high-side-switch-ino - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

high-side-switch-ino

Version: 1.0.0
More details

Compatibility matrix

Board Claims compatibility Inclusion 
BTS5001x-hss-single-ch
 
BTS700x-hss-advanced
 
BTS700x-hss-multiple-ch
 
BTT60xx-hss-advanced
 
BTT60xx-hss-multiple-ch
 
BTS5001x-button-test
 
BTS700x-button-test
 
BTS700x-hss-single-ch
 
BTT60xx-hss-single-ch
 
BTS5001x-hss-advanced
arduino:avr:uno
1.8.4 		Yes PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS
arduino:mbed_nano:nanorp2040connect
2.7.2 		Yes ⚠️ FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL
arduino:megaavr:nona4809
1.8.7 		Yes ⚠️ FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL
arduino:samd:mkrwifi1010
1.8.12 		Yes ⚠️ FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL
esp32:esp32:d1_mini32
1.0.6 		Yes ⚠️ FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created. 

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/BTS5001x-button-test

Result: PASS 

Sketch uses 7958 bytes (24%) of program storage space. Maximum is 32256 bytes.
Global variables use 464 bytes (22%) of dynamic memory, leaving 1584 bytes for local variables. Maximum is 2048 bytes.

examples/BTS5001x-hss-advanced

Result: PASS 

Sketch uses 8384 bytes (25%) of program storage space. Maximum is 32256 bytes.
Global variables use 768 bytes (37%) of dynamic memory, leaving 1280 bytes for local variables. Maximum is 2048 bytes.

examples/BTS5001x-hss-single-ch

Result: PASS 

Sketch uses 7744 bytes (24%) of program storage space. Maximum is 32256 bytes.
Global variables use 534 bytes (26%) of dynamic memory, leaving 1514 bytes for local variables. Maximum is 2048 bytes.

examples/BTS700x-button-test

Result: PASS 

Sketch uses 10224 bytes (31%) of program storage space. Maximum is 32256 bytes.
Global variables use 482 bytes (23%) of dynamic memory, leaving 1566 bytes for local variables. Maximum is 2048 bytes.

examples/BTS700x-hss-advanced

Result: PASS 

Sketch uses 11426 bytes (35%) of program storage space. Maximum is 32256 bytes.
Global variables use 1010 bytes (49%) of dynamic memory, leaving 1038 bytes for local variables. Maximum is 2048 bytes.

examples/BTS700x-hss-multiple-ch

Result: PASS 

Sketch uses 9640 bytes (29%) of program storage space. Maximum is 32256 bytes.
Global variables use 514 bytes (25%) of dynamic memory, leaving 1534 bytes for local variables. Maximum is 2048 bytes.

examples/BTS700x-hss-single-ch

Result: PASS 

Sketch uses 10020 bytes (31%) of program storage space. Maximum is 32256 bytes.
Global variables use 562 bytes (27%) of dynamic memory, leaving 1486 bytes for local variables. Maximum is 2048 bytes.

examples/BTT60xx-hss-advanced

Result: PASS 

Sketch uses 9236 bytes (28%) of program storage space. Maximum is 32256 bytes.
Global variables use 1200 bytes (58%) of dynamic memory, leaving 848 bytes for local variables. Maximum is 2048 bytes.

examples/BTT60xx-hss-multiple-ch

Result: PASS 

Sketch uses 7598 bytes (23%) of program storage space. Maximum is 32256 bytes.
Global variables use 508 bytes (24%) of dynamic memory, leaving 1540 bytes for local variables. Maximum is 2048 bytes.

examples/BTT60xx-hss-single-ch

Result: PASS 

Sketch uses 8072 bytes (25%) of program storage space. Maximum is 32256 bytes.
Global variables use 554 bytes (27%) of dynamic memory, leaving 1494 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL
This library has no main header file so an empty one was created. 



