This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 2.2.0
More details
| Board | Claims compatibility | Inclusion | mcp9808 |
photoCell |
tmp36 |
GetReadings |
mcp9800 |
|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No ⚠️ | PASS | PASS | PASS | PASS | PASS | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No ⚠️ | PASS | PASS | PASS | PASS | PASS | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
No ⚠️ | PASS | PASS | PASS | PASS | PASS | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
No ⚠️ | PASS | PASS | PASS | PASS | PASS | FAIL |
Result: PASS
Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 2910 bytes (9%) of program storage space. Maximum is 32256 bytes. Global variables use 232 bytes (11%) of dynamic memory, leaving 1816 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 6960 bytes (21%) of program storage space. Maximum is 32256 bytes. Global variables use 441 bytes (21%) of dynamic memory, leaving 1607 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 7450 bytes (23%) of program storage space. Maximum is 32256 bytes. Global variables use 459 bytes (22%) of dynamic memory, leaving 1589 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 3064 bytes (9%) of program storage space. Maximum is 32256 bytes. Global variables use 210 bytes (10%) of dynamic memory, leaving 1838 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 4638 bytes (14%) of program storage space. Maximum is 32256 bytes. Global variables use 226 bytes (11%) of dynamic memory, leaving 1822 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 79146 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43468 bytes (16%) of dynamic memory, leaving 226868 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library MCP9800 claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/movingAvg/examples/mcp9800/mcp9800.ino:9:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9800/MCP9800.h:30:6: error: #error "The MCP9800 library only supports the AVR architecture."
#error "The MCP9800 library only supports the AVR architecture."
^~~~~
Result: PASS
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). WARNING: library MCP9808 claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 82788 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44264 bytes (16%) of dynamic memory, leaving 226072 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 79850 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43540 bytes (16%) of dynamic memory, leaving 226796 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 80092 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43540 bytes (16%) of dynamic memory, leaving 226796 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes. Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 3951 bytes (8%) of program storage space. Maximum is 49152 bytes. Global variables use 199 bytes (3%) of dynamic memory, leaving 5945 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library MCP9800 claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/movingAvg/examples/mcp9800/mcp9800.ino:9:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9800/MCP9800.h:30:6: error: #error "The MCP9800 library only supports the AVR architecture."
#error "The MCP9800 library only supports the AVR architecture."
^~~~~
Result: PASS
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library MCP9808 claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 7930 bytes (16%) of program storage space. Maximum is 49152 bytes.
Global variables use 525 bytes (8%) of dynamic memory, leaving 5619 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/src/MCP9808.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/src/MCP9808.cpp:5:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t MCP9808::read()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 4025 bytes (8%) of program storage space. Maximum is 49152 bytes. Global variables use 199 bytes (3%) of dynamic memory, leaving 5945 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 5597 bytes (11%) of program storage space. Maximum is 49152 bytes. Global variables use 199 bytes (3%) of dynamic memory, leaving 5945 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 13156 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3016 bytes (9%) of dynamic memory, leaving 29752 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
WARNING: library MCP9800 claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/movingAvg/examples/mcp9800/mcp9800.ino:9:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9800/MCP9800.h:30:6: error: #error "The MCP9800 library only supports the AVR architecture."
#error "The MCP9800 library only supports the AVR architecture."
^~~~~
Result: PASS
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s). WARNING: library MCP9808 claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 22560 bytes (8%) of program storage space. Maximum is 262144 bytes. Global variables use 3608 bytes (11%) of dynamic memory, leaving 29160 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 13080 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 3016 bytes (9%) of dynamic memory, leaving 29752 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 20824 bytes (7%) of program storage space. Maximum is 262144 bytes. Global variables use 3016 bytes (9%) of dynamic memory, leaving 29752 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 197956 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13084 bytes (3%) of dynamic memory, leaving 314596 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 206346 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13432 bytes (4%) of dynamic memory, leaving 314248 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library MCP9800 claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/movingAvg/examples/mcp9800/mcp9800.ino:9:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9800/MCP9800.h:30:6: error: #error "The MCP9800 library only supports the AVR architecture."
#error "The MCP9800 library only supports the AVR architecture."
^
Result: PASS
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). WARNING: library MCP9808 claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 215682 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14176 bytes (4%) of dynamic memory, leaving 313504 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 221802 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13456 bytes (4%) of dynamic memory, leaving 314224 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library movingAvg claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 222330 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13456 bytes (4%) of dynamic memory, leaving 314224 bytes for local variables. Maximum is 327680 bytes.