This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.1
More details
| Board | Claims compatibility | Inclusion | analogComp_combineExample |
analogComp_interrupt |
analogComp_simple |
autoTrigger_adc |
interrupt_adc |
simple_adc |
simple_adc_8bit |
|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
Result: PASS
Sketch uses 592 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 2008 bytes (6%) of program storage space. Maximum is 32256 bytes. Global variables use 192 bytes (9%) of dynamic memory, leaving 1856 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 1726 bytes (5%) of program storage space. Maximum is 32256 bytes. Global variables use 194 bytes (9%) of dynamic memory, leaving 1854 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 1678 bytes (5%) of program storage space. Maximum is 32256 bytes. Global variables use 188 bytes (9%) of dynamic memory, leaving 1860 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 1912 bytes (5%) of program storage space. Maximum is 32256 bytes. Global variables use 188 bytes (9%) of dynamic memory, leaving 1860 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 2058 bytes (6%) of program storage space. Maximum is 32256 bytes. Global variables use 190 bytes (9%) of dynamic memory, leaving 1858 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 1898 bytes (5%) of program storage space. Maximum is 32256 bytes. Global variables use 188 bytes (9%) of dynamic memory, leaving 1860 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 2048 bytes (6%) of program storage space. Maximum is 32256 bytes. Global variables use 188 bytes (9%) of dynamic memory, leaving 1860 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:56:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC0'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:63:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC0'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:69:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:103:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:121:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<A
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:56:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC0'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:63:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC0'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:69:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:103:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:121:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<A
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:56:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC0'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:63:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC0'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:69:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:103:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:121:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<A
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:56:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC0'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:63:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC0'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:69:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:103:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:121:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<A
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:56:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC0'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:63:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC0'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:69:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:103:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:121:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<A
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:56:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC0'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:63:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC0'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:69:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:103:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:121:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<A
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:56:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC0'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:63:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC0'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:69:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:103:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:121:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<A
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: note: suggested alternative: 'MAX'
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
MAX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:56:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC0'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:63:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC0'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:69:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:103:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:121:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<A
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC0'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC0'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: note: suggested alternative: 'VREF_t'
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
VREF_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: note: suggested alternative: 'VREF_t'
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
VREF_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: note: suggested alternative: 'ADC_A7'
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerEnable(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:21: error: 'ADATE' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: error: 'ADCSRB' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: note: suggested alternative: 'ADC_A7'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: error: 'ADTS2' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: note: suggested alternative: 'ADC_A2'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: error: 'ADTS1' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: note: suggested alternative: 'ADC_A1'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) |
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC0'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC0'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: note: suggested alternative: 'VREF_t'
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
VREF_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: note: suggested alternative: 'VREF_t'
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
VREF_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: note: suggested alternative: 'ADC_A7'
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerEnable(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:21: error: 'ADATE' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: error: 'ADCSRB' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: note: suggested alternative: 'ADC_A7'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: error: 'ADTS2' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: note: suggested alternative: 'ADC_A2'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: error: 'ADTS1' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: note: suggested alternative: 'ADC_A1'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) |
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC0'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC0'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: note: suggested alternative: 'VREF_t'
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
VREF_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: note: suggested alternative: 'VREF_t'
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
VREF_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: note: suggested alternative: 'ADC_A7'
