vbus-arduino - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

vbus-arduino

Compatibility matrix

Board	Claims compatibility	Inclusion	HA_Integration	Read_VBUS_Data
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	No	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	No	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 1972 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 344 bytes (16%) of dynamic memory, leaving 1704 bytes for local variables. Maximum is 2048 bytes.

examples/HA_Integration

Result: PASS

Sketch uses 11926 bytes (36%) of program storage space. Maximum is 32256 bytes.
Global variables use 685 bytes (33%) of dynamic memory, leaving 1363 bytes for local variables. Maximum is 2048 bytes.

examples/Read_VBUS_Data

Result: PASS

Sketch uses 11442 bytes (35%) of program storage space. Maximum is 32256 bytes.
Global variables use 823 bytes (40%) of dynamic memory, leaving 1225 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

WARNING: library vbus-arduino claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/vbus-arduino/src/VBUSDecoder.h:20:0,
                 from /tmp/arduino-testlib259193559/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.h: In static member function 'static void AltSoftSerial::begin(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.h:39:25: error: 'F_CPU' was not declared in this scope
 #define ALTSS_BASE_FREQ F_CPU
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.h:47:43: note: in expansion of macro 'ALTSS_BASE_FREQ'
  static void begin(uint32_t baud) { init((ALTSS_BASE_FREQ + baud / 2) / baud); }
                                           ^~~~~~~~~~~~~~~
Multiple libraries were found for "AltSoftSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AltSoftSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800

examples/HA_Integration

Result: FAIL

WARNING: library vbus-arduino claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/vbus-arduino/src/VBUSDecoder.h:20:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/vbus-arduino/examples/HA_Integration/HA_Integration.ino:15:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.h: In static member function 'static void AltSoftSerial::begin(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.h:39:25: error: 'F_CPU' was not declared in this scope
 #define ALTSS_BASE_FREQ F_CPU
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.h:47:43: note: in expansion of macro 'ALTSS_BASE_FREQ'
  static void begin(uint32_t baud) { init((ALTSS_BASE_FREQ + baud / 2) / baud); }
                                           ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/vbus-arduino/examples/HA_Integration/HA_Integration.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/vbus-arduino/examples/HA_Integration/HA_Integration.ino:28:19: error: 'INTERNAL' was not declared in this scope
   analogReference(INTERNAL);
                   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/vbus-arduino/examples/HA_Integration/HA_Integration.ino:28:19: note: suggested alternative: 'SERIAL'
   analogReference(INTERNAL);
                   ^~~~~~~~
                   SERIAL
Multiple libraries were found for "AltSoftSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AltSoftSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800

examples/Read_VBUS_Data

Result: FAIL

WARNING: library vbus-arduino claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/vbus-arduino/src/VBUSDecoder.h:20:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/vbus-arduino/examples/Read_VBUS_Data/Read_VBUS_Data.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.h: In static member function 'static void AltSoftSerial::begin(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.h:39:25: error: 'F_CPU' was not declared in this scope
 #define ALTSS_BASE_FREQ F_CPU
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.h:47:43: note: in expansion of macro 'ALTSS_BASE_FREQ'
  static void begin(uint32_t baud) { init((ALTSS_BASE_FREQ + baud / 2) / baud); }
                                           ^~~~~~~~~~~~~~~
Multiple libraries were found for "AltSoftSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AltSoftSerial

