iBotX - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

iBotX

Compatibility matrix

Board	Claims compatibility	Inclusion	5_IR_sensor	6_Motor	7_Line_follower	8_Ultrasonic	9_Servo	1_Laser	2_Switch	3_Switch_select	4_Serial
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	No	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	No	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 1390 bytes (4%) of program storage space. Maximum is 32256 bytes.
Global variables use 50 bytes (2%) of dynamic memory, leaving 1998 bytes for local variables. Maximum is 2048 bytes.

examples/1_Laser

Result: PASS

Sketch uses 2102 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 50 bytes (2%) of dynamic memory, leaving 1998 bytes for local variables. Maximum is 2048 bytes.

examples/2_Switch

Result: PASS

Sketch uses 2188 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 50 bytes (2%) of dynamic memory, leaving 1998 bytes for local variables. Maximum is 2048 bytes.

examples/3_Switch_select

Result: PASS

Sketch uses 2376 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 52 bytes (2%) of dynamic memory, leaving 1996 bytes for local variables. Maximum is 2048 bytes.

examples/4_Serial

Result: PASS

Sketch uses 3614 bytes (11%) of program storage space. Maximum is 32256 bytes.
Global variables use 287 bytes (14%) of dynamic memory, leaving 1761 bytes for local variables. Maximum is 2048 bytes.

examples/5_IR_sensor

Result: PASS

Sketch uses 3572 bytes (11%) of program storage space. Maximum is 32256 bytes.
Global variables use 231 bytes (11%) of dynamic memory, leaving 1817 bytes for local variables. Maximum is 2048 bytes.

examples/6_Motor

Result: PASS

Sketch uses 2482 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 50 bytes (2%) of dynamic memory, leaving 1998 bytes for local variables. Maximum is 2048 bytes.

examples/7_Line_follower

Result: PASS

Sketch uses 2352 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 52 bytes (2%) of dynamic memory, leaving 1996 bytes for local variables. Maximum is 2048 bytes.

examples/8_Ultrasonic

Result: PASS

Sketch uses 4382 bytes (13%) of program storage space. Maximum is 32256 bytes.
Global variables use 247 bytes (12%) of dynamic memory, leaving 1801 bytes for local variables. Maximum is 2048 bytes.

examples/9_Servo

Result: PASS

Sketch uses 5030 bytes (15%) of program storage space. Maximum is 32256 bytes.
Global variables use 247 bytes (12%) of dynamic memory, leaving 1801 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /tmp/arduino-testlib1022429920/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: note: suggested alternative: 'TIMER'
   TIMSK2 |= 0b00000011;
   ^~~~~~
   TIMER
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive

examples/1_Laser

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/1_Laser/1_Laser.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: note: suggested alternative: 'TIMER'
   TIMSK2 |= 0b00000011;
   ^~~~~~
   TIMER
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32

examples/2_Switch

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/2_Switch/2_Switch.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: note: suggested alternative: 'TIMER'
   TIMSK2 |= 0b00000011;
   ^~~~~~
   TIMER
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive

examples/3_Switch_select

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/3_Switch_select/3_Switch_select.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: note: suggested alternative: 'TIMER'
   TIMSK2 |= 0b00000011;
   ^~~~~~
   TIMER
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/4_Serial

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/4_Serial/4_Serial.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: note: suggested alternative: 'TIMER'
   TIMSK2 |= 0b00000011;
   ^~~~~~
   TIMER
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32

examples/5_IR_sensor

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/5_IR_sensor/5_IR_sensor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: note: suggested alternative: 'TIMER'
   TIMSK2 |= 0b00000011;
   ^~~~~~
   TIMER
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32

examples/6_Motor

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/6_Motor/6_Motor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: note: suggested alternative: 'TIMER'
   TIMSK2 |= 0b00000011;
   ^~~~~~
   TIMER
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive

examples/7_Line_follower

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/7_Line_follower/7_Line_follower.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: note: suggested alternative: 'TIMER'
   TIMSK2 |= 0b00000011;
   ^~~~~~
   TIMER
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32

examples/8_Ultrasonic

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/8_Ultrasonic/8_Ultrasonic.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: note: suggested alternative: 'TIMER'
   TIMSK2 |= 0b00000011;
   ^~~~~~
   TIMER
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart

examples/9_Servo

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/9_Servo/9_Servo.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: note: suggested alternative: 'TIMER'
   TIMSK2 |= 0b00000011;
   ^~~~~~
   TIMER
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /tmp/arduino-testlib1022429920/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: note: suggested alternative: 'TCB2'
   TCCR2A |= 0b00000011;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: note: suggested alternative: 'TCB2'
   TCCR2B |= 0b00000100;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: note: suggested alternative: 'TIMERB2'
   TIMSK2 |= 0b00000011;
   ^~~~~~
   TIMERB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/1_Laser

