extEEPROM - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

extEEPROM

Version: 3.4.1
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	eepromReadWrite	eepromTest	eepromTest_Wire1
arduino:avr:uno 1.8.4	Yes	PASS	FAIL	PASS	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	PASS	PASS	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	FAIL	PASS	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	PASS	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	FAIL	PASS	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/eepromReadWrite

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino:25:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.begin(115200);
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino:25:3: note: suggested alternative: 'Serial'
   SerialUSB.begin(115200);
   ^~~~~~~~~
   Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino: In function 'void eprom_read_write(bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino:61:5: error: 'SerialUSB' was not declared in this scope
     SerialUSB.print(F("I2C Problem: "));
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino:61:5: note: suggested alternative: 'Serial'
     SerialUSB.print(F("I2C Problem: "));
     ^~~~~~~~~
     Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino: In function 'void parse(char)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino:84:7: error: 'SerialUSB' was not declared in this scope
       SerialUSB.print(F("Insert Address as 4 Hex chars (without '0x'):  "));
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino:84:7: note: suggested alternative: 'Serial'
       SerialUSB.print(F("Insert Address as 4 Hex chars (without '0x'):  "));
       ^~~~~~~~~
       Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino:194:7: error: 'SerialUSB' was not declared in this scope
   if (SerialUSB.available() > 0) {
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino:194:7: note: suggested alternative: 'Serial'
   if (SerialUSB.available() > 0) {
       ^~~~~~~~~
       Serial

examples/eepromTest

Result: PASS

Sketch uses 6934 bytes (21%) of program storage space. Maximum is 32256 bytes.
Global variables use 421 bytes (20%) of dynamic memory, leaving 1627 bytes for local variables. Maximum is 2048 bytes.

examples/eepromTest_Wire1

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino:22:11: error: 'SerialUSB' was not declared in this scope
   while (!SerialUSB) {}
           ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino:22:11: note: suggested alternative: 'Serial'
   while (!SerialUSB) {}
           ^~~~~~~~~
           Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino:36:54: error: 'WIRE_INTERFACES_COUNT' was not declared in this scope
       if ((I2Cchannel > '0') && (I2Cchannel < ('0' + WIRE_INTERFACES_COUNT))) {
                                                      ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino:49:54: error: 'Wire1' was not declared in this scope
           eepStatus = eep.begin(eep.twiClock400kHz, &Wire1);   //go fast!
                                                      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino:49:54: note: suggested alternative: 'Wire'
           eepStatus = eep.begin(eep.twiClock400kHz, &Wire1);   //go fast!
                                                      ^~~~~
                                                      Wire

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

examples/eepromReadWrite

Result: PASS

Sketch uses 84730 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 45272 bytes (16%) of dynamic memory, leaving 225064 bytes for local variables. Maximum is 270336 bytes.

examples/eepromTest

Result: PASS

Sketch uses 83552 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44244 bytes (16%) of dynamic memory, leaving 226092 bytes for local variables. Maximum is 270336 bytes.

examples/eepromTest_Wire1

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino:36:54: error: 'WIRE_INTERFACES_COUNT' was not declared in this scope
       if ((I2Cchannel > '0') && (I2Cchannel < ('0' + WIRE_INTERFACES_COUNT))) {
                                                      ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino:49:54: error: 'Wire1' was not declared in this scope
           eepStatus = eep.begin(eep.twiClock400kHz, &Wire1);   //go fast!
                                                      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino:49:54: note: suggested alternative: 'Wire'
           eepStatus = eep.begin(eep.twiClock400kHz, &Wire1);   //go fast!
                                                      ^~~~~
                                                      Wire

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.

examples/eepromReadWrite

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino:25:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.begin(115200);
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino:25:3: note: suggested alternative: 'Serial1'
   SerialUSB.begin(115200);
   ^~~~~~~~~
   Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino: In function 'void eprom_read_write(bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino:61:5: error: 'SerialUSB' was not declared in this scope
     SerialUSB.print(F("I2C Problem: "));
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino:61:5: note: suggested alternative: 'Serial1'
     SerialUSB.print(F("I2C Problem: "));
     ^~~~~~~~~
     Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino: In function 'void parse(char)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino:84:7: error: 'SerialUSB' was not declared in this scope
       SerialUSB.print(F("Insert Address as 4 Hex chars (without '0x'):  "));
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino:84:7: note: suggested alternative: 'Serial1'
       SerialUSB.print(F("Insert Address as 4 Hex chars (without '0x'):  "));
       ^~~~~~~~~
       Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino:194:7: error: 'SerialUSB' was not declared in this scope
   if (SerialUSB.available() > 0) {
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino:194:7: note: suggested alternative: 'Serial1'
   if (SerialUSB.available() > 0) {
       ^~~~~~~~~
       Serial1