					
					
examples/BTS5001x-button-test

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-platf.cpp:89:2: error: #error "You did not define a supported platform! Please make sure you're defining a custom default platform in hss-shield-platf.cpp, or use the non-default shield constructor."
 #error "You did not define a supported platform! \
  ^~~~~



					
					
examples/BTS5001x-hss-advanced

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-platf.cpp:89:2: error: #error "You did not define a supported platform! Please make sure you're defining a custom default platform in hss-shield-platf.cpp, or use the non-default shield constructor."
 #error "You did not define a supported platform! \
  ^~~~~



					
					
examples/BTS5001x-hss-single-ch

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-platf.cpp:89:2: error: #error "You did not define a supported platform! Please make sure you're defining a custom default platform in hss-shield-platf.cpp, or use the non-default shield constructor."
 #error "You did not define a supported platform! \
  ^~~~~



					
					
examples/BTS700x-button-test

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-platf.cpp:89:2: error: #error "You did not define a supported platform! Please make sure you're defining a custom default platform in hss-shield-platf.cpp, or use the non-default shield constructor."
 #error "You did not define a supported platform! \
  ^~~~~



					
					
examples/BTS700x-hss-advanced

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-platf.cpp:89:2: error: #error "You did not define a supported platform! Please make sure you're defining a custom default platform in hss-shield-platf.cpp, or use the non-default shield constructor."
 #error "You did not define a supported platform! \
  ^~~~~



					
					
examples/BTS700x-hss-multiple-ch

					

						Result: FAIL
					

					

					
					
examples/BTS700x-hss-single-ch

					

						Result: FAIL
					

					

					
					
examples/BTT60xx-hss-advanced

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-platf.cpp:89:2: error: #error "You did not define a supported platform! Please make sure you're defining a custom default platform in hss-shield-platf.cpp, or use the non-default shield constructor."
 #error "You did not define a supported platform! \
  ^~~~~



					
					
examples/BTT60xx-hss-multiple-ch

					

						Result: FAIL
					

					

					
					
examples/BTT60xx-hss-single-ch

					

						Result: FAIL
					

					

					
				
				
arduino:megaavr:nona4809 @ 1.8.7

				
Inclusion

				

					Result: FAIL
					
					
This library has no main header file so an empty one was created.
					
				

				


					
					
examples/BTS5001x-button-test

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-platf.cpp:89:2: error: #error "You did not define a supported platform! Please make sure you're defining a custom default platform in hss-shield-platf.cpp, or use the non-default shield constructor."
 #error "You did not define a supported platform! \
  ^~~~~



					
					
examples/BTS5001x-hss-advanced

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-platf.cpp:89:2: error: #error "You did not define a supported platform! Please make sure you're defining a custom default platform in hss-shield-platf.cpp, or use the non-default shield constructor."
 #error "You did not define a supported platform! \
  ^~~~~



					
					
examples/BTS5001x-hss-single-ch

					

						Result: FAIL
					

					

					
					
examples/BTS700x-button-test

					

						Result: FAIL
					

					

					
					
examples/BTS700x-hss-advanced

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-platf.cpp:89:2: error: #error "You did not define a supported platform! Please make sure you're defining a custom default platform in hss-shield-platf.cpp, or use the non-default shield constructor."
 #error "You did not define a supported platform! \
  ^~~~~



					
					
examples/BTS700x-hss-multiple-ch

					

						Result: FAIL
					

					

					
					
examples/BTS700x-hss-single-ch

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-platf.cpp:89:2: error: #error "You did not define a supported platform! Please make sure you're defining a custom default platform in hss-shield-platf.cpp, or use the non-default shield constructor."
 #error "You did not define a supported platform! \
  ^~~~~



					
					
examples/BTT60xx-hss-advanced

					

						Result: FAIL
					

					

					
					
examples/BTT60xx-hss-multiple-ch

					

						Result: FAIL
					

					

					
					
examples/BTT60xx-hss-single-ch

					

						Result: FAIL
					

					

					
				
				
arduino:samd:mkrwifi1010 @ 1.8.12

				
Inclusion

				

					Result: FAIL
					
					
This library has no main header file so an empty one was created.
					
