runningAngle - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

runningAngle

Version: 0.1.3
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	runningAngle	time-add
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	PASS	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	PASS	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	PASS	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/runningAngle

Result: PASS

Sketch uses 5678 bytes (17%) of program storage space. Maximum is 32256 bytes.
Global variables use 438 bytes (21%) of dynamic memory, leaving 1610 bytes for local variables. Maximum is 2048 bytes.

examples/time-add

Result: PASS

Sketch uses 4426 bytes (13%) of program storage space. Maximum is 32256 bytes.
Global variables use 263 bytes (12%) of dynamic memory, leaving 1785 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/runningAngle

Result: PASS

Sketch uses 83940 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43452 bytes (16%) of dynamic memory, leaving 226884 bytes for local variables. Maximum is 270336 bytes.

examples/time-add

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:63:5: error: 'TCCR1A' was not declared in this scope
     TCCR1A = 0;
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:64:5: error: 'TCCR1B' was not declared in this scope
     TCCR1B = _BV(CS10);
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:64:18: error: 'CS10' was not declared in this scope
     TCCR1B = _BV(CS10);
                  ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:64:18: note: suggested alternative: 'B110'
     TCCR1B = _BV(CS10);
                  ^~~~
                  B110
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:64:14: error: '_BV' was not declared in this scope
     TCCR1B = _BV(CS10);
              ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:64:14: note: suggested alternative: '_B'
     TCCR1B = _BV(CS10);
              ^~~
              _B
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:72:31: error: 'TCNT1' was not declared in this scope
         uint16_t start_time = TCNT1;
                               ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:72:31: note: suggested alternative: 'SCNd16'
         uint16_t start_time = TCNT1;
                               ^~~~~
                               SCNd16
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:102:5: error: 'cli' was not declared in this scope
     cli();
     ^~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/runningAngle

Result: PASS

Sketch uses 6382 bytes (12%) of program storage space. Maximum is 49152 bytes.
Global variables use 185 bytes (3%) of dynamic memory, leaving 5959 bytes for local variables. Maximum is 6144 bytes.

examples/time-add

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:63:5: error: 'TCCR1A' was not declared in this scope
     TCCR1A = 0;
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:63:5: note: suggested alternative: 'TCB1'
     TCCR1A = 0;
     ^~~~~~
     TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:64:5: error: 'TCCR1B' was not declared in this scope
     TCCR1B = _BV(CS10);
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:64:5: note: suggested alternative: 'TCB1'
     TCCR1B = _BV(CS10);
     ^~~~~~
     TCB1
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-639C13545551CAEC9C51E5413C3AEA6F/sketch/time-add.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:64:18: error: 'CS10' was not declared in this scope
     TCCR1B = _BV(CS10);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:64:18: note: suggested alternative: 'B110'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:72:31: error: 'TCNT1' was not declared in this scope
         uint16_t start_time = TCNT1;
                               ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:72:31: note: suggested alternative: 'TCB1'
         uint16_t start_time = TCNT1;
                               ^~~~~
                               TCB1

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/runningAngle

Result: PASS

Sketch uses 25668 bytes (9%) of program storage space. Maximum is 262144 bytes.
Global variables use 3004 bytes (9%) of dynamic memory, leaving 29764 bytes for local variables. Maximum is 32768 bytes.

examples/time-add

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:63:5: error: 'TCCR1A' was not declared in this scope
     TCCR1A = 0;
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:63:5: note: suggested alternative: 'TCC1'
     TCCR1A = 0;
     ^~~~~~
     TCC1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:64:5: error: 'TCCR1B' was not declared in this scope
     TCCR1B = _BV(CS10);
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:64:5: note: suggested alternative: 'TCC1'
     TCCR1B = _BV(CS10);
     ^~~~~~
     TCC1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:64:18: error: 'CS10' was not declared in this scope
     TCCR1B = _BV(CS10);
                  ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:64:18: note: suggested alternative: 'SS1'
     TCCR1B = _BV(CS10);
                  ^~~~
                  SS1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:64:14: error: '_BV' was not declared in this scope
     TCCR1B = _BV(CS10);
              ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:64:14: note: suggested alternative: '_B'
     TCCR1B = _BV(CS10);
              ^~~
              _B
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:72:31: error: 'TCNT1' was not declared in this scope
         uint16_t start_time = TCNT1;
                               ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:72:31: note: suggested alternative: 'TCC1'
         uint16_t start_time = TCNT1;
                               ^~~~~
                               TCC1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:102:5: error: 'cli' was not declared in this scope
     cli();
     ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:102:5: note: suggested alternative: 'Gclk'
     cli();
     ^~~
     Gclk

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 197768 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13092 bytes (3%) of dynamic memory, leaving 314588 bytes for local variables. Maximum is 327680 bytes.

examples/runningAngle

Result: PASS

Sketch uses 206574 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13432 bytes (4%) of dynamic memory, leaving 314248 bytes for local variables. Maximum is 327680 bytes.

examples/time-add

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:63:5: error: 'TCCR1A' was not declared in this scope
     TCCR1A = 0;
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:64:5: error: 'TCCR1B' was not declared in this scope
     TCCR1B = _BV(CS10);
     ^
In file included from /tmp/arduino-sketch-639C13545551CAEC9C51E5413C3AEA6F/sketch/time-add.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:64:18: error: 'CS10' was not declared in this scope
     TCCR1B = _BV(CS10);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:99:25: note: in definition of macro '_BV'
 #define _BV(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/runningAngle/examples/time-add/time-add.ino:72:31: error: 'TCNT1' was not declared in this scope
         uint16_t start_time = TCNT1;
                               ^