This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.0
More details
| Board | Claims compatibility | Inclusion | SSD1306DrawingDemo |
SSD1306SimpleDemo |
SSD1306TwoScreenDemo |
SSD1306UiDemo |
Read_Battery_Level |
SSD1306ClockDemo |
|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
No ⚠️ | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No ⚠️ | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No ⚠️ | PASS | FAIL | PASS | FAIL | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
No ⚠️ | PASS | FAIL | PASS | FAIL | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
No ⚠️ | PASS | FAIL | PASS | PASS | PASS | FAIL | PASS |
Result: PASS
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on avr architecture(s). Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/Read_Battery_Level/Read_Battery_Level.ino:2:10: fatal error: bluefruit.h: No such file or directory
#include <bluefruit.h>
^~~~~~~~~~~~~
compilation terminated.
Result: FAIL
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306ClockDemo/SSD1306ClockDemo.ino:61:27: error: 'D3' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306ClockDemo/SSD1306ClockDemo.ino:61:27: note: suggested alternative: 'A3'
SSD1306Wire display(0x3c, D3, D5);
^~
A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306ClockDemo/SSD1306ClockDemo.ino:61:31: error: 'D5' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306ClockDemo/SSD1306ClockDemo.ino:61:31: note: suggested alternative: 'A5'
SSD1306Wire display(0x3c, D3, D5);
^~
A5
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306DrawingDemo/SSD1306DrawingDemo.ino:34:10: fatal error: nRF_SSD1306Wire.h : No such file or directory
#include "nRF_SSD1306Wire.h " // legacy include: `#include "nRF_SSD1306.h "`
^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on avr architecture(s). Sketch uses 35544 bytes (110%) of program storage space. Maximum is 32256 bytes. Global variables use 715 bytes (34%) of dynamic memory, leaving 1333 bytes for local variables. Maximum is 2048 bytes. Sketch too big; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing it.
Result: FAIL
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:37:28: error: 'D3' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:37:28: note: suggested alternative: 'A3'
SSD1306Wire display(0x3c, D3, D5);
^~
A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:37:32: error: 'D5' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:37:32: note: suggested alternative: 'A5'
SSD1306Wire display(0x3c, D3, D5);
^~
A5
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:38:29: error: 'D1' was not declared in this scope
SSD1306Wire display2(0x3c, D1, D2);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:38:29: note: suggested alternative: 'A1'
SSD1306Wire display2(0x3c, D1, D2);
^~
A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:38:33: error: 'D2' was not declared in this scope
SSD1306Wire display2(0x3c, D1, D2);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:38:33: note: suggested alternative: 'A2'
SSD1306Wire display2(0x3c, D1, D2);
^~
A2
Result: FAIL
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306UiDemo/SSD1306UiDemo.ino:61:28: error: 'D3' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306UiDemo/SSD1306UiDemo.ino:61:28: note: suggested alternative: 'A3'
SSD1306Wire display(0x3c, D3, D5);
^~
A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306UiDemo/SSD1306UiDemo.ino:61:32: error: 'D5' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306UiDemo/SSD1306UiDemo.ino:61:32: note: suggested alternative: 'A5'
SSD1306Wire display(0x3c, D3, D5);
^~
A5
Result: PASS
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/Read_Battery_Level/Read_Battery_Level.ino:2:10: fatal error: bluefruit.h: No such file or directory
#include <bluefruit.h>
^~~~~~~~~~~~~
compilation terminated.