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/1_Laser/1_Laser.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: note: suggested alternative: 'TCB2'
   TCCR2A |= 0b00000011;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: note: suggested alternative: 'TCB2'
   TCCR2B |= 0b00000100;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: note: suggested alternative: 'TIMERB2'
   TIMSK2 |= 0b00000011;
   ^~~~~~
   TIMERB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo

examples/2_Switch

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/2_Switch/2_Switch.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: note: suggested alternative: 'TCB2'
   TCCR2A |= 0b00000011;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: note: suggested alternative: 'TCB2'
   TCCR2B |= 0b00000100;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: note: suggested alternative: 'TIMERB2'
   TIMSK2 |= 0b00000011;
   ^~~~~~
   TIMERB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart

examples/3_Switch_select

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/3_Switch_select/3_Switch_select.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: note: suggested alternative: 'TCB2'
   TCCR2A |= 0b00000011;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: note: suggested alternative: 'TCB2'
   TCCR2B |= 0b00000100;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: note: suggested alternative: 'TIMERB2'
   TIMSK2 |= 0b00000011;
   ^~~~~~
   TIMERB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart

examples/4_Serial

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/4_Serial/4_Serial.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: note: suggested alternative: 'TCB2'
   TCCR2A |= 0b00000011;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: note: suggested alternative: 'TCB2'
   TCCR2B |= 0b00000100;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: note: suggested alternative: 'TIMERB2'
   TIMSK2 |= 0b00000011;
   ^~~~~~
   TIMERB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo

examples/5_IR_sensor

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/5_IR_sensor/5_IR_sensor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: note: suggested alternative: 'TCB2'
   TCCR2A |= 0b00000011;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: note: suggested alternative: 'TCB2'
   TCCR2B |= 0b00000100;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: note: suggested alternative: 'TIMERB2'
   TIMSK2 |= 0b00000011;
   ^~~~~~
   TIMERB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart

examples/6_Motor

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/6_Motor/6_Motor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: note: suggested alternative: 'TCB2'
   TCCR2A |= 0b00000011;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: note: suggested alternative: 'TCB2'
   TCCR2B |= 0b00000100;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: note: suggested alternative: 'TIMERB2'
   TIMSK2 |= 0b00000011;
   ^~~~~~
   TIMERB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32

examples/7_Line_follower

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/7_Line_follower/7_Line_follower.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: note: suggested alternative: 'TCB2'
   TCCR2A |= 0b00000011;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: note: suggested alternative: 'TCB2'
   TCCR2B |= 0b00000100;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: note: suggested alternative: 'TIMERB2'
   TIMSK2 |= 0b00000011;
   ^~~~~~
   TIMERB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32

examples/8_Ultrasonic

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/8_Ultrasonic/8_Ultrasonic.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: note: suggested alternative: 'TCB2'
   TCCR2A |= 0b00000011;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: note: suggested alternative: 'TCB2'
   TCCR2B |= 0b00000100;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: note: suggested alternative: 'TIMERB2'
   TIMSK2 |= 0b00000011;
   ^~~~~~
   TIMERB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo

examples/9_Servo

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/9_Servo/9_Servo.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: note: suggested alternative: 'TCB2'
   TCCR2A |= 0b00000011;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: note: suggested alternative: 'TCB2'
   TCCR2B |= 0b00000100;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: note: suggested alternative: 'TIMERB2'
   TIMSK2 |= 0b00000011;
   ^~~~~~
   TIMERB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /tmp/arduino-testlib1022429920/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: note: suggested alternative: 'TCC2'
   TCCR2A |= 0b00000011;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: note: suggested alternative: 'TCC2'
   TCCR2B |= 0b00000100;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart

examples/1_Laser

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/1_Laser/1_Laser.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: note: suggested alternative: 'TCC2'
   TCCR2A |= 0b00000011;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: note: suggested alternative: 'TCC2'
   TCCR2B |= 0b00000100;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive

examples/2_Switch

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/2_Switch/2_Switch.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: note: suggested alternative: 'TCC2'
   TCCR2A |= 0b00000011;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: note: suggested alternative: 'TCC2'
   TCCR2B |= 0b00000100;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo

