This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.0
More details
| Board | Claims compatibility | Inclusion | genericLTC2633 |
powerManagement |
configureLTC2633 |
dataManagement |
|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes ⚠️ | FAIL | PASS | PASS | FAIL | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes ⚠️ | FAIL | PASS | PASS | FAIL | PASS |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL |
Result: FAIL
This library has no main header file so an empty one was created.
/tmp/arduino-testlib1399038247/test/test.ino:1:10: fatal error: miniDAC.h: No such file or directory
#include <miniDAC.h>
^~~~~~~~~~~
compilation terminated.
Result: FAIL
Result: PASS
Sketch uses 4996 bytes (15%) of program storage space. Maximum is 32256 bytes. Global variables use 207 bytes (10%) of dynamic memory, leaving 1841 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5030 bytes (15%) of program storage space. Maximum is 32256 bytes. Global variables use 207 bytes (10%) of dynamic memory, leaving 1841 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 2004 bytes (6%) of program storage space. Maximum is 32256 bytes. Global variables use 203 bytes (9%) of dynamic memory, leaving 1845 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
This library has no main header file so an empty one was created.
/tmp/arduino-testlib1399038247/test/test.ino:1:10: fatal error: miniDAC.h: No such file or directory
#include <miniDAC.h>
^~~~~~~~~~~
compilation terminated.
Result: FAIL
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:25:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/examples/dataManagement/dataManagement.ino:37:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633CFG.h:80:9: error: redeclaration of 'NC'
NC = 0x11,
^~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/PeripheralNames.h:21:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:24,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
from /tmp/arduino-sketch-A8D11F836768FFD6B401CCA4A85AAB1F/sketch/dataManagement.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/TARGET_NANO_RP2040_CONNECT/PinNames.h:78:5: note: previous declaration 'PinName NC'
NC = (int)0xFFFFFFFF
^~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:25:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/examples/genericLTC2633/genericLTC2633.ino:37:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633CFG.h:80:9: error: redeclaration of 'NC'
NC = 0x11,
^~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/PeripheralNames.h:21:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:24,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
from /tmp/arduino-sketch-B6B27B9E933A64A1D272CD7265BCEA71/sketch/genericLTC2633.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/TARGET_NANO_RP2040_CONNECT/PinNames.h:78:5: note: previous declaration 'PinName NC'
NC = (int)0xFFFFFFFF
^~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:25:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/examples/powerManagement/powerManagement.ino:37:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633CFG.h:80:9: error: redeclaration of 'NC'
NC = 0x11,
^~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/PeripheralNames.h:21:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:24,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
from /tmp/arduino-sketch-77EA2DF98F56CF107CE8B4505F29A130/sketch/powerManagement.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/TARGET_NANO_RP2040_CONNECT/PinNames.h:78:5: note: previous declaration 'PinName NC'
NC = (int)0xFFFFFFFF
^~
Result: FAIL
This library has no main header file so an empty one was created.
/tmp/arduino-testlib1399038247/test/test.ino:1:10: fatal error: miniDAC.h: No such file or directory
#include <miniDAC.h>
^~~~~~~~~~~
compilation terminated.
Result: FAIL
Result: PASS
Sketch uses 6184 bytes (12%) of program storage space. Maximum is 49152 bytes. Global variables use 337 bytes (5%) of dynamic memory, leaving 5807 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 6224 bytes (12%) of program storage space. Maximum is 49152 bytes. Global variables use 337 bytes (5%) of dynamic memory, leaving 5807 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 3318 bytes (6%) of program storage space. Maximum is 49152 bytes. Global variables use 333 bytes (5%) of dynamic memory, leaving 5811 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
This library has no main header file so an empty one was created.
/tmp/arduino-testlib1399038247/test/test.ino:1:10: fatal error: miniDAC.h: No such file or directory
#include <miniDAC.h>
^~~~~~~~~~~
compilation terminated.