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerEnable(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:21: error: 'ADATE' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: error: 'ADCSRB' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: note: suggested alternative: 'ADC_A7'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: error: 'ADTS2' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: note: suggested alternative: 'ADC_A2'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: error: 'ADTS1' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: note: suggested alternative: 'ADC_A1'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) |
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC0'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC0'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: note: suggested alternative: 'VREF_t'
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
VREF_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: note: suggested alternative: 'VREF_t'
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
VREF_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: note: suggested alternative: 'ADC_A7'
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerEnable(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:21: error: 'ADATE' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: error: 'ADCSRB' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: note: suggested alternative: 'ADC_A7'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: error: 'ADTS2' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: note: suggested alternative: 'ADC_A2'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: error: 'ADTS1' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: note: suggested alternative: 'ADC_A1'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) |
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC0'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC0'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: note: suggested alternative: 'VREF_t'
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
VREF_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: note: suggested alternative: 'VREF_t'
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
VREF_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: note: suggested alternative: 'ADC_A7'
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerEnable(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:21: error: 'ADATE' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: error: 'ADCSRB' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: note: suggested alternative: 'ADC_A7'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: error: 'ADTS2' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: note: suggested alternative: 'ADC_A2'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: error: 'ADTS1' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: note: suggested alternative: 'ADC_A1'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) |
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC0'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC0'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: note: suggested alternative: 'VREF_t'
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
VREF_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: note: suggested alternative: 'VREF_t'
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
VREF_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: note: suggested alternative: 'ADC_A7'
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerEnable(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:21: error: 'ADATE' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: error: 'ADCSRB' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: note: suggested alternative: 'ADC_A7'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: error: 'ADTS2' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: note: suggested alternative: 'ADC_A2'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: error: 'ADTS1' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: note: suggested alternative: 'ADC_A1'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) |
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC0'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC0'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: note: suggested alternative: 'VREF_t'
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
VREF_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: note: suggested alternative: 'VREF_t'
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
VREF_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: note: suggested alternative: 'ADC_A7'
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerEnable(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:21: error: 'ADATE' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: error: 'ADCSRB' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: note: suggested alternative: 'ADC_A7'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: error: 'ADTS2' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: note: suggested alternative: 'ADC_A2'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: error: 'ADTS1' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: note: suggested alternative: 'ADC_A1'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) |
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC0'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC0'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: note: suggested alternative: 'VREF_t'
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
VREF_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: note: suggested alternative: 'VREF_t'
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
VREF_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: note: suggested alternative: 'ADC_A7'
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerEnable(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:21: error: 'ADATE' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: error: 'ADCSRB' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: note: suggested alternative: 'ADC_A7'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: error: 'ADTS2' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: note: suggested alternative: 'ADC_A2'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: error: 'ADTS1' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: note: suggested alternative: 'ADC_A1'
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) |
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:56:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:63:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:69:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC_A0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:103:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:121:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: note: suggested alternative: 'ADC_A7'
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:56:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:63:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:69:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC_A0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:103:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:121:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: note: suggested alternative: 'ADC_A7'
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:56:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:63:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:69:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC_A0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:103:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:121:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: note: suggested alternative: 'ADC_A7'
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:56:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:63:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:69:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC_A0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:103:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:121:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: note: suggested alternative: 'ADC_A7'
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:56:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:63:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:69:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC_A0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:103:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:121:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: note: suggested alternative: 'ADC_A7'
