optoma - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

optoma

Version: 0.1.2
More details

Compatibility matrix

optoma_test

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 1332 bytes (4%) of program storage space. Maximum is 32256 bytes.
Global variables use 184 bytes (8%) of dynamic memory, leaving 1864 bytes for local variables. Maximum is 2048 bytes.

examples/optoma_test

Result: PASS

Sketch uses 2350 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 205 bytes (10%) of dynamic memory, leaving 1843 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/optoma_test

Result: PASS

Sketch uses 79176 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43464 bytes (16%) of dynamic memory, leaving 226872 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 2614 bytes (5%) of program storage space. Maximum is 49152 bytes.
Global variables use 177 bytes (2%) of dynamic memory, leaving 5967 bytes for local variables. Maximum is 6144 bytes.

examples/optoma_test

Result: PASS

Sketch uses 3516 bytes (7%) of program storage space. Maximum is 49152 bytes.
Global variables use 186 bytes (3%) of dynamic memory, leaving 5958 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

In file included from /tmp/arduino-testlib131920734/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/optoma/optoma.h:15:35: error: could not convert '& SerialUSB' from 'Serial_*' to 'arduino::HardwareSerial*'
   Optoma(HardwareSerial* stream = &Serial);

examples/optoma_test

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/optoma/examples/optoma_test/optoma_test.ino:13:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/optoma/optoma.h:15:35: error: could not convert '& SerialUSB' from 'Serial_*' to 'arduino::HardwareSerial*'
   Optoma(HardwareSerial* stream = &Serial);
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/optoma/examples/optoma_test/optoma_test.ino:15:8: error: cannot convert 'Serial_*' to 'arduino::HardwareSerial*' for argument '1' to 'Optoma::Optoma(arduino::HardwareSerial*)'
 Optoma beamer;
        ^~~~~~

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 200462 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13192 bytes (4%) of dynamic memory, leaving 314488 bytes for local variables. Maximum is 327680 bytes.

examples/optoma_test

Result: PASS

Sketch uses 205014 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13440 bytes (4%) of dynamic memory, leaving 314240 bytes for local variables. Maximum is 327680 bytes.