You must use a USB capable board with the corresponding XInput boards package. See the list of supported boards in the 'extras' folder for more information"
    ^

examples/UserOutput

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Xbox_360_Controller_LEDs/examples/UserOutput/UserOutput.ino:32:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined.  All SPI access will default to bitbanged output
 #      pragma message "No hardware SPI pins defined.  All SPI access will default to bitbanged output"
                       ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/esp/32/fastled_esp32.h:12:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms.h:36,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:54,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Xbox_360_Controller_LEDs/examples/UserOutput/UserOutput.ino:32:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/esp/32/clockless_rmt_esp32.h: In instantiation of 'class ClocklessController<6, 60, 150, 90, (EOrder)66u, 0, false, 5>':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/chipsets.h:578:7:   required from 'class WS2812Controller800Khz<6u, (EOrder)66u>'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:107:52:   required from 'class WS2812B<6u, (EOrder)66u>'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:304:39:   required from 'static CLEDController& CFastLED::addLeds(CRGB*, int, int) [with CHIPSET = WS2812B; unsigned char DATA_PIN = 6u; EOrder RGB_ORDER = (EOrder)66u]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Xbox_360_Controller_LEDs/examples/UserOutput/UserOutput.ino:51:65:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/esp/32/clockless_rmt_esp32.h:358:5: error: static assertion failed: Invalid pin specified
     static_assert(FastPin<DATA_PIN>::validpin(), "Invalid pin specified");
     ^