Result: FAIL
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306ClockDemo/SSD1306ClockDemo.ino:61:27: error: 'D3' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306ClockDemo/SSD1306ClockDemo.ino:61:27: note: suggested alternative: 'A3'
SSD1306Wire display(0x3c, D3, D5);
^~
A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306ClockDemo/SSD1306ClockDemo.ino:61:31: error: 'D5' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306ClockDemo/SSD1306ClockDemo.ino:61:31: note: suggested alternative: 'A5'
SSD1306Wire display(0x3c, D3, D5);
^~
A5
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306DrawingDemo/SSD1306DrawingDemo.ino:34:10: fatal error: nRF_SSD1306Wire.h : No such file or directory
#include "nRF_SSD1306Wire.h " // legacy include: `#include "nRF_SSD1306.h "`
^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306SimpleDemo/SSD1306SimpleDemo.ino:48:27: error: 'SDA' was not declared in this scope
SSD1306Wire display(0x3c, SDA, SCL); // ADDRESS, SDA, SCL - SDA and SCL usually populate automatically based on your board's pins_arduino.h
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306SimpleDemo/SSD1306SimpleDemo.ino:48:32: error: 'SCL' was not declared in this scope
SSD1306Wire display(0x3c, SDA, SCL); // ADDRESS, SDA, SCL - SDA and SCL usually populate automatically based on your board's pins_arduino.h
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306SimpleDemo/SSD1306SimpleDemo.ino:48:32: note: suggested alternative: 'SCK'
SSD1306Wire display(0x3c, SDA, SCL); // ADDRESS, SDA, SCL - SDA and SCL usually populate automatically based on your board's pins_arduino.h
^~~
SCK
Result: FAIL
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:37:28: error: 'D3' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:37:28: note: suggested alternative: 'A3'
SSD1306Wire display(0x3c, D3, D5);
^~
A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:37:32: error: 'D5' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:37:32: note: suggested alternative: 'A5'
SSD1306Wire display(0x3c, D3, D5);
^~
A5
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:38:29: error: 'D1' was not declared in this scope
SSD1306Wire display2(0x3c, D1, D2);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:38:29: note: suggested alternative: 'A1'
SSD1306Wire display2(0x3c, D1, D2);
^~
A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:38:33: error: 'D2' was not declared in this scope
SSD1306Wire display2(0x3c, D1, D2);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:38:33: note: suggested alternative: 'A2'
SSD1306Wire display2(0x3c, D1, D2);
^~
A2
Result: FAIL
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306UiDemo/SSD1306UiDemo.ino:61:28: error: 'D3' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306UiDemo/SSD1306UiDemo.ino:61:28: note: suggested alternative: 'A3'
SSD1306Wire display(0x3c, D3, D5);
^~
A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306UiDemo/SSD1306UiDemo.ino:61:32: error: 'D5' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306UiDemo/SSD1306UiDemo.ino:61:32: note: suggested alternative: 'A5'
SSD1306Wire display(0x3c, D3, D5);
^~
A5
Result: PASS
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes. Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/Read_Battery_Level/Read_Battery_Level.ino:2:10: fatal error: bluefruit.h: No such file or directory
#include <bluefruit.h>
^~~~~~~~~~~~~
compilation terminated.
Result: FAIL
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306ClockDemo/SSD1306ClockDemo.ino:61:27: error: 'D3' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306ClockDemo/SSD1306ClockDemo.ino:61:27: note: suggested alternative: 'A3'
SSD1306Wire display(0x3c, D3, D5);
^~
A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306ClockDemo/SSD1306ClockDemo.ino:61:31: error: 'D5' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306ClockDemo/SSD1306ClockDemo.ino:61:31: note: suggested alternative: 'A5'
SSD1306Wire display(0x3c, D3, D5);
^~
A5
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306DrawingDemo/SSD1306DrawingDemo.ino:34:10: fatal error: nRF_SSD1306Wire.h : No such file or directory
#include "nRF_SSD1306Wire.h " // legacy include: `#include "nRF_SSD1306.h "`
^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: PASS
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 37209 bytes (75%) of program storage space. Maximum is 49152 bytes. Global variables use 545 bytes (8%) of dynamic memory, leaving 5599 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:37:28: error: 'D3' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:37:28: note: suggested alternative: 'A3'
SSD1306Wire display(0x3c, D3, D5);
^~
A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:37:32: error: 'D5' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:37:32: note: suggested alternative: 'A5'
SSD1306Wire display(0x3c, D3, D5);
^~
A5
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:38:29: error: 'D1' was not declared in this scope
SSD1306Wire display2(0x3c, D1, D2);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:38:29: note: suggested alternative: 'A1'
SSD1306Wire display2(0x3c, D1, D2);
^~
A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:38:33: error: 'D2' was not declared in this scope
SSD1306Wire display2(0x3c, D1, D2);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:38:33: note: suggested alternative: 'A2'
SSD1306Wire display2(0x3c, D1, D2);
^~
A2
Result: FAIL
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306UiDemo/SSD1306UiDemo.ino:61:28: error: 'D3' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306UiDemo/SSD1306UiDemo.ino:61:28: note: suggested alternative: 'A3'
SSD1306Wire display(0x3c, D3, D5);
^~
A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306UiDemo/SSD1306UiDemo.ino:61:32: error: 'D5' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306UiDemo/SSD1306UiDemo.ino:61:32: note: suggested alternative: 'A5'
SSD1306Wire display(0x3c, D3, D5);
^~
A5
Result: PASS
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/Read_Battery_Level/Read_Battery_Level.ino:2:10: fatal error: bluefruit.h: No such file or directory
#include <bluefruit.h>
^~~~~~~~~~~~~
compilation terminated.