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL

WARNING: library vbus-arduino claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:35:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/config/AltSoftSerial_Boards.h:136:2: error: #error "Please define your board timer and pins"
 #error "Please define your board timer and pins"
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
   CONFIG_TIMER_NOPRESCALE();
   ^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
    CONFIG_TIMER_PRESCALE_8();
    ^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
  pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
          ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
  pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
          ^~~~~~~~~~~~~~~~~
          INPUT_PULLDOWN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
  digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
               ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
  ENABLE_INT_INPUT_CAPTURE();
  ^~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
  DISABLE_INT_COMPARE_B();
  ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
  DISABLE_INT_INPUT_CAPTURE();
  ^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
  DISABLE_INT_COMPARE_A();
  ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
   ENABLE_INT_COMPARE_A();
   ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
   CONFIG_MATCH_CLEAR();
   ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
   SET_COMPARE_A(GET_TIMER_COUNT() + 16);
                 ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:149:17: note: suggested alternative: 'PWM_TIMER_COMPARE'
   SET_COMPARE_A(GET_TIMER_COUNT() + 16);
                 ^~~~~~~~~~~~~~~
                 PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
   SET_COMPARE_A(GET_TIMER_COUNT() + 16);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In function 'void COMPARE_A_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:162:11: error: 'GET_COMPARE_A' was not declared in this scope
  target = GET_COMPARE_A();
           ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:173:5: error: 'CONFIG_MATCH_SET' was not declared in this scope
     CONFIG_MATCH_SET();
     ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:175:5: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
     CONFIG_MATCH_CLEAR();
     ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:177:4: error: 'SET_COMPARE_A' was not declared in this scope
    SET_COMPARE_A(target);
    ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:191:4: error: 'SET_COMPARE_A' was not declared in this scope
    SET_COMPARE_A(target + ticks_per_bit);
    ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:194:4: error: 'CONFIG_MATCH_NORMAL' was not declared in this scope
    CONFIG_MATCH_NORMAL();
    ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:195:4: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
    DISABLE_INT_COMPARE_A();
    ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:202:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
   CONFIG_MATCH_CLEAR();
   ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:204:4: error: 'SET_COMPARE_A' was not declared in this scope
    SET_COMPARE_A(target + ticks_per_bit);
    ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:206:18: error: 'GET_TIMER_COUNT' was not declared in this scope
    SET_COMPARE_A(GET_TIMER_COUNT() + 16);
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:206:18: note: suggested alternative: 'PWM_TIMER_COMPARE'
    SET_COMPARE_A(GET_TIMER_COUNT() + 16);
                  ^~~~~~~~~~~~~~~
                  PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:206:4: error: 'SET_COMPARE_A' was not declared in this scope
    SET_COMPARE_A(GET_TIMER_COUNT() + 16);
    ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In function 'void CAPTURE_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:228:12: error: 'GET_INPUT_CAPTURE' was not declared in this scope
  capture = GET_INPUT_CAPTURE();
            ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:231:3: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
   CONFIG_CAPTURE_FALLING_EDGE();
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:234:3: error: 'CONFIG_CAPTURE_RISING_EDGE' was not declared in this scope
   CONFIG_CAPTURE_RISING_EDGE();
   ^~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:241:4: error: 'SET_COMPARE_B' was not declared in this scope
    SET_COMPARE_B(end);
    ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:242:4: error: 'ENABLE_INT_COMPARE_B' was not declared in this scope
    ENABLE_INT_COMPARE_B();
    ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:256:5: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
     DISABLE_INT_COMPARE_B();
     ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:263:5: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
     CONFIG_CAPTURE_FALLING_EDGE();
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In function 'void COMPARE_B_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:279:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
  DISABLE_INT_COMPARE_B();
  ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:280:2: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
  CONFIG_CAPTURE_FALLING_EDGE();
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Multiple libraries were found for "AltSoftSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AltSoftSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800

