This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 0.8.3
More details
| Board | Claims compatibility | Inclusion | lx16aServo_Multiple_Servos |
lx16aSetServoID |
lx16aOneWireESPExample |
lx16aServoExample |
lx16aServo_Calibrate_Motors |
lx16aServo_Motor_Mode |
|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | FAIL | PASS | PASS | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | FAIL | PASS | FAIL | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | FAIL | PASS | PASS | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
Result: PASS
Sketch uses 1332 bytes (4%) of program storage space. Maximum is 32256 bytes. Global variables use 184 bytes (8%) of dynamic memory, leaving 1864 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aOneWireESPExample/lx16aOneWireESPExample.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aOneWireESPExample/lx16aOneWireESPExample.ino:9:28: error: 'Serial2' was not declared in this scope
servoBus.beginOnePinMode(&Serial2,33);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aOneWireESPExample/lx16aOneWireESPExample.ino:9:28: note: suggested alternative: 'Serial'
servoBus.beginOnePinMode(&Serial2,33);
^~~~~~~
Serial
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServoExample/lx16aServoExample.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServoExample/lx16aServoExample.ino:7:18: error: 'Serial1' was not declared in this scope
servoBus.begin(&Serial1,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServoExample/lx16aServoExample.ino:7:18: note: suggested alternative: 'Serial'
servoBus.begin(&Serial1,
^~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServoExample/lx16aServoExample.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServoExample/lx16aServoExample.ino:22:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nPosition at %d -> %s\n", pos,
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServoExample/lx16aServoExample.ino:28:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Move to %d -> %s\n", angle,
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino:16:18: error: 'Serial1' was not declared in this scope
servoBus.begin(&Serial1, 1, // on TX pin 1
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino:16:18: note: suggested alternative: 'Serial'
servoBus.begin(&Serial1, 1, // on TX pin 1
^~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino:81:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nPosition at %d, %d and %d-> %s\n", pos, pos2, pos3,
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino:107:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nMAX at %d, %d and %d", servo.getMaxCentDegrees(), servo2.getMaxCentDegrees(), servo3.getMaxCentDegrees());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino:108:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("\nPos at %d, %d and %d", pos, pos2, pos3);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino:109:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("\nmin at %d, %d and %d", servo.getMinCentDegrees(), servo2.getMinCentDegrees(), servo3.getMinCentDegrees());
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Motor_Mode/lx16aServo_Motor_Mode.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Motor_Mode/lx16aServo_Motor_Mode.ino:6:18: error: 'Serial1' was not declared in this scope
servoBus.begin(&Serial1,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Motor_Mode/lx16aServo_Motor_Mode.ino:6:18: note: suggested alternative: 'Serial'
servoBus.begin(&Serial1,
^~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Motor_Mode/lx16aServo_Motor_Mode.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Motor_Mode/lx16aServo_Motor_Mode.ino:16:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nPosition at %d -> %s\n", pos,
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Motor_Mode/lx16aServo_Motor_Mode.ino:24:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Move to %d -> %s\n", angle,
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Multiple_Servos/lx16aServo_Multiple_Servos.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Multiple_Servos/lx16aServo_Multiple_Servos.ino:8:18: error: 'Serial1' was not declared in this scope
servoBus.begin(&Serial1, 1, // on TX pin 1
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Multiple_Servos/lx16aServo_Multiple_Servos.ino:8:18: note: suggested alternative: 'Serial'
servoBus.begin(&Serial1, 1, // on TX pin 1
^~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Multiple_Servos/lx16aServo_Multiple_Servos.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Multiple_Servos/lx16aServo_Multiple_Servos.ino:36:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nPosition at %d and %d-> %s\n", pos, pos2,
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Multiple_Servos/lx16aServo_Multiple_Servos.ino:38:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("Move to %d -> %s\n", angle,
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Multiple_Servos/lx16aServo_Multiple_Servos.ino:64:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nPosition at %d and %d\n", pos, pos2);
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aSetServoID/lx16aSetServoID.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aSetServoID/lx16aSetServoID.ino:7:18: error: 'Serial1' was not declared in this scope
servoBus.begin(&Serial1,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aSetServoID/lx16aSetServoID.ino:7:18: note: suggested alternative: 'Serial'
servoBus.begin(&Serial1,
^~~~~~~
Serial
Result: PASS
Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 83202 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43508 bytes (16%) of dynamic memory, leaving 226828 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServoExample/lx16aServoExample.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServoExample/lx16aServoExample.ino:22:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nPosition at %d -> %s\n", pos,
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServoExample/lx16aServoExample.ino:28:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Move to %d -> %s\n", angle,
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino:81:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nPosition at %d, %d and %d-> %s\n", pos, pos2, pos3,
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino:107:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nMAX at %d, %d and %d", servo.getMaxCentDegrees(), servo2.getMaxCentDegrees(), servo3.getMaxCentDegrees());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino:108:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("\nPos at %d, %d and %d", pos, pos2, pos3);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino:109:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("\nmin at %d, %d and %d", servo.getMinCentDegrees(), servo2.getMinCentDegrees(), servo3.getMinCentDegrees());
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Motor_Mode/lx16aServo_Motor_Mode.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Motor_Mode/lx16aServo_Motor_Mode.ino:16:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nPosition at %d -> %s\n", pos,
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Motor_Mode/lx16aServo_Motor_Mode.ino:24:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Move to %d -> %s\n", angle,
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Multiple_Servos/lx16aServo_Multiple_Servos.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Multiple_Servos/lx16aServo_Multiple_Servos.ino:36:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nPosition at %d and %d-> %s\n", pos, pos2,