				

				
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-platf.cpp:89:2: error: #error "You did not define a supported platform! Please make sure you're defining a custom default platform in hss-shield-platf.cpp, or use the non-default shield constructor."
 #error "You did not define a supported platform! \
  ^~~~~




					
					
examples/BTS5001x-button-test

					

						Result: FAIL
					

					

					
					
examples/BTS5001x-hss-advanced

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-platf.cpp:89:2: error: #error "You did not define a supported platform! Please make sure you're defining a custom default platform in hss-shield-platf.cpp, or use the non-default shield constructor."
 #error "You did not define a supported platform! \
  ^~~~~



					
					
examples/BTS5001x-hss-single-ch

					

						Result: FAIL
					

					

					
					
examples/BTS700x-button-test

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-platf.cpp:89:2: error: #error "You did not define a supported platform! Please make sure you're defining a custom default platform in hss-shield-platf.cpp, or use the non-default shield constructor."
 #error "You did not define a supported platform! \
  ^~~~~



					
					
examples/BTS700x-hss-advanced

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-platf.cpp:89:2: error: #error "You did not define a supported platform! Please make sure you're defining a custom default platform in hss-shield-platf.cpp, or use the non-default shield constructor."
 #error "You did not define a supported platform! \
  ^~~~~



					
					
examples/BTS700x-hss-multiple-ch

					

						Result: FAIL
					

					

					
					
examples/BTS700x-hss-single-ch

					

						Result: FAIL
					

					

					
					
examples/BTT60xx-hss-advanced

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-platf.cpp:89:2: error: #error "You did not define a supported platform! Please make sure you're defining a custom default platform in hss-shield-platf.cpp, or use the non-default shield constructor."
 #error "You did not define a supported platform! \
  ^~~~~



					
					
examples/BTT60xx-hss-multiple-ch

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-platf.cpp:89:2: error: #error "You did not define a supported platform! Please make sure you're defining a custom default platform in hss-shield-platf.cpp, or use the non-default shield constructor."
 #error "You did not define a supported platform! \
  ^~~~~



					
					
examples/BTT60xx-hss-single-ch

					

						Result: FAIL
					

					

					
				
				
esp32:esp32:d1_mini32 @ 1.0.6

				
Inclusion

				

					Result: FAIL
					
					
This library has no main header file so an empty one was created.
					
				

				
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-platf.cpp:89:2: error: #error "You did not define a supported platform! Please make sure you're defining a custom default platform in hss-shield-platf.cpp, or use the non-default shield constructor."
 #error "You did not define a supported platform! \
  ^




					
					
examples/BTS5001x-button-test

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS5001x-button-test/BTS5001x-button-test.ino:22:15: error: reference to 'OK' is ambiguous
 Error_t err = OK;
               ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-A1F9D61B5C7D3C3BDCC0E1A12DAF5DB8/sketch/BTS5001x-button-test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:630:5: note: candidates are: STATUS OK
     OK = 0,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss.hpp:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-arduino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-bts5001x-ino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS5001x-button-test/BTS5001x-button-test.ino:14:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-types.hpp:25:3: note:                 hss::Error_t OK
   OK                =  0,   /**< No error */
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS5001x-button-test/BTS5001x-button-test.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS5001x-button-test/BTS5001x-button-test.ino:33:8: error: reference to 'OK' is ambiguous
     if(OK!=err)
        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-A1F9D61B5C7D3C3BDCC0E1A12DAF5DB8/sketch/BTS5001x-button-test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:630:5: note: candidates are: STATUS OK
     OK = 0,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss.hpp:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-arduino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-bts5001x-ino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS5001x-button-test/BTS5001x-button-test.ino:14:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-types.hpp:25:3: note:                 hss::Error_t OK
   OK                =  0,   /**< No error */
   ^



					
					
examples/BTS5001x-hss-advanced

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS5001x-hss-advanced/BTS5001x-hss-advanced.ino:28:15: error: reference to 'OK' is ambiguous
 Error_t err = OK;
               ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-C940A7B5745055724CA6EDAE4014CFE1/sketch/BTS5001x-hss-advanced.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:630:5: note: candidates are: STATUS OK
     OK = 0,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss.hpp:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-arduino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-bts5001x-ino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS5001x-hss-advanced/BTS5001x-hss-advanced.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-types.hpp:25:3: note:                 hss::Error_t OK
   OK                =  0,   /**< No error */
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS5001x-hss-advanced/BTS5001x-hss-advanced.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS5001x-hss-advanced/BTS5001x-hss-advanced.ino:38:8: error: reference to 'OK' is ambiguous
     if(OK!=err)
        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-C940A7B5745055724CA6EDAE4014CFE1/sketch/BTS5001x-hss-advanced.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:630:5: note: candidates are: STATUS OK
     OK = 0,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss.hpp:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-arduino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-bts5001x-ino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS5001x-hss-advanced/BTS5001x-hss-advanced.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-types.hpp:25:3: note:                 hss::Error_t OK
   OK                =  0,   /**< No error */
   ^



					
					
examples/BTS5001x-hss-single-ch

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS5001x-hss-single-ch/BTS5001x-hss-single-ch.ino:24:15: error: reference to 'OK' is ambiguous
 Error_t err = OK;
               ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-EB4FEB02954BBBD26573E1B446F38776/sketch/BTS5001x-hss-single-ch.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:630:5: note: candidates are: STATUS OK
     OK = 0,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss.hpp:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-arduino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-bts5001x-ino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS5001x-hss-single-ch/BTS5001x-hss-single-ch.ino:16:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-types.hpp:25:3: note:                 hss::Error_t OK
   OK                =  0,   /**< No error */
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS5001x-hss-single-ch/BTS5001x-hss-single-ch.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS5001x-hss-single-ch/BTS5001x-hss-single-ch.ino:34:8: error: reference to 'OK' is ambiguous
     if(OK!=err)
        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-EB4FEB02954BBBD26573E1B446F38776/sketch/BTS5001x-hss-single-ch.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:630:5: note: candidates are: STATUS OK
     OK = 0,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss.hpp:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-arduino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-bts5001x-ino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS5001x-hss-single-ch/BTS5001x-hss-single-ch.ino:16:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-types.hpp:25:3: note:                 hss::Error_t OK
   OK                =  0,   /**< No error */
   ^



					
					
examples/BTS700x-button-test

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS700x-button-test/BTS700x-button-test.ino:42:15: error: reference to 'OK' is ambiguous
 Error_t err = OK;
               ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-F3593B6577B987FB2DF91D3C75A34EB1/sketch/BTS700x-button-test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:630:5: note: candidates are: STATUS OK
     OK = 0,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss.hpp:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-arduino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-bts700x-ino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS700x-button-test/BTS700x-button-test.ino:31:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-types.hpp:25:3: note:                 hss::Error_t OK
   OK                =  0,   /**< No error */
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS700x-button-test/BTS700x-button-test.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS700x-button-test/BTS700x-button-test.ino:53:8: error: reference to 'OK' is ambiguous
     if(OK!=err)
        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-F3593B6577B987FB2DF91D3C75A34EB1/sketch/BTS700x-button-test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:630:5: note: candidates are: STATUS OK
     OK = 0,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss.hpp:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-arduino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-bts700x-ino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS700x-button-test/BTS700x-button-test.ino:31:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-types.hpp:25:3: note:                 hss::Error_t OK
   OK                =  0,   /**< No error */
   ^



					
					
examples/BTS700x-hss-advanced

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS700x-hss-advanced/BTS700x-hss-advanced.ino:37:15: error: reference to 'OK' is ambiguous
 Error_t err = OK;
               ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-8134CE05799A2C896B4466B51990B05D/sketch/BTS700x-hss-advanced.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:630:5: note: candidates are: STATUS OK
     OK = 0,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss.hpp:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-arduino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-bts700x-ino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS700x-hss-advanced/BTS700x-hss-advanced.ino:29:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-types.hpp:25:3: note:                 hss::Error_t OK
   OK                =  0,   /**< No error */
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS700x-hss-advanced/BTS700x-hss-advanced.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS700x-hss-advanced/BTS700x-hss-advanced.ino:47:8: error: reference to 'OK' is ambiguous
     if(OK!=err)
        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-8134CE05799A2C896B4466B51990B05D/sketch/BTS700x-hss-advanced.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:630:5: note: candidates are: STATUS OK
     OK = 0,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss.hpp:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-arduino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-bts700x-ino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS700x-hss-advanced/BTS700x-hss-advanced.ino:29:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-types.hpp:25:3: note:                 hss::Error_t OK
   OK                =  0,   /**< No error */
   ^



					
					
examples/BTS700x-hss-multiple-ch

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS700x-hss-multiple-ch/BTS700x-hss-multiple-ch.ino:26:15: error: reference to 'OK' is ambiguous
 Error_t err = OK;
               ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-C13C2A703E4B0442562E3685B0372DBE/sketch/BTS700x-hss-multiple-ch.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:630:5: note: candidates are: STATUS OK
     OK = 0,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss.hpp:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-arduino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-bts700x-ino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS700x-hss-multiple-ch/BTS700x-hss-multiple-ch.ino:15:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-types.hpp:25:3: note:                 hss::Error_t OK
   OK                =  0,   /**< No error */
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS700x-hss-multiple-ch/BTS700x-hss-multiple-ch.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS700x-hss-multiple-ch/BTS700x-hss-multiple-ch.ino:36:8: error: reference to 'OK' is ambiguous
     if(OK!=err)
        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-C13C2A703E4B0442562E3685B0372DBE/sketch/BTS700x-hss-multiple-ch.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:630:5: note: candidates are: STATUS OK
     OK = 0,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss.hpp:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-arduino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-bts700x-ino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS700x-hss-multiple-ch/BTS700x-hss-multiple-ch.ino:15:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-types.hpp:25:3: note:                 hss::Error_t OK
   OK                =  0,   /**< No error */
   ^



					
					
examples/BTS700x-hss-single-ch

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS700x-hss-single-ch/BTS700x-hss-single-ch.ino:26:15: error: reference to 'OK' is ambiguous
 Error_t err = OK;
               ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-4DC8ADD78E040B24B97A6A492BCFBD06/sketch/BTS700x-hss-single-ch.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:630:5: note: candidates are: STATUS OK
     OK = 0,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss.hpp:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-arduino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-bts700x-ino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS700x-hss-single-ch/BTS700x-hss-single-ch.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-types.hpp:25:3: note:                 hss::Error_t OK
   OK                =  0,   /**< No error */
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS700x-hss-single-ch/BTS700x-hss-single-ch.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS700x-hss-single-ch/BTS700x-hss-single-ch.ino:39:8: error: reference to 'OK' is ambiguous
     if(OK!=err)
        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-4DC8ADD78E040B24B97A6A492BCFBD06/sketch/BTS700x-hss-single-ch.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:630:5: note: candidates are: STATUS OK
     OK = 0,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss.hpp:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-arduino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-bts700x-ino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTS700x-hss-single-ch/BTS700x-hss-single-ch.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-types.hpp:25:3: note:                 hss::Error_t OK
   OK                =  0,   /**< No error */
   ^