examples/HA_Integration

Result: FAIL

WARNING: library vbus-arduino claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:35:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/config/AltSoftSerial_Boards.h:136:2: error: #error "Please define your board timer and pins"
 #error "Please define your board timer and pins"
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
   CONFIG_TIMER_NOPRESCALE();
   ^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
    CONFIG_TIMER_PRESCALE_8();
    ^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
  pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
          ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
  pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
          ^~~~~~~~~~~~~~~~~
          INPUT_PULLDOWN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
  digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
               ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
  ENABLE_INT_INPUT_CAPTURE();
  ^~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
  DISABLE_INT_COMPARE_B();
  ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
  DISABLE_INT_INPUT_CAPTURE();
  ^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
  DISABLE_INT_COMPARE_A();
  ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
   ENABLE_INT_COMPARE_A();
   ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
   CONFIG_MATCH_CLEAR();
   ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
   SET_COMPARE_A(GET_TIMER_COUNT() + 16);
                 ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:149:17: note: suggested alternative: 'PWM_TIMER_COMPARE'
   SET_COMPARE_A(GET_TIMER_COUNT() + 16);
                 ^~~~~~~~~~~~~~~
                 PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
   SET_COMPARE_A(GET_TIMER_COUNT() + 16);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In function 'void COMPARE_A_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:162:11: error: 'GET_COMPARE_A' was not declared in this scope
  target = GET_COMPARE_A();
           ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:173:5: error: 'CONFIG_MATCH_SET' was not declared in this scope
     CONFIG_MATCH_SET();
     ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:175:5: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
     CONFIG_MATCH_CLEAR();
     ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:177:4: error: 'SET_COMPARE_A' was not declared in this scope
    SET_COMPARE_A(target);
    ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:191:4: error: 'SET_COMPARE_A' was not declared in this scope
    SET_COMPARE_A(target + ticks_per_bit);
    ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:194:4: error: 'CONFIG_MATCH_NORMAL' was not declared in this scope
    CONFIG_MATCH_NORMAL();
    ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:195:4: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
    DISABLE_INT_COMPARE_A();
    ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:202:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
   CONFIG_MATCH_CLEAR();
   ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:204:4: error: 'SET_COMPARE_A' was not declared in this scope
    SET_COMPARE_A(target + ticks_per_bit);
    ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:206:18: error: 'GET_TIMER_COUNT' was not declared in this scope
    SET_COMPARE_A(GET_TIMER_COUNT() + 16);
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:206:18: note: suggested alternative: 'PWM_TIMER_COMPARE'
    SET_COMPARE_A(GET_TIMER_COUNT() + 16);
                  ^~~~~~~~~~~~~~~
                  PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:206:4: error: 'SET_COMPARE_A' was not declared in this scope
    SET_COMPARE_A(GET_TIMER_COUNT() + 16);
    ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In function 'void CAPTURE_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:228:12: error: 'GET_INPUT_CAPTURE' was not declared in this scope
  capture = GET_INPUT_CAPTURE();
            ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:231:3: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
   CONFIG_CAPTURE_FALLING_EDGE();
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:234:3: error: 'CONFIG_CAPTURE_RISING_EDGE' was not declared in this scope
   CONFIG_CAPTURE_RISING_EDGE();
   ^~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:241:4: error: 'SET_COMPARE_B' was not declared in this scope
    SET_COMPARE_B(end);
    ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:242:4: error: 'ENABLE_INT_COMPARE_B' was not declared in this scope
    ENABLE_INT_COMPARE_B();
    ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:256:5: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
     DISABLE_INT_COMPARE_B();
     ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:263:5: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
     CONFIG_CAPTURE_FALLING_EDGE();
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In function 'void COMPARE_B_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:279:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
  DISABLE_INT_COMPARE_B();
  ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:280:2: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
  CONFIG_CAPTURE_FALLING_EDGE();
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Multiple libraries were found for "AltSoftSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AltSoftSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800

