This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.1.0
More details
| Board | Claims compatibility | Inclusion |
|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes ⚠️ | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes ⚠️ | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes ⚠️ | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes ⚠️ | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes ⚠️ | FAIL |
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uStepper/src/uStepper.cpp: In member function 'float uStepperTemp::getTemp()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uStepper/src/uStepper.cpp:671:20: error: 'TEMP' was not declared in this scope
Vout = analogRead(TEMP)*0.0048828125; //0.0048828125 = 5V/1024
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uStepper/src/uStepper.cpp:671:20: note: suggested alternative: 'TSM'
Vout = analogRead(TEMP)*0.0048828125; //0.0048828125 = 5V/1024
^~~~
TSM
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uStepper/src/uStepper.cpp: In member function 'void uStepper::runContinous(bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uStepper/src/uStepper.cpp:890:25: error: 'DIR' was not declared in this scope
if(dir != digitalRead(DIR)) //If motor is currently running the opposite direction as desired
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uStepper/src/uStepper.cpp:890:25: note: suggested alternative: 'EIFR'
if(dir != digitalRead(DIR)) //If motor is currently running the opposite direction as desired
^~~
EIFR
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uStepper/src/uStepper.cpp: In member function 'void uStepper::moveSteps(int32_t, bool, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uStepper/src/uStepper.cpp:1004:25: error: 'DIR' was not declared in this scope
if(dir != digitalRead(DIR)) //If current direction is different from desired direction
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uStepper/src/uStepper.cpp:1004:25: note: suggested alternative: 'EIFR'
if(dir != digitalRead(DIR)) //If current direction is different from desired direction
^~~
EIFR
Multiple libraries were found for "SoftwareSerial.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/egoShieldTimeLapse/src/egoShieldTimeLapse.h:113:0,
from /tmp/arduino-testlib618240347/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uStepper/src/uStepper.h:203:2: error: #error !!This library only supports the ATmega328p MCU!!
#error !!This library only supports the ATmega328p MCU!!
^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/egoShieldTimeLapse/src/egoShieldTimeLapse.h:113:0,
from /tmp/arduino-testlib618240347/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uStepper/src/uStepper.h:207:10: fatal error: avr/io.h: No such file or directory
#include <avr/io.h>
^~~~~~~~~~
compilation terminated.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/egoShieldTimeLapse/src/egoShieldTimeLapse.h:113:0,
from /tmp/arduino-testlib618240347/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uStepper/src/uStepper.h:203:2: error: #error !!This library only supports the ATmega328p MCU!!
#error !!This library only supports the ATmega328p MCU!!
^~~~~
Multiple libraries were found for "SoftwareSerial.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SoftwareSerial
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/egoShieldTimeLapse/src/egoShieldTimeLapse.h:113:0,
from /tmp/arduino-testlib824322816/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uStepper/src/uStepper.h:203:2: error: #error !!This library only supports the ATmega328p MCU!!
#error !!This library only supports the ATmega328p MCU!!
^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/egoShieldTimeLapse/src/egoShieldTimeLapse.h:113:0,
from /tmp/arduino-testlib824322816/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uStepper/src/uStepper.h:207:10: fatal error: avr/io.h: No such file or directory
#include <avr/io.h>
^~~~~~~~~~
compilation terminated.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/egoShieldTimeLapse/src/egoShieldTimeLapse.h:113:0,
from /tmp/arduino-testlib618240347/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uStepper/src/uStepper.h:203:2: error: #error !!This library only supports the ATmega328p MCU!!
#error !!This library only supports the ATmega328p MCU!!
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/egoShieldTimeLapse/src/egoShieldTimeLapse.h:113:0,
from /tmp/arduino-testlib618240347/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uStepper/src/uStepper.h:207:20: fatal error: avr/io.h: No such file or directory
compilation terminated.