Result: FAIL
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21.h:69:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd.h:105,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:38,
from /tmp/arduino-sketch-A8D11F836768FFD6B401CCA4A85AAB1F/sketch/dataManagement.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:38: error: expected ')' before '*' token
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633CFG.h:64:3: note: in expansion of macro 'DAC'
} DAC;
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:38: error: expected ')' before '*' token
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633CFG.h:64:3: note: in expansion of macro 'DAC'
} DAC;
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:27: error: expected identifier before '(' token
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:64:20: note: in expansion of macro 'DAC'
void powerDown(DAC _dac = both); //Power down all DAC, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected ')' before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:64:20: note: in expansion of macro 'DAC'
void powerDown(DAC _dac = both); //Power down all DAC, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected ')' before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:64:20: note: in expansion of macro 'DAC'
void powerDown(DAC _dac = both); //Power down all DAC, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:39: error: expected ';' at end of member declaration
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:64:20: note: in expansion of macro 'DAC'
void powerDown(DAC _dac = both); //Power down all DAC, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected unqualified-id before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:64:20: note: in expansion of macro 'DAC'
void powerDown(DAC _dac = both); //Power down all DAC, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:27: error: expected identifier before '(' token
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:65:31: note: in expansion of macro 'DAC'
void volt(uint64_t _data, DAC _dac = both); //Write voltage code and update BOTH DACs, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected ')' before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:65:31: note: in expansion of macro 'DAC'
void volt(uint64_t _data, DAC _dac = both); //Write voltage code and update BOTH DACs, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected ')' before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:65:31: note: in expansion of macro 'DAC'
void volt(uint64_t _data, DAC _dac = both); //Write voltage code and update BOTH DACs, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:39: error: expected ';' at end of member declaration
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:65:31: note: in expansion of macro 'DAC'
void volt(uint64_t _data, DAC _dac = both); //Write voltage code and update BOTH DACs, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected unqualified-id before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:65:31: note: in expansion of macro 'DAC'
void volt(uint64_t _data, DAC _dac = both); //Write voltage code and update BOTH DACs, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:27: error: expected identifier before '(' token
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:66:15: note: in expansion of macro 'DAC'
void load(DAC _dac = both); //Updates previously stored value of both DAC registers
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected ')' before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:66:15: note: in expansion of macro 'DAC'
void load(DAC _dac = both); //Updates previously stored value of both DAC registers
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected ')' before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:66:15: note: in expansion of macro 'DAC'
void load(DAC _dac = both); //Updates previously stored value of both DAC registers
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:39: error: expected ';' at end of member declaration
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:66:15: note: in expansion of macro 'DAC'
void load(DAC _dac = both); //Updates previously stored value of both DAC registers
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected unqualified-id before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21.h:69:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd.h:105,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:38,
from /tmp/arduino-sketch-B6B27B9E933A64A1D272CD7265BCEA71/sketch/genericLTC2633.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:38: error: expected ')' before '*' token
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633CFG.h:64:3: note: in expansion of macro 'DAC'
} DAC;
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:38: error: expected ')' before '*' token
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633CFG.h:64:3: note: in expansion of macro 'DAC'
} DAC;
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:27: error: expected identifier before '(' token
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:64:20: note: in expansion of macro 'DAC'
void powerDown(DAC _dac = both); //Power down all DAC, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected ')' before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:64:20: note: in expansion of macro 'DAC'
void powerDown(DAC _dac = both); //Power down all DAC, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected ')' before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:64:20: note: in expansion of macro 'DAC'
void powerDown(DAC _dac = both); //Power down all DAC, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:39: error: expected ';' at end of member declaration
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:64:20: note: in expansion of macro 'DAC'
void powerDown(DAC _dac = both); //Power down all DAC, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected unqualified-id before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:64:20: note: in expansion of macro 'DAC'
void powerDown(DAC _dac = both); //Power down all DAC, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:27: error: expected identifier before '(' token
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:65:31: note: in expansion of macro 'DAC'
void volt(uint64_t _data, DAC _dac = both); //Write voltage code and update BOTH DACs, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected ')' before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:65:31: note: in expansion of macro 'DAC'
void volt(uint64_t _data, DAC _dac = both); //Write voltage code and update BOTH DACs, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected ')' before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:65:31: note: in expansion of macro 'DAC'
void volt(uint64_t _data, DAC _dac = both); //Write voltage code and update BOTH DACs, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:39: error: expected ';' at end of member declaration
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:65:31: note: in expansion of macro 'DAC'
void volt(uint64_t _data, DAC _dac = both); //Write voltage code and update BOTH DACs, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected unqualified-id before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:65:31: note: in expansion of macro 'DAC'
void volt(uint64_t _data, DAC _dac = both); //Write voltage code and update BOTH DACs, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:27: error: expected identifier before '(' token
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:66:15: note: in expansion of macro 'DAC'