examples/eepromTest

Result: PASS

Sketch uses 7756 bytes (15%) of program storage space. Maximum is 49152 bytes.
Global variables use 499 bytes (8%) of dynamic memory, leaving 5645 bytes for local variables. Maximum is 6144 bytes.

examples/eepromTest_Wire1

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino:22:11: error: 'SerialUSB' was not declared in this scope
   while (!SerialUSB) {}
           ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino:22:11: note: suggested alternative: 'Serial1'
   while (!SerialUSB) {}
           ^~~~~~~~~
           Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino:36:54: error: 'WIRE_INTERFACES_COUNT' was not declared in this scope
       if ((I2Cchannel > '0') && (I2Cchannel < ('0' + WIRE_INTERFACES_COUNT))) {
                                                      ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino:36:54: note: suggested alternative: 'SPI_INTERFACES_COUNT'
       if ((I2Cchannel > '0') && (I2Cchannel < ('0' + WIRE_INTERFACES_COUNT))) {
                                                      ^~~~~~~~~~~~~~~~~~~~~
                                                      SPI_INTERFACES_COUNT
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino:49:54: error: 'Wire1' was not declared in this scope
           eepStatus = eep.begin(eep.twiClock400kHz, &Wire1);   //go fast!
                                                      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino:49:54: note: suggested alternative: 'Wire'
           eepStatus = eep.begin(eep.twiClock400kHz, &Wire1);   //go fast!
                                                      ^~~~~
                                                      Wire

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.

examples/eepromReadWrite

Result: PASS

Sketch uses 17984 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 4984 bytes (15%) of dynamic memory, leaving 27784 bytes for local variables. Maximum is 32768 bytes.

examples/eepromTest

Result: PASS

Sketch uses 15612 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3588 bytes (10%) of dynamic memory, leaving 29180 bytes for local variables. Maximum is 32768 bytes.

examples/eepromTest_Wire1

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino:49:54: error: 'Wire1' was not declared in this scope
           eepStatus = eep.begin(eep.twiClock400kHz, &Wire1);   //go fast!
                                                      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino:49:54: note: suggested alternative: 'Wire'
           eepStatus = eep.begin(eep.twiClock400kHz, &Wire1);   //go fast!
                                                      ^~~~~
                                                      Wire

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 202538 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/extEEPROM.h:62:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/extEEPROM.cpp:58:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'byte extEEPROM::read(long unsigned int, byte*, unsigned int)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:103:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
     uint8_t requestFrom(int address, int size);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:101:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t address, uint8_t size);
             ^

examples/eepromReadWrite

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino:25:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.begin(115200);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino: In function 'void eprom_read_write(bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino:61:5: error: 'SerialUSB' was not declared in this scope
     SerialUSB.print(F("I2C Problem: "));
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino: In function 'void parse(char)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino:84:7: error: 'SerialUSB' was not declared in this scope
       SerialUSB.print(F("Insert Address as 4 Hex chars (without '0x'):  "));
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromReadWrite/eepromReadWrite.ino:194:7: error: 'SerialUSB' was not declared in this scope
   if (SerialUSB.available() > 0) {
       ^

examples/eepromTest

Result: PASS

Sketch uses 215042 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14152 bytes (4%) of dynamic memory, leaving 313528 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/extEEPROM.h:62:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/extEEPROM.cpp:58:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'byte extEEPROM::read(long unsigned int, byte*, unsigned int)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:103:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
     uint8_t requestFrom(int address, int size);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:101:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t address, uint8_t size);
             ^

examples/eepromTest_Wire1

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino:22:11: error: 'SerialUSB' was not declared in this scope
   while (!SerialUSB) {}
           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/extEEPROM/examples/eepromTest_Wire1/eepromTest_Wire1.ino:36:54: error: 'WIRE_INTERFACES_COUNT' was not declared in this scope
       if ((I2Cchannel > '0') && (I2Cchannel < ('0' + WIRE_INTERFACES_COUNT))) {
                                                      ^