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Multiple_Servos/lx16aServo_Multiple_Servos.ino:38:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Move to %d -> %s\n", angle,
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Multiple_Servos/lx16aServo_Multiple_Servos.ino:64:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nPosition at %d and %d\n", pos, pos2);
^~~~~~
print
Result: PASS
Sketch uses 81232 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43508 bytes (16%) of dynamic memory, leaving 226828 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 2614 bytes (5%) of program storage space. Maximum is 49152 bytes. Global variables use 177 bytes (2%) of dynamic memory, leaving 5967 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aOneWireESPExample/lx16aOneWireESPExample.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aOneWireESPExample/lx16aOneWireESPExample.ino:9:28: error: 'Serial2' was not declared in this scope
servoBus.beginOnePinMode(&Serial2,33);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aOneWireESPExample/lx16aOneWireESPExample.ino:9:28: note: suggested alternative: 'Serial1'
servoBus.beginOnePinMode(&Serial2,33);
^~~~~~~
Serial1
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServoExample/lx16aServoExample.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServoExample/lx16aServoExample.ino:22:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nPosition at %d -> %s\n", pos,
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServoExample/lx16aServoExample.ino:28:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Move to %d -> %s\n", angle,
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino:81:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nPosition at %d, %d and %d-> %s\n", pos, pos2, pos3,
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino:107:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nMAX at %d, %d and %d", servo.getMaxCentDegrees(), servo2.getMaxCentDegrees(), servo3.getMaxCentDegrees());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino:108:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("\nPos at %d, %d and %d", pos, pos2, pos3);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino:109:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("\nmin at %d, %d and %d", servo.getMinCentDegrees(), servo2.getMinCentDegrees(), servo3.getMinCentDegrees());
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Motor_Mode/lx16aServo_Motor_Mode.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Motor_Mode/lx16aServo_Motor_Mode.ino:16:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nPosition at %d -> %s\n", pos,
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Motor_Mode/lx16aServo_Motor_Mode.ino:24:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Move to %d -> %s\n", angle,
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Multiple_Servos/lx16aServo_Multiple_Servos.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Multiple_Servos/lx16aServo_Multiple_Servos.ino:36:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nPosition at %d and %d-> %s\n", pos, pos2,
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Multiple_Servos/lx16aServo_Multiple_Servos.ino:38:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("Move to %d -> %s\n", angle,
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Multiple_Servos/lx16aServo_Multiple_Servos.ino:64:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nPosition at %d and %d\n", pos, pos2);
^~~~~~
print
Result: PASS
Sketch uses 6847 bytes (13%) of program storage space. Maximum is 49152 bytes. Global variables use 379 bytes (6%) of dynamic memory, leaving 5765 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 12148 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 17564 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 3056 bytes (9%) of dynamic memory, leaving 29712 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServoExample/lx16aServoExample.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServoExample/lx16aServoExample.ino:22:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nPosition at %d -> %s\n", pos,
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServoExample/lx16aServoExample.ino:28:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Move to %d -> %s\n", angle,
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino:81:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nPosition at %d, %d and %d-> %s\n", pos, pos2, pos3,
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino:107:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nMAX at %d, %d and %d", servo.getMaxCentDegrees(), servo2.getMaxCentDegrees(), servo3.getMaxCentDegrees());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino:108:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("\nPos at %d, %d and %d", pos, pos2, pos3);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Calibrate_Motors/lx16aServo_Calibrate_Motors.ino:109:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("\nmin at %d, %d and %d", servo.getMinCentDegrees(), servo2.getMinCentDegrees(), servo3.getMinCentDegrees());
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Motor_Mode/lx16aServo_Motor_Mode.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Motor_Mode/lx16aServo_Motor_Mode.ino:16:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nPosition at %d -> %s\n", pos,
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Motor_Mode/lx16aServo_Motor_Mode.ino:24:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Move to %d -> %s\n", angle,
^~~~~~
print
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Multiple_Servos/lx16aServo_Multiple_Servos.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Multiple_Servos/lx16aServo_Multiple_Servos.ino:36:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nPosition at %d and %d-> %s\n", pos, pos2,
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Multiple_Servos/lx16aServo_Multiple_Servos.ino:38:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Move to %d -> %s\n", angle,
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/lx16a-servo/examples/lx16aServo_Multiple_Servos/lx16aServo_Multiple_Servos.ino:64:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("\n\nPosition at %d and %d\n", pos, pos2);
^~~~~~
print
Result: PASS
Sketch uses 14524 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3056 bytes (9%) of dynamic memory, leaving 29712 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 200506 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13192 bytes (4%) of dynamic memory, leaving 314488 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 211798 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13480 bytes (4%) of dynamic memory, leaving 314200 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 212654 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13480 bytes (4%) of dynamic memory, leaving 314200 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 217098 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13568 bytes (4%) of dynamic memory, leaving 314112 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 212150 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13480 bytes (4%) of dynamic memory, leaving 314200 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 213254 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13544 bytes (4%) of dynamic memory, leaving 314136 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 207546 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13480 bytes (4%) of dynamic memory, leaving 314200 bytes for local variables. Maximum is 327680 bytes.