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:56:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:63:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:69:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC_A0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:103:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:121:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: note: suggested alternative: 'ADC_A7'
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:56:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:63:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:69:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC_A0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:103:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:121:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: note: suggested alternative: 'ADC_A7'
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:11:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:56:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:61:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: note: suggested alternative: 'ADC_A7'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: note: suggested alternative: 'ADC'
ADCSRA |= (1 << ADEN); // set adc enable
^~~~
ADC
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:63:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:67:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: note: suggested alternative: 'ADC'
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^~~~
ADC
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:69:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:74:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: note: suggested alternative: 'ADC_A7'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~~
ADC_A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: note: suggested alternative: 'ADC_A2'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: note: suggested alternative: 'ADC_A1'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: note: suggested alternative: 'ADC_A0'
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^~~~~
ADC_A0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:103:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:108:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:121:5: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: error: 'cli' was not declared in this scope
cli();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:126:5: note: suggested alternative: 'Gclk'
cli();
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: note: suggested alternative: 'ADC_A7'
ADMUX &= ~(1<<ADLAR); // right adjustment
^~~~~
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerEnable(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:21: error: 'ADATE' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: error: 'ADCSRB' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: error: 'ADTS2' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: error: 'ADTS1' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:58: error: 'ADTS0' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerDisable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:177:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADATE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:177:23: error: 'ADATE' was not declared in this scope
ADCSRA &= ~ (1 << ADATE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_attachInterrupt(void (*)())':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:184:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:184:21: error: 'ADIE' was not declared in this scope
ADCSRA |= (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_detachInterrupt()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:190:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:190:23: error: 'ADIE' was not declared in this scope
ADCSRA &= ~ (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_startConvert()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:196:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADSC);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:196:21: error: 'ADSC' was not declared in this scope
ADCSRA |= (1 << ADSC);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'unsigned int ADC_read()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:201:12: error: 'ADC' was not declared in this scope
return ADC;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'uint8_t ADC_read8()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:205:12: error: 'ADCH' was not declared in this scope
return ADCH;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'boolean ADC_available()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:209:9: error: 'ADCSRA' was not declared in this scope
if (ADCSRA & (1 << ADSC)) { // if flag set - convert in process
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:209:24: error: 'ADSC' was not declared in this scope
if (ADCSRA & (1 << ADSC)) { // if flag set - convert in process
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'unsigned int ADC_readWhenAvailable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:218:12: error: 'ADCSRA' was not declared
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerEnable(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:21: error: 'ADATE' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: error: 'ADCSRB' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: error: 'ADTS2' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: error: 'ADTS1' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:58: error: 'ADTS0' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerDisable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:177:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADATE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:177:23: error: 'ADATE' was not declared in this scope
ADCSRA &= ~ (1 << ADATE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_attachInterrupt(void (*)())':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:184:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:184:21: error: 'ADIE' was not declared in this scope
ADCSRA |= (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_detachInterrupt()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:190:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:190:23: error: 'ADIE' was not declared in this scope
ADCSRA &= ~ (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_startConvert()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:196:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADSC);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:196:21: error: 'ADSC' was not declared in this scope
ADCSRA |= (1 << ADSC);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'unsigned int ADC_read()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:201:12: error: 'ADC' was not declared in this scope
return ADC;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'uint8_t ADC_read8()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:205:12: error: 'ADCH' was not declared in this scope
return ADCH;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'boolean ADC_available()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:209:9: error: 'ADCSRA' was not declared in this scope
if (ADCSRA & (1 << ADSC)) { // if flag set - convert in process
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:209:24: error: 'ADSC' was not declared in this scope
if (ADCSRA & (1 << ADSC)) { // if flag set - convert in process
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'unsigned int ADC_readWhenAvailable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:218:12: error: 'ADCSRA' was not declared
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerEnable(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:21: error: 'ADATE' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: error: 'ADCSRB' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: error: 'ADTS2' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: error: 'ADTS1' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:58: error: 'ADTS0' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerDisable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:177:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADATE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:177:23: error: 'ADATE' was not declared in this scope
