wdt_samd21 - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

wdt_samd21

Version: 1.0.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	wdt_samd21_demo
arduino:avr:uno 1.8.4	No	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	No	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL

WARNING: library wdt_samd21 claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /tmp/arduino-testlib2993839995/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/src/wdt_samd21.h:49:49: error: 'WDT_CONFIG_PER_2K' was not declared in this scope
 void wdt_init ( unsigned long wdt_config_per =  WDT_CONFIG_PER_2K );
                                                 ^~~~~~~~~~~~~~~~~

examples/wdt_samd21_demo

Result: FAIL

WARNING: library wdt_samd21 claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/src/wdt_samd21.h:49:49: error: 'WDT_CONFIG_PER_2K' was not declared in this scope
 void wdt_init ( unsigned long wdt_config_per =  WDT_CONFIG_PER_2K );
                                                 ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:6:4: error: 'SerialUSB' was not declared in this scope
    SerialUSB.begin ( 9600 );
    ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:6:4: note: suggested alternative: 'Serial'
    SerialUSB.begin ( 9600 );
    ^~~~~~~~~
    Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:12:15: error: 'WDT_CONFIG_PER_2K' was not declared in this scope
    wdt_init ( WDT_CONFIG_PER_2K );
               ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:20:7: error: 'SerialUSB' was not declared in this scope
       SerialUSB.print ( "Iteration " );
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:20:7: note: suggested alternative: 'Serial'
       SerialUSB.print ( "Iteration " );
       ^~~~~~~~~
       Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:28:4: error: 'SerialUSB' was not declared in this scope
    SerialUSB.println ( "Now waiting for 4 seconds ..." );
    ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:28:4: note: suggested alternative: 'Serial'
    SerialUSB.println ( "Now waiting for 4 seconds ..." );
    ^~~~~~~~~
    Serial

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

WARNING: library wdt_samd21 claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /tmp/arduino-testlib2665650842/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/src/wdt_samd21.h:49:49: error: 'WDT_CONFIG_PER_2K' was not declared in this scope
 void wdt_init ( unsigned long wdt_config_per =  WDT_CONFIG_PER_2K );
                                                 ^~~~~~~~~~~~~~~~~

examples/wdt_samd21_demo

Result: FAIL

WARNING: library wdt_samd21 claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/src/wdt_samd21.h:49:49: error: 'WDT_CONFIG_PER_2K' was not declared in this scope
 void wdt_init ( unsigned long wdt_config_per =  WDT_CONFIG_PER_2K );
                                                 ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:12:15: error: 'WDT_CONFIG_PER_2K' was not declared in this scope
    wdt_init ( WDT_CONFIG_PER_2K );
               ^~~~~~~~~~~~~~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL

WARNING: library wdt_samd21 claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /tmp/arduino-testlib2665650842/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/src/wdt_samd21.h:49:49: error: 'WDT_CONFIG_PER_2K' was not declared in this scope
 void wdt_init ( unsigned long wdt_config_per =  WDT_CONFIG_PER_2K );
                                                 ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/src/wdt_samd21.h:49:49: note: suggested alternative: 'USB_CONFIG_POWER_MA'
 void wdt_init ( unsigned long wdt_config_per =  WDT_CONFIG_PER_2K );
                                                 ^~~~~~~~~~~~~~~~~
                                                 USB_CONFIG_POWER_MA

examples/wdt_samd21_demo

Result: FAIL

WARNING: library wdt_samd21 claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/src/wdt_samd21.h:49:49: error: 'WDT_CONFIG_PER_2K' was not declared in this scope
 void wdt_init ( unsigned long wdt_config_per =  WDT_CONFIG_PER_2K );
                                                 ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/src/wdt_samd21.h:49:49: note: suggested alternative: 'USB_CONFIG_POWER_MA'
 void wdt_init ( unsigned long wdt_config_per =  WDT_CONFIG_PER_2K );
                                                 ^~~~~~~~~~~~~~~~~
                                                 USB_CONFIG_POWER_MA
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:6:4: error: 'SerialUSB' was not declared in this scope
    SerialUSB.begin ( 9600 );
    ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:6:4: note: suggested alternative: 'Serial1'
    SerialUSB.begin ( 9600 );
    ^~~~~~~~~
    Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:12:15: error: 'WDT_CONFIG_PER_2K' was not declared in this scope
    wdt_init ( WDT_CONFIG_PER_2K );
               ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:12:15: note: suggested alternative: 'USB_CONFIG_POWER_MA'
    wdt_init ( WDT_CONFIG_PER_2K );
               ^~~~~~~~~~~~~~~~~
               USB_CONFIG_POWER_MA
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:20:7: error: 'SerialUSB' was not declared in this scope
       SerialUSB.print ( "Iteration " );
       ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:20:7: note: suggested alternative: 'Serial1'
       SerialUSB.print ( "Iteration " );
       ^~~~~~~~~
       Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:28:4: error: 'SerialUSB' was not declared in this scope
    SerialUSB.println ( "Now waiting for 4 seconds ..." );
    ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:28:4: note: suggested alternative: 'Serial1'
    SerialUSB.println ( "Now waiting for 4 seconds ..." );
    ^~~~~~~~~
    Serial1

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/wdt_samd21_demo

Result: PASS

Sketch uses 12824 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

WARNING: library wdt_samd21 claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /tmp/arduino-testlib2665650842/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/src/wdt_samd21.h:49:49: error: 'WDT_CONFIG_PER_2K' was not declared in this scope
 void wdt_init ( unsigned long wdt_config_per =  WDT_CONFIG_PER_2K );
                                                 ^

examples/wdt_samd21_demo

Result: FAIL

WARNING: library wdt_samd21 claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/src/wdt_samd21.h:49:49: error: 'WDT_CONFIG_PER_2K' was not declared in this scope
 void wdt_init ( unsigned long wdt_config_per =  WDT_CONFIG_PER_2K );
                                                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:6:4: error: 'SerialUSB' was not declared in this scope
    SerialUSB.begin ( 9600 );
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:12:15: error: 'WDT_CONFIG_PER_2K' was not declared in this scope
    wdt_init ( WDT_CONFIG_PER_2K );
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:20:7: error: 'SerialUSB' was not declared in this scope
       SerialUSB.print ( "Iteration " );
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wdt_samd21/examples/wdt_samd21_demo/wdt_samd21_demo.ino:28:4: error: 'SerialUSB' was not declared in this scope
    SerialUSB.println ( "Now waiting for 4 seconds ..." );
    ^