void load(DAC _dac = both); //Updates previously stored value of both DAC registers
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected ')' before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:66:15: note: in expansion of macro 'DAC'
void load(DAC _dac = both); //Updates previously stored value of both DAC registers
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected ')' before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:66:15: note: in expansion of macro 'DAC'
void load(DAC _dac = both); //Updates previously stored value of both DAC registers
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:39: error: expected ';' at end of member declaration
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:66:15: note: in expansion of macro 'DAC'
void load(DAC _dac = both); //Updates previously stored value of both DAC registers
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected unqualified-id before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21.h:69:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd.h:105,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:38,
from /tmp/arduino-sketch-77EA2DF98F56CF107CE8B4505F29A130/sketch/powerManagement.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:38: error: expected ')' before '*' token
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633CFG.h:64:3: note: in expansion of macro 'DAC'
} DAC;
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:38: error: expected ')' before '*' token
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633CFG.h:64:3: note: in expansion of macro 'DAC'
} DAC;
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:27: error: expected identifier before '(' token
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:64:20: note: in expansion of macro 'DAC'
void powerDown(DAC _dac = both); //Power down all DAC, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected ')' before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:64:20: note: in expansion of macro 'DAC'
void powerDown(DAC _dac = both); //Power down all DAC, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected ')' before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:64:20: note: in expansion of macro 'DAC'
void powerDown(DAC _dac = both); //Power down all DAC, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:39: error: expected ';' at end of member declaration
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:64:20: note: in expansion of macro 'DAC'
void powerDown(DAC _dac = both); //Power down all DAC, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected unqualified-id before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:64:20: note: in expansion of macro 'DAC'
void powerDown(DAC _dac = both); //Power down all DAC, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:27: error: expected identifier before '(' token
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:65:31: note: in expansion of macro 'DAC'
void volt(uint64_t _data, DAC _dac = both); //Write voltage code and update BOTH DACs, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected ')' before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:65:31: note: in expansion of macro 'DAC'
void volt(uint64_t _data, DAC _dac = both); //Write voltage code and update BOTH DACs, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected ')' before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:65:31: note: in expansion of macro 'DAC'
void volt(uint64_t _data, DAC _dac = both); //Write voltage code and update BOTH DACs, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:39: error: expected ';' at end of member declaration
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:65:31: note: in expansion of macro 'DAC'
void volt(uint64_t _data, DAC _dac = both); //Write voltage code and update BOTH DACs, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected unqualified-id before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:65:31: note: in expansion of macro 'DAC'
void volt(uint64_t _data, DAC _dac = both); //Write voltage code and update BOTH DACs, by default
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:27: error: expected identifier before '(' token
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:66:15: note: in expansion of macro 'DAC'
void load(DAC _dac = both); //Updates previously stored value of both DAC registers
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected ')' before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:66:15: note: in expansion of macro 'DAC'
void load(DAC _dac = both); //Updates previously stored value of both DAC registers
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected ')' before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:66:15: note: in expansion of macro 'DAC'
void load(DAC _dac = both); //Updates previously stored value of both DAC registers
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:39: error: expected ';' at end of member declaration
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:66:15: note: in expansion of macro 'DAC'
void load(DAC _dac = both); //Updates previously stored value of both DAC registers
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:421:40: error: expected unqualified-id before numeric constant
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
^
/home
Result: FAIL
This library has no main header file so an empty one was created.
/tmp/arduino-testlib1399038247/test/test.ino:1:21: fatal error: miniDAC.h: No such file or directory compilation terminated.
Result: FAIL
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:25:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/examples/dataManagement/dataManagement.ino:37:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633CFG.h:60:10: error: 'DAC1' redeclared as different kind of symbol
DAC1 = 0x01,
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/variants/d1_mini32/pins_arduino.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:185,
from /tmp/arduino-sketch-A8D11F836768FFD6B401CCA4A85AAB1F/sketch/dataManagement.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/variants/d1_mini32/../d32/d32_core.h:51:22: note: previous declaration 'const uint8_t DAC1'
static const uint8_t DAC1 = 25;
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:25:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/examples/genericLTC2633/genericLTC2633.ino:37:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633CFG.h:60:10: error: 'DAC1' redeclared as different kind of symbol
DAC1 = 0x01,
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/variants/d1_mini32/pins_arduino.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:185,
from /tmp/arduino-sketch-B6B27B9E933A64A1D272CD7265BCEA71/sketch/genericLTC2633.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/variants/d1_mini32/../d32/d32_core.h:51:22: note: previous declaration 'const uint8_t DAC1'
static const uint8_t DAC1 = 25;
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633.h:25:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/examples/powerManagement/powerManagement.ino:37:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/miniDAC/LTC2633CFG.h:60:10: error: 'DAC1' redeclared as different kind of symbol
DAC1 = 0x01,
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/variants/d1_mini32/pins_arduino.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:185,
from /tmp/arduino-sketch-77EA2DF98F56CF107CE8B4505F29A130/sketch/powerManagement.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/variants/d1_mini32/../d32/d32_core.h:51:22: note: previous declaration 'const uint8_t DAC1'
static const uint8_t DAC1 = 25;
^