ADCSRA &= ~ (1 << ADATE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_attachInterrupt(void (*)())':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:184:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:184:21: error: 'ADIE' was not declared in this scope
ADCSRA |= (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_detachInterrupt()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:190:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:190:23: error: 'ADIE' was not declared in this scope
ADCSRA &= ~ (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_startConvert()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:196:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADSC);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:196:21: error: 'ADSC' was not declared in this scope
ADCSRA |= (1 << ADSC);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'unsigned int ADC_read()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:201:12: error: 'ADC' was not declared in this scope
return ADC;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'uint8_t ADC_read8()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:205:12: error: 'ADCH' was not declared in this scope
return ADCH;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'boolean ADC_available()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:209:9: error: 'ADCSRA' was not declared in this scope
if (ADCSRA & (1 << ADSC)) { // if flag set - convert in process
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:209:24: error: 'ADSC' was not declared in this scope
if (ADCSRA & (1 << ADSC)) { // if flag set - convert in process
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'unsigned int ADC_readWhenAvailable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:218:12: error: 'ADCSRA' was not declared
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerEnable(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:21: error: 'ADATE' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: error: 'ADCSRB' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: error: 'ADTS2' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: error: 'ADTS1' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:58: error: 'ADTS0' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerDisable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:177:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADATE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:177:23: error: 'ADATE' was not declared in this scope
ADCSRA &= ~ (1 << ADATE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_attachInterrupt(void (*)())':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:184:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:184:21: error: 'ADIE' was not declared in this scope
ADCSRA |= (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_detachInterrupt()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:190:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:190:23: error: 'ADIE' was not declared in this scope
ADCSRA &= ~ (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_startConvert()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:196:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADSC);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:196:21: error: 'ADSC' was not declared in this scope
ADCSRA |= (1 << ADSC);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'unsigned int ADC_read()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:201:12: error: 'ADC' was not declared in this scope
return ADC;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'uint8_t ADC_read8()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:205:12: error: 'ADCH' was not declared in this scope
return ADCH;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'boolean ADC_available()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:209:9: error: 'ADCSRA' was not declared in this scope
if (ADCSRA & (1 << ADSC)) { // if flag set - convert in process
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:209:24: error: 'ADSC' was not declared in this scope
if (ADCSRA & (1 << ADSC)) { // if flag set - convert in process
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'unsigned int ADC_readWhenAvailable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:218:12: error: 'ADCSRA' was not declared
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerEnable(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:21: error: 'ADATE' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: error: 'ADCSRB' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: error: 'ADTS2' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: error: 'ADTS1' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:58: error: 'ADTS0' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerDisable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:177:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADATE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:177:23: error: 'ADATE' was not declared in this scope
ADCSRA &= ~ (1 << ADATE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_attachInterrupt(void (*)())':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:184:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:184:21: error: 'ADIE' was not declared in this scope
ADCSRA |= (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_detachInterrupt()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:190:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:190:23: error: 'ADIE' was not declared in this scope
ADCSRA &= ~ (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_startConvert()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:196:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADSC);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:196:21: error: 'ADSC' was not declared in this scope
ADCSRA |= (1 << ADSC);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'unsigned int ADC_read()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:201:12: error: 'ADC' was not declared in this scope
return ADC;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'uint8_t ADC_read8()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:205:12: error: 'ADCH' was not declared in this scope
return ADCH;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'boolean ADC_available()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:209:9: error: 'ADCSRA' was not declared in this scope
if (ADCSRA & (1 << ADSC)) { // if flag set - convert in process
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:209:24: error: 'ADSC' was not declared in this scope
if (ADCSRA & (1 << ADSC)) { // if flag set - convert in process
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'unsigned int ADC_readWhenAvailable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:218:12: error: 'ADCSRA' was not declared
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerEnable(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:21: error: 'ADATE' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: error: 'ADCSRB' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: error: 'ADTS2' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: error: 'ADTS1' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:58: error: 'ADTS0' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerDisable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:177:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADATE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:177:23: error: 'ADATE' was not declared in this scope
ADCSRA &= ~ (1 << ADATE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_attachInterrupt(void (*)())':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:184:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:184:21: error: 'ADIE' was not declared in this scope
ADCSRA |= (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_detachInterrupt()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:190:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:190:23: error: 'ADIE' was not declared in this scope
ADCSRA &= ~ (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_startConvert()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:196:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADSC);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:196:21: error: 'ADSC' was not declared in this scope