Result: FAIL
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306ClockDemo/SSD1306ClockDemo.ino:61:27: error: 'D3' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306ClockDemo/SSD1306ClockDemo.ino:61:27: note: suggested alternative: 'A3'
SSD1306Wire display(0x3c, D3, D5);
^~
A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306ClockDemo/SSD1306ClockDemo.ino:61:31: error: 'D5' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306ClockDemo/SSD1306ClockDemo.ino:61:31: note: suggested alternative: 'A5'
SSD1306Wire display(0x3c, D3, D5);
^~
A5
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306DrawingDemo/SSD1306DrawingDemo.ino:34:10: fatal error: nRF_SSD1306Wire.h : No such file or directory
#include "nRF_SSD1306Wire.h " // legacy include: `#include "nRF_SSD1306.h "`
^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: PASS
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 41476 bytes (15%) of program storage space. Maximum is 262144 bytes. Global variables use 3684 bytes (11%) of dynamic memory, leaving 29084 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:37:28: error: 'D3' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:37:28: note: suggested alternative: 'A3'
SSD1306Wire display(0x3c, D3, D5);
^~
A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:37:32: error: 'D5' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:37:32: note: suggested alternative: 'A5'
SSD1306Wire display(0x3c, D3, D5);
^~
A5
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:38:29: error: 'D1' was not declared in this scope
SSD1306Wire display2(0x3c, D1, D2);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:38:29: note: suggested alternative: 'A1'
SSD1306Wire display2(0x3c, D1, D2);
^~
A1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:38:33: error: 'D2' was not declared in this scope
SSD1306Wire display2(0x3c, D1, D2);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306TwoScreenDemo/SSD1306TwoScreenDemo.ino:38:33: note: suggested alternative: 'A2'
SSD1306Wire display2(0x3c, D1, D2);
^~
A2
Result: FAIL
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306UiDemo/SSD1306UiDemo.ino:61:28: error: 'D3' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306UiDemo/SSD1306UiDemo.ino:61:28: note: suggested alternative: 'A3'
SSD1306Wire display(0x3c, D3, D5);
^~
A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306UiDemo/SSD1306UiDemo.ino:61:32: error: 'D5' was not declared in this scope
SSD1306Wire display(0x3c, D3, D5);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306UiDemo/SSD1306UiDemo.ino:61:32: note: suggested alternative: 'A5'
SSD1306Wire display(0x3c, D3, D5);
^~
A5
Result: PASS
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 198742 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13096 bytes (3%) of dynamic memory, leaving 314584 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/Read_Battery_Level/Read_Battery_Level.ino:2:23: fatal error: bluefruit.h: No such file or directory compilation terminated.
Result: PASS
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 245746 bytes (18%) of program storage space. Maximum is 1310720 bytes. Global variables use 14400 bytes (4%) of dynamic memory, leaving 313280 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/nRF52_OLED/examples/SSD1306DrawingDemo/SSD1306DrawingDemo.ino:34:77: fatal error: nRF_SSD1306Wire.h : No such file or directory compilation terminated.
Result: PASS
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 242230 bytes (18%) of program storage space. Maximum is 1310720 bytes. Global variables use 14264 bytes (4%) of dynamic memory, leaving 313416 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 223146 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 14272 bytes (4%) of dynamic memory, leaving 313408 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library nRF52_OLED claims to run on nordicnrf52, nrf52 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 246198 bytes (18%) of program storage space. Maximum is 1310720 bytes. Global variables use 14328 bytes (4%) of dynamic memory, leaving 313352 bytes for local variables. Maximum is 327680 bytes.