Zaber Binary - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Zaber Binary

Version: 1.2.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	2D_Scan	Basic_Homing	Intermediate_SoftMaxPosition	Track_Manual_Moves
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	PASS	PASS	PASS	PASS
arduino:megaavr:nona4809 1.8.7	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/2D_Scan

Result: PASS

Sketch uses 9080 bytes (28%) of program storage space. Maximum is 32256 bytes.
Global variables use 578 bytes (28%) of dynamic memory, leaving 1470 bytes for local variables. Maximum is 2048 bytes.

examples/Basic_Homing

Result: PASS

Sketch uses 3910 bytes (12%) of program storage space. Maximum is 32256 bytes.
Global variables use 261 bytes (12%) of dynamic memory, leaving 1787 bytes for local variables. Maximum is 2048 bytes.

examples/Intermediate_SoftMaxPosition

Result: PASS

Sketch uses 4320 bytes (13%) of program storage space. Maximum is 32256 bytes.
Global variables use 261 bytes (12%) of dynamic memory, leaving 1787 bytes for local variables. Maximum is 2048 bytes.

examples/Track_Manual_Moves

Result: PASS

Sketch uses 7334 bytes (22%) of program storage space. Maximum is 32256 bytes.
Global variables use 630 bytes (30%) of dynamic memory, leaving 1418 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

examples/2D_Scan

Result: PASS

Sketch uses 83984 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44256 bytes (16%) of dynamic memory, leaving 226080 bytes for local variables. Maximum is 270336 bytes.

examples/Basic_Homing

Result: PASS

Sketch uses 82518 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44256 bytes (16%) of dynamic memory, leaving 226080 bytes for local variables. Maximum is 270336 bytes.

examples/Intermediate_SoftMaxPosition

Result: PASS

Sketch uses 82668 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44256 bytes (16%) of dynamic memory, leaving 226080 bytes for local variables. Maximum is 270336 bytes.

examples/Track_Manual_Moves

Result: PASS

Sketch uses 83646 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44256 bytes (16%) of dynamic memory, leaving 226080 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:141:0,
                 from /tmp/arduino-sketch-CC8CF9AB12B48AC2D960E44FA3A38767/sketch/test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/USBCore.h:40:22: error: expected identifier before numeric constant
 #define GET_STATUS   0
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/USBCore.h:40:22: error: expected '}' before numeric constant
 #define GET_STATUS   0
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/USBCore.h:40:22: error: expected unqualified-id before numeric constant
 #define GET_STATUS   0
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
In file included from /tmp/arduino-testlib4069598750/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:41:27: error: expected ')' before '&' token
         ZaberBinary(Stream& serial);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:99:5: error: expected unqualified-id before 'private'
     private:
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:108:1: error: expected declaration before '}' token
 };
 ^

examples/2D_Scan

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:141:0,
                 from /tmp/arduino-sketch-0E9ECD5076D6CD6C578EB95580B2643D/sketch/2D_Scan.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/USBCore.h:40:22: error: expected identifier before numeric constant
 #define GET_STATUS   0
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/USBCore.h:40:22: error: expected '}' before numeric constant
 #define GET_STATUS   0
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/USBCore.h:40:22: error: expected unqualified-id before numeric constant
 #define GET_STATUS   0
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/examples/2D_Scan/2D_Scan.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:41:27: error: expected ')' before '&' token
         ZaberBinary(Stream& serial);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:99:5: error: expected unqualified-id before 'private'
     private:
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:108:1: error: expected declaration before '}' token
 };
 ^

examples/Basic_Homing

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:141:0,
                 from /tmp/arduino-sketch-F97065DEA5F51995D11E0A444960372D/sketch/Basic_Homing.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/USBCore.h:40:22: error: expected identifier before numeric constant
 #define GET_STATUS   0
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/USBCore.h:40:22: error: expected '}' before numeric constant
 #define GET_STATUS   0
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/USBCore.h:40:22: error: expected unqualified-id before numeric constant
 #define GET_STATUS   0
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/examples/Basic_Homing/Basic_Homing.ino:9:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:41:27: error: expected ')' before '&' token
         ZaberBinary(Stream& serial);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:99:5: error: expected unqualified-id before 'private'
     private:
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:108:1: error: expected declaration before '}' token
 };
 ^

examples/Intermediate_SoftMaxPosition

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:141:0,
                 from /tmp/arduino-sketch-70F7FD0348ED5668995D777D87E94029/sketch/Intermediate_SoftMaxPosition.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/USBCore.h:40:22: error: expected identifier before numeric constant
 #define GET_STATUS   0
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/USBCore.h:40:22: error: expected '}' before numeric constant
 #define GET_STATUS   0
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/USBCore.h:40:22: error: expected unqualified-id before numeric constant
 #define GET_STATUS   0
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/examples/Intermediate_SoftMaxPosition/Intermediate_SoftMaxPosition.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:41:27: error: expected ')' before '&' token
         ZaberBinary(Stream& serial);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:99:5: error: expected unqualified-id before 'private'
     private:
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:108:1: error: expected declaration before '}' token
 };
 ^

examples/Track_Manual_Moves

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:141:0,
                 from /tmp/arduino-sketch-1BFBD8E4A98DD93556C95A892A9289ED/sketch/Track_Manual_Moves.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/USBCore.h:40:22: error: expected identifier before numeric constant
 #define GET_STATUS   0
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/USBCore.h:40:22: error: expected '}' before numeric constant
 #define GET_STATUS   0
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/USBCore.h:40:22: error: expected unqualified-id before numeric constant
 #define GET_STATUS   0
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/examples/Track_Manual_Moves/Track_Manual_Moves.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:41:27: error: expected ')' before '&' token
         ZaberBinary(Stream& serial);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:99:5: error: expected unqualified-id before 'private'
     private:
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:108:1: error: expected declaration before '}' token
 };
 ^

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:111:0,
                 from /tmp/arduino-sketch-1C95898FE44BF4DCA809B6E2B31C8465/sketch/test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/USB/USBCore.h:23:24: error: expected identifier before numeric constant
 #define GET_STATUS     0
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/USB/USBCore.h:23:24: error: expected '}' before numeric constant
 #define GET_STATUS     0
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/USB/USBCore.h:23:24: error: expected unqualified-id before numeric constant
 #define GET_STATUS     0
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
In file included from /tmp/arduino-testlib1792926351/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:41:27: error: expected ')' before '&' token
         ZaberBinary(Stream& serial);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:99:5: error: expected unqualified-id before 'private'
     private:
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:108:1: error: expected declaration before '}' token
 };
 ^

examples/2D_Scan

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:111:0,
                 from /tmp/arduino-sketch-0E9ECD5076D6CD6C578EB95580B2643D/sketch/2D_Scan.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/USB/USBCore.h:23:24: error: expected identifier before numeric constant
 #define GET_STATUS     0
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/USB/USBCore.h:23:24: error: expected '}' before numeric constant
 #define GET_STATUS     0
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/USB/USBCore.h:23:24: error: expected unqualified-id before numeric constant
 #define GET_STATUS     0
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/examples/2D_Scan/2D_Scan.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:41:27: error: expected ')' before '&' token
         ZaberBinary(Stream& serial);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:99:5: error: expected unqualified-id before 'private'
     private:
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:108:1: error: expected declaration before '}' token
 };
 ^

examples/Basic_Homing

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:111:0,
                 from /tmp/arduino-sketch-F97065DEA5F51995D11E0A444960372D/sketch/Basic_Homing.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/USB/USBCore.h:23:24: error: expected identifier before numeric constant
 #define GET_STATUS     0
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/USB/USBCore.h:23:24: error: expected '}' before numeric constant
 #define GET_STATUS     0
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/USB/USBCore.h:23:24: error: expected unqualified-id before numeric constant
 #define GET_STATUS     0
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/examples/Basic_Homing/Basic_Homing.ino:9:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:41:27: error: expected ')' before '&' token
         ZaberBinary(Stream& serial);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:99:5: error: expected unqualified-id before 'private'
     private:
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:108:1: error: expected declaration before '}' token
 };
 ^

examples/Intermediate_SoftMaxPosition

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:111:0,
                 from /tmp/arduino-sketch-70F7FD0348ED5668995D777D87E94029/sketch/Intermediate_SoftMaxPosition.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/USB/USBCore.h:23:24: error: expected identifier before numeric constant
 #define GET_STATUS     0
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/USB/USBCore.h:23:24: error: expected '}' before numeric constant
 #define GET_STATUS     0
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/USB/USBCore.h:23:24: error: expected unqualified-id before numeric constant
 #define GET_STATUS     0
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/examples/Intermediate_SoftMaxPosition/Intermediate_SoftMaxPosition.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:41:27: error: expected ')' before '&' token
         ZaberBinary(Stream& serial);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:99:5: error: expected unqualified-id before 'private'
     private:
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:108:1: error: expected declaration before '}' token
 };
 ^

examples/Track_Manual_Moves

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:111:0,
                 from /tmp/arduino-sketch-1BFBD8E4A98DD93556C95A892A9289ED/sketch/Track_Manual_Moves.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/USB/USBCore.h:23:24: error: expected identifier before numeric constant
 #define GET_STATUS     0
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/USB/USBCore.h:23:24: error: expected '}' before numeric constant
 #define GET_STATUS     0
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/USB/USBCore.h:23:24: error: expected unqualified-id before numeric constant
 #define GET_STATUS     0
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:32:21: note: in expansion of macro 'GET_STATUS'
                     GET_STATUS = 54
                     ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/examples/Track_Manual_Moves/Track_Manual_Moves.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:41:27: error: expected ')' before '&' token
         ZaberBinary(Stream& serial);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:99:5: error: expected unqualified-id before 'private'
     private:
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Zaber_Binary/ZaberBinary.h:108:1: error: expected declaration before '}' token
 };
 ^

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

examples/2D_Scan

Result: FAIL

examples/Basic_Homing

Result: FAIL

examples/Intermediate_SoftMaxPosition

Result: FAIL

examples/Track_Manual_Moves

Result: FAIL