ADCSRA |= (1 << ADSC);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'unsigned int ADC_read()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:201:12: error: 'ADC' was not declared in this scope
return ADC;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'uint8_t ADC_read8()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:205:12: error: 'ADCH' was not declared in this scope
return ADCH;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'boolean ADC_available()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:209:9: error: 'ADCSRA' was not declared in this scope
if (ADCSRA & (1 << ADSC)) { // if flag set - convert in process
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:209:24: error: 'ADSC' was not declared in this scope
if (ADCSRA & (1 << ADSC)) { // if flag set - convert in process
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'unsigned int ADC_readWhenAvailable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:218:12: error: 'ADCSRA' was not declared
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerEnable(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:21: error: 'ADATE' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: error: 'ADCSRB' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: error: 'ADTS2' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: error: 'ADTS1' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:58: error: 'ADTS0' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerDisable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:177:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADATE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:177:23: error: 'ADATE' was not declared in this scope
ADCSRA &= ~ (1 << ADATE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_attachInterrupt(void (*)())':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:184:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:184:21: error: 'ADIE' was not declared in this scope
ADCSRA |= (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_detachInterrupt()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:190:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:190:23: error: 'ADIE' was not declared in this scope
ADCSRA &= ~ (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_startConvert()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:196:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADSC);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:196:21: error: 'ADSC' was not declared in this scope
ADCSRA |= (1 << ADSC);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'unsigned int ADC_read()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:201:12: error: 'ADC' was not declared in this scope
return ADC;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'uint8_t ADC_read8()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:205:12: error: 'ADCH' was not declared in this scope
return ADCH;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'boolean ADC_available()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:209:9: error: 'ADCSRA' was not declared in this scope
if (ADCSRA & (1 << ADSC)) { // if flag set - convert in process
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:209:24: error: 'ADSC' was not declared in this scope
if (ADCSRA & (1 << ADSC)) { // if flag set - convert in process
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'unsigned int ADC_readWhenAvailable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:218:12: error: 'ADCSRA' was not declared
Result: FAIL
WARNING: library directADC claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void setAnalogMux(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:27: error: 'MUX3' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:41: error: 'MUX2' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:55: error: 'MUX1' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:14:69: error: 'MUX0' was not declared in this scope
ADMUX &= ~ ((1 << MUX3) | (1 << MUX2) | (1 << MUX1) | (1 << MUX0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_enable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:62:21: error: 'ADEN' was not declared in this scope
ADCSRA |= (1 << ADEN); // set adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_disable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:68:23: error: 'ADEN' was not declared in this scope
ADCSRA &= ~ (1 << ADEN); // clear adc enable
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setPrescaler(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:9: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:27: error: 'ADPS2' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:42: error: 'ADPS1' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:77:57: error: 'ADPS0' was not declared in this scope
ADCSRA &= ~((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setReference(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:9: error: 'ADMUX' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:25: error: 'REFS1' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:111:40: error: 'REFS0' was not declared in this scope
ADMUX |= ((1 << REFS1) | (1 << REFS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_setResolution(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:9: error: 'ADMUX' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:130:23: error: 'ADLAR' was not declared in this scope
ADMUX &= ~(1<<ADLAR); // right adjustment
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerEnable(ADC_modes)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:142:21: error: 'ADATE' was not declared in this scope
ADCSRA |= (1 << ADATE); // autotrigger en
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:9: error: 'ADCSRB' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:28: error: 'ADTS2' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:43: error: 'ADTS1' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:145:58: error: 'ADTS0' was not declared in this scope
ADCSRB &= ~ ((1 << ADTS2) | (1 << ADTS1) | (1 << ADTS0));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_autoTriggerDisable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:177:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADATE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:177:23: error: 'ADATE' was not declared in this scope
ADCSRA &= ~ (1 << ADATE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_attachInterrupt(void (*)())':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:184:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:184:21: error: 'ADIE' was not declared in this scope
ADCSRA |= (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_detachInterrupt()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:190:5: error: 'ADCSRA' was not declared in this scope
ADCSRA &= ~ (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:190:23: error: 'ADIE' was not declared in this scope
ADCSRA &= ~ (1 << ADIE);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'void ADC_startConvert()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:196:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= (1 << ADSC);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:196:21: error: 'ADSC' was not declared in this scope
ADCSRA |= (1 << ADSC);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'unsigned int ADC_read()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:201:12: error: 'ADC' was not declared in this scope
return ADC;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'uint8_t ADC_read8()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:205:12: error: 'ADCH' was not declared in this scope
return ADCH;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'boolean ADC_available()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:209:9: error: 'ADCSRA' was not declared in this scope
if (ADCSRA & (1 << ADSC)) { // if flag set - convert in process
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:209:24: error: 'ADSC' was not declared in this scope
if (ADCSRA & (1 << ADSC)) { // if flag set - convert in process
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp: In function 'unsigned int ADC_readWhenAvailable()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/directADC/src/directADC.cpp:218:12: error: 'ADCSRA' was not declared