examples/Read_VBUS_Data

Result: FAIL

WARNING: library vbus-arduino claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:35:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/config/AltSoftSerial_Boards.h:136:2: error: #error "Please define your board timer and pins"
 #error "Please define your board timer and pins"
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::init(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:74:3: error: 'CONFIG_TIMER_NOPRESCALE' was not declared in this scope
   CONFIG_TIMER_NOPRESCALE();
   ^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:79:4: error: 'CONFIG_TIMER_PRESCALE_8' was not declared in this scope
    CONFIG_TIMER_PRESCALE_8();
    ^~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:104:10: error: 'INPUT_CAPTURE_PIN' was not declared in this scope
  pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
          ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:104:10: note: suggested alternative: 'INPUT_PULLDOWN'
  pinMode(INPUT_CAPTURE_PIN, INPUT_PULLUP);
          ^~~~~~~~~~~~~~~~~
          INPUT_PULLDOWN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:105:15: error: 'OUTPUT_COMPARE_A_PIN' was not declared in this scope
  digitalWrite(OUTPUT_COMPARE_A_PIN, HIGH);
               ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:113:2: error: 'ENABLE_INT_INPUT_CAPTURE' was not declared in this scope
  ENABLE_INT_INPUT_CAPTURE();
  ^~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:118:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
  DISABLE_INT_COMPARE_B();
  ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:119:2: error: 'DISABLE_INT_INPUT_CAPTURE' was not declared in this scope
  DISABLE_INT_INPUT_CAPTURE();
  ^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:122:2: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
  DISABLE_INT_COMPARE_A();
  ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In static member function 'static void AltSoftSerial::writeByte(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:147:3: error: 'ENABLE_INT_COMPARE_A' was not declared in this scope
   ENABLE_INT_COMPARE_A();
   ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:148:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
   CONFIG_MATCH_CLEAR();
   ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:149:17: error: 'GET_TIMER_COUNT' was not declared in this scope
   SET_COMPARE_A(GET_TIMER_COUNT() + 16);
                 ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:149:17: note: suggested alternative: 'PWM_TIMER_COMPARE'
   SET_COMPARE_A(GET_TIMER_COUNT() + 16);
                 ^~~~~~~~~~~~~~~
                 PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:149:3: error: 'SET_COMPARE_A' was not declared in this scope
   SET_COMPARE_A(GET_TIMER_COUNT() + 16);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In function 'void COMPARE_A_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:162:11: error: 'GET_COMPARE_A' was not declared in this scope
  target = GET_COMPARE_A();
           ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:173:5: error: 'CONFIG_MATCH_SET' was not declared in this scope
     CONFIG_MATCH_SET();
     ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:175:5: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
     CONFIG_MATCH_CLEAR();
     ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:177:4: error: 'SET_COMPARE_A' was not declared in this scope
    SET_COMPARE_A(target);
    ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:191:4: error: 'SET_COMPARE_A' was not declared in this scope
    SET_COMPARE_A(target + ticks_per_bit);
    ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:194:4: error: 'CONFIG_MATCH_NORMAL' was not declared in this scope
    CONFIG_MATCH_NORMAL();
    ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:195:4: error: 'DISABLE_INT_COMPARE_A' was not declared in this scope
    DISABLE_INT_COMPARE_A();
    ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:202:3: error: 'CONFIG_MATCH_CLEAR' was not declared in this scope
   CONFIG_MATCH_CLEAR();
   ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:204:4: error: 'SET_COMPARE_A' was not declared in this scope
    SET_COMPARE_A(target + ticks_per_bit);
    ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:206:18: error: 'GET_TIMER_COUNT' was not declared in this scope
    SET_COMPARE_A(GET_TIMER_COUNT() + 16);
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:206:18: note: suggested alternative: 'PWM_TIMER_COMPARE'
    SET_COMPARE_A(GET_TIMER_COUNT() + 16);
                  ^~~~~~~~~~~~~~~
                  PWM_TIMER_COMPARE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:206:4: error: 'SET_COMPARE_A' was not declared in this scope
    SET_COMPARE_A(GET_TIMER_COUNT() + 16);
    ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In function 'void CAPTURE_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:228:12: error: 'GET_INPUT_CAPTURE' was not declared in this scope
  capture = GET_INPUT_CAPTURE();
            ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:231:3: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
   CONFIG_CAPTURE_FALLING_EDGE();
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:234:3: error: 'CONFIG_CAPTURE_RISING_EDGE' was not declared in this scope
   CONFIG_CAPTURE_RISING_EDGE();
   ^~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:241:4: error: 'SET_COMPARE_B' was not declared in this scope
    SET_COMPARE_B(end);
    ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:242:4: error: 'ENABLE_INT_COMPARE_B' was not declared in this scope
    ENABLE_INT_COMPARE_B();
    ^~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:256:5: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
     DISABLE_INT_COMPARE_B();
     ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:263:5: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
     CONFIG_CAPTURE_FALLING_EDGE();
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp: In function 'void COMPARE_B_INTERRUPT()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:279:2: error: 'DISABLE_INT_COMPARE_B' was not declared in this scope
  DISABLE_INT_COMPARE_B();
  ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95/src/AltSoftSerial.cpp:280:2: error: 'CONFIG_CAPTURE_FALLING_EDGE' was not declared in this scope
  CONFIG_CAPTURE_FALLING_EDGE();
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Multiple libraries were found for "AltSoftSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AltSoftSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

WARNING: library vbus-arduino claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Multiple libraries were found for "AltSoftSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/AltSoftSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800

examples/HA_Integration

Result: FAIL

WARNING: library vbus-arduino claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/vbus-arduino/examples/HA_Integration/HA_Integration.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/vbus-arduino/examples/HA_Integration/HA_Integration.ino:28:19: error: 'INTERNAL' was not declared in this scope
   analogReference(INTERNAL);
                   ^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/vbus-arduino/examples/HA_Integration/HA_Integration.ino:28:19: note: suggested alternative: 'AR_INTERNAL'
   analogReference(INTERNAL);
                   ^~~~~~~~
                   AR_INTERNAL
Multiple libraries were found for "AltSoftSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/AltSoftSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800

examples/Read_VBUS_Data

Result: FAIL

WARNING: library vbus-arduino claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Multiple libraries were found for "AltSoftSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/AltSoftSerial

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

WARNING: library vbus-arduino claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Multiple libraries were found for "AltSoftSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AltSoftSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800

examples/HA_Integration

Result: FAIL

WARNING: library vbus-arduino claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/vbus-arduino/examples/HA_Integration/HA_Integration.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/vbus-arduino/examples/HA_Integration/HA_Integration.ino:28:19: error: 'INTERNAL' was not declared in this scope
   analogReference(INTERNAL);
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/vbus-arduino/examples/HA_Integration/HA_Integration.ino:28:27: error: 'analogReference' was not declared in this scope
   analogReference(INTERNAL);
                           ^
Multiple libraries were found for "AltSoftSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AltSoftSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800

examples/Read_VBUS_Data

Result: FAIL

WARNING: library vbus-arduino claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Multiple libraries were found for "AltSoftSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AIS_NB_BC95
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AltSoftSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BareBoneSim800