examples/3_Switch_select

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/3_Switch_select/3_Switch_select.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: note: suggested alternative: 'TCC2'
   TCCR2A |= 0b00000011;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: note: suggested alternative: 'TCC2'
   TCCR2B |= 0b00000100;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32

examples/4_Serial

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/4_Serial/4_Serial.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: note: suggested alternative: 'TCC2'
   TCCR2A |= 0b00000011;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: note: suggested alternative: 'TCC2'
   TCCR2B |= 0b00000100;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive

examples/5_IR_sensor

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/5_IR_sensor/5_IR_sensor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: note: suggested alternative: 'TCC2'
   TCCR2A |= 0b00000011;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: note: suggested alternative: 'TCC2'
   TCCR2B |= 0b00000100;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo

examples/6_Motor

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/6_Motor/6_Motor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: note: suggested alternative: 'TCC2'
   TCCR2A |= 0b00000011;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: note: suggested alternative: 'TCC2'
   TCCR2B |= 0b00000100;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32

examples/7_Line_follower

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/7_Line_follower/7_Line_follower.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: note: suggested alternative: 'TCC2'
   TCCR2A |= 0b00000011;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: note: suggested alternative: 'TCC2'
   TCCR2B |= 0b00000100;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/8_Ultrasonic

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/8_Ultrasonic/8_Ultrasonic.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: note: suggested alternative: 'TCC2'
   TCCR2A |= 0b00000011;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: note: suggested alternative: 'TCC2'
   TCCR2B |= 0b00000100;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32

examples/9_Servo

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/9_Servo/9_Servo.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: note: suggested alternative: 'TCC2'
   TCCR2A |= 0b00000011;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: note: suggested alternative: 'TCC2'
   TCCR2B |= 0b00000100;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /tmp/arduino-testlib1022429920/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'uint8_t sensor4()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:28:30: error: 'A2' was not declared in this scope
 #define SENS_RIGHT_INNER_PIN A2
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:159:20: note: in expansion of macro 'SENS_RIGHT_INNER_PIN'
  return analogRead(SENS_RIGHT_INNER_PIN);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'uint8_t sensor5()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:29:30: error: 'A1' was not declared in this scope
 #define SENS_RIGHT_OUTER_PIN A1
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:164:20: note: in expansion of macro 'SENS_RIGHT_OUTER_PIN'
  return analogRead(SENS_RIGHT_OUTER_PIN);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart

examples/1_Laser

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/1_Laser/1_Laser.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'uint8_t sensor4()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:28:30: error: 'A2' was not declared in this scope
 #define SENS_RIGHT_INNER_PIN A2
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:159:20: note: in expansion of macro 'SENS_RIGHT_INNER_PIN'
  return analogRead(SENS_RIGHT_INNER_PIN);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'uint8_t sensor5()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:29:30: error: 'A1' was not declared in this scope
 #define SENS_RIGHT_OUTER_PIN A1
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:164:20: note: in expansion of macro 'SENS_RIGHT_OUTER_PIN'
  return analogRead(SENS_RIGHT_OUTER_PIN);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo

examples/2_Switch

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/2_Switch/2_Switch.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'uint8_t sensor4()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:28:30: error: 'A2' was not declared in this scope
 #define SENS_RIGHT_INNER_PIN A2
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:159:20: note: in expansion of macro 'SENS_RIGHT_INNER_PIN'
  return analogRead(SENS_RIGHT_INNER_PIN);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'uint8_t sensor5()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:29:30: error: 'A1' was not declared in this scope
 #define SENS_RIGHT_OUTER_PIN A1
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:164:20: note: in expansion of macro 'SENS_RIGHT_OUTER_PIN'
  return analogRead(SENS_RIGHT_OUTER_PIN);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo

examples/3_Switch_select

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/3_Switch_select/3_Switch_select.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'uint8_t sensor4()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:28:30: error: 'A2' was not declared in this scope
 #define SENS_RIGHT_INNER_PIN A2
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:159:20: note: in expansion of macro 'SENS_RIGHT_INNER_PIN'
  return analogRead(SENS_RIGHT_INNER_PIN);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'uint8_t sensor5()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:29:30: error: 'A1' was not declared in this scope
 #define SENS_RIGHT_OUTER_PIN A1
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:164:20: note: in expansion of macro 'SENS_RIGHT_OUTER_PIN'
  return analogRead(SENS_RIGHT_OUTER_PIN);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/4_Serial