					
					
examples/BTT60xx-hss-advanced

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTT60xx-hss-advanced/BTT60xx-hss-advanced.ino:37:15: error: reference to 'OK' is ambiguous
 Error_t err = OK;
               ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-5AAD644BBD59AD55AAD3362507EA7A11/sketch/BTT60xx-hss-advanced.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:630:5: note: candidates are: STATUS OK
     OK = 0,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss.hpp:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-arduino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-btt60xx-ino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTT60xx-hss-advanced/BTT60xx-hss-advanced.ino:31:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-types.hpp:25:3: note:                 hss::Error_t OK
   OK                =  0,   /**< No error */
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTT60xx-hss-advanced/BTT60xx-hss-advanced.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTT60xx-hss-advanced/BTT60xx-hss-advanced.ino:47:8: error: reference to 'OK' is ambiguous
     if(OK!=err)
        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-5AAD644BBD59AD55AAD3362507EA7A11/sketch/BTT60xx-hss-advanced.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:630:5: note: candidates are: STATUS OK
     OK = 0,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss.hpp:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-arduino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-btt60xx-ino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTT60xx-hss-advanced/BTT60xx-hss-advanced.ino:31:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-types.hpp:25:3: note:                 hss::Error_t OK
   OK                =  0,   /**< No error */
   ^



					
					
examples/BTT60xx-hss-multiple-ch

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTT60xx-hss-multiple-ch/BTT60xx-hss-multiple-ch.ino:25:15: error: reference to 'OK' is ambiguous
 Error_t err = OK;
               ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-2B23C38B6CAA2830469A07160FCAA038/sketch/BTT60xx-hss-multiple-ch.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:630:5: note: candidates are: STATUS OK
     OK = 0,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss.hpp:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-arduino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-btt60xx-ino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTT60xx-hss-multiple-ch/BTT60xx-hss-multiple-ch.ino:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-types.hpp:25:3: note:                 hss::Error_t OK
   OK                =  0,   /**< No error */
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTT60xx-hss-multiple-ch/BTT60xx-hss-multiple-ch.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTT60xx-hss-multiple-ch/BTT60xx-hss-multiple-ch.ino:45:8: error: reference to 'OK' is ambiguous
     if(OK!=err)
        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-2B23C38B6CAA2830469A07160FCAA038/sketch/BTT60xx-hss-multiple-ch.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:630:5: note: candidates are: STATUS OK
     OK = 0,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss.hpp:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-arduino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-btt60xx-ino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTT60xx-hss-multiple-ch/BTT60xx-hss-multiple-ch.ino:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-types.hpp:25:3: note:                 hss::Error_t OK
   OK                =  0,   /**< No error */
   ^



					
					
examples/BTT60xx-hss-single-ch

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTT60xx-hss-single-ch/BTT60xx-hss-single-ch.ino:26:15: error: reference to 'OK' is ambiguous
 Error_t err = OK;
               ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-669973172886AA180A63CD5431D78FA1/sketch/BTT60xx-hss-single-ch.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:630:5: note: candidates are: STATUS OK
     OK = 0,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss.hpp:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-arduino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-btt60xx-ino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTT60xx-hss-single-ch/BTT60xx-hss-single-ch.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-types.hpp:25:3: note:                 hss::Error_t OK
   OK                =  0,   /**< No error */
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTT60xx-hss-single-ch/BTT60xx-hss-single-ch.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTT60xx-hss-single-ch/BTT60xx-hss-single-ch.ino:46:8: error: reference to 'OK' is ambiguous
     if(OK!=err)
        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-669973172886AA180A63CD5431D78FA1/sketch/BTT60xx-hss-single-ch.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:630:5: note: candidates are: STATUS OK
     OK = 0,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss.hpp:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-arduino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-shield-btt60xx-ino.hpp:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/examples/BTT60xx-hss-single-ch/BTT60xx-hss-single-ch.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/high-side-switch-ino/src/hss-types.hpp:25:3: note:                 hss::Error_t OK
   OK                =  0,   /**< No error */
   ^