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/4_Serial/4_Serial.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'uint8_t sensor4()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:28:30: error: 'A2' was not declared in this scope
 #define SENS_RIGHT_INNER_PIN A2
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:159:20: note: in expansion of macro 'SENS_RIGHT_INNER_PIN'
  return analogRead(SENS_RIGHT_INNER_PIN);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'uint8_t sensor5()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:29:30: error: 'A1' was not declared in this scope
 #define SENS_RIGHT_OUTER_PIN A1
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:164:20: note: in expansion of macro 'SENS_RIGHT_OUTER_PIN'
  return analogRead(SENS_RIGHT_OUTER_PIN);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive

examples/5_IR_sensor

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/5_IR_sensor/5_IR_sensor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'uint8_t sensor4()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:28:30: error: 'A2' was not declared in this scope
 #define SENS_RIGHT_INNER_PIN A2
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:159:20: note: in expansion of macro 'SENS_RIGHT_INNER_PIN'
  return analogRead(SENS_RIGHT_INNER_PIN);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'uint8_t sensor5()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:29:30: error: 'A1' was not declared in this scope
 #define SENS_RIGHT_OUTER_PIN A1
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:164:20: note: in expansion of macro 'SENS_RIGHT_OUTER_PIN'
  return analogRead(SENS_RIGHT_OUTER_PIN);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo

examples/6_Motor

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/6_Motor/6_Motor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'uint8_t sensor4()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:28:30: error: 'A2' was not declared in this scope
 #define SENS_RIGHT_INNER_PIN A2
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:159:20: note: in expansion of macro 'SENS_RIGHT_INNER_PIN'
  return analogRead(SENS_RIGHT_INNER_PIN);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'uint8_t sensor5()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:29:30: error: 'A1' was not declared in this scope
 #define SENS_RIGHT_OUTER_PIN A1
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:164:20: note: in expansion of macro 'SENS_RIGHT_OUTER_PIN'
  return analogRead(SENS_RIGHT_OUTER_PIN);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo

examples/7_Line_follower

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/7_Line_follower/7_Line_follower.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'uint8_t sensor4()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:28:30: error: 'A2' was not declared in this scope
 #define SENS_RIGHT_INNER_PIN A2
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:159:20: note: in expansion of macro 'SENS_RIGHT_INNER_PIN'
  return analogRead(SENS_RIGHT_INNER_PIN);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'uint8_t sensor5()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:29:30: error: 'A1' was not declared in this scope
 #define SENS_RIGHT_OUTER_PIN A1
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:164:20: note: in expansion of macro 'SENS_RIGHT_OUTER_PIN'
  return analogRead(SENS_RIGHT_OUTER_PIN);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/8_Ultrasonic

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/8_Ultrasonic/8_Ultrasonic.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'uint8_t sensor4()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:28:30: error: 'A2' was not declared in this scope
 #define SENS_RIGHT_INNER_PIN A2
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:159:20: note: in expansion of macro 'SENS_RIGHT_INNER_PIN'
  return analogRead(SENS_RIGHT_INNER_PIN);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'uint8_t sensor5()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:29:30: error: 'A1' was not declared in this scope
 #define SENS_RIGHT_OUTER_PIN A1
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:164:20: note: in expansion of macro 'SENS_RIGHT_OUTER_PIN'
  return analogRead(SENS_RIGHT_OUTER_PIN);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart

examples/9_Servo

Result: FAIL

WARNING: library iBotX claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/examples/9_Servo/9_Servo.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void iBotX()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:64:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A |= 0b00000011;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:65:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B |= 0b00000100;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:66:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 |= 0b00000011;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:67:3: error: 'OCR2A' was not declared in this scope
   OCR2A = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:71:3: error: 'OCR2B' was not declared in this scope
   OCR2B = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'uint8_t sensor4()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:28:30: error: 'A2' was not declared in this scope
 #define SENS_RIGHT_INNER_PIN A2
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:159:20: note: in expansion of macro 'SENS_RIGHT_INNER_PIN'
  return analogRead(SENS_RIGHT_INNER_PIN);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'uint8_t sensor5()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:29:30: error: 'A1' was not declared in this scope
 #define SENS_RIGHT_OUTER_PIN A1
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:164:20: note: in expansion of macro 'SENS_RIGHT_OUTER_PIN'
  return analogRead(SENS_RIGHT_OUTER_PIN);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: In function 'void motor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:213:3: error: 'OCR2A' was not declared in this scope
   OCR2A = spd_l;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:214:3: error: 'OCR2B' was not declared in this scope
   OCR2B = spd_r;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:278:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:283:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/iBotX/src/iBotX.h:288:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo