wm8978-esp32 - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

wm8978-esp32

Version: 1.0.4
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	M5Stack_wm8978
arduino:avr:uno 1.8.4	No	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	No	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL

WARNING: library wm8978-esp32 claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp: In member function 'bool WM8978::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:318:14: error: 'TAG' was not declared in this scope
     ESP_LOGE(TAG, "No WM8978 dac @ i2c address: 0x%X", WM8978_ADDR);
              ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:318:5: error: 'ESP_LOGE' was not declared in this scope
     ESP_LOGE(TAG, "No WM8978 dac @ i2c address: 0x%X", WM8978_ADDR);
     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:318:5: note: suggested alternative: 'M_LOG2E'
     ESP_LOGE(TAG, "No WM8978 dac @ i2c address: 0x%X", WM8978_ADDR);
     ^~~~~~~~
     M_LOG2E
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:323:14: error: 'TAG' was not declared in this scope
     ESP_LOGE(TAG, "WM8978 init err: 0x%X", err);
              ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:323:5: error: 'ESP_LOGE' was not declared in this scope
     ESP_LOGE(TAG, "WM8978 init err: 0x%X", err);
     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:323:5: note: suggested alternative: 'M_LOG2E'
     ESP_LOGE(TAG, "WM8978 init err: 0x%X", err);
     ^~~~~~~~
     M_LOG2E
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp: In member function 'bool WM8978::begin(uint8_t, uint8_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:345:12: error: 'TAG' was not declared in this scope
   ESP_LOGD(TAG, "i2c init sda=%i scl=%i frequency=%i", sda, scl, frequency);
            ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:345:3: error: 'ESP_LOGD' was not declared in this scope
   ESP_LOGD(TAG, "i2c init sda=%i scl=%i frequency=%i", sda, scl, frequency);
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:346:38: error: no matching function for call to 'TwoWire::begin(const uint8_t&, const uint8_t&, const uint32_t&)'
   if (!Wire.begin(sda, scl, frequency)) {
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:53:10: note: candidate: void TwoWire::begin()
     void begin();
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:53:10: note:   candidate expects 0 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:54:10: note: candidate: void TwoWire::begin(uint8_t)
     void begin(uint8_t);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:54:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:55:10: note: candidate: void TwoWire::begin(int)
     void begin(int);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:55:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:347:5: error: 'ESP_LOGE' was not declared in this scope
     ESP_LOGE(TAG, "Wire setup error sda=%i scl=%i frequency=%i", sda, scl, frequency);
     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:347:5: note: suggested alternative: 'M_LOG2E'
     ESP_LOGE(TAG, "Wire setup error sda=%i scl=%i frequency=%i", sda, scl, frequency);
     ^~~~~~~~
     M_LOG2E

examples/M5Stack_wm8978

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio_-_Adafruit_Fork/analyze_fft256.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio_-_Adafruit_Fork/Audio.h:66,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/examples/M5Stack_wm8978/M5Stack_wm8978.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio_-_Adafruit_Fork/AudioStream.h:71:10: fatal error: kinetis.h: No such file or directory
 #include "kinetis.h"
          ^~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "Audio.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio_-_Adafruit_Fork
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_Audio

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

WARNING: library wm8978-esp32 claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp: In member function 'bool WM8978::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:318:14: error: 'TAG' was not declared in this scope
     ESP_LOGE(TAG, "No WM8978 dac @ i2c address: 0x%X", WM8978_ADDR);
              ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:318:5: error: 'ESP_LOGE' was not declared in this scope
     ESP_LOGE(TAG, "No WM8978 dac @ i2c address: 0x%X", WM8978_ADDR);
     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:318:5: note: suggested alternative: 'ESTALE'
     ESP_LOGE(TAG, "No WM8978 dac @ i2c address: 0x%X", WM8978_ADDR);
     ^~~~~~~~
     ESTALE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:323:14: error: 'TAG' was not declared in this scope
     ESP_LOGE(TAG, "WM8978 init err: 0x%X", err);
              ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:323:5: error: 'ESP_LOGE' was not declared in this scope
     ESP_LOGE(TAG, "WM8978 init err: 0x%X", err);
     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:323:5: note: suggested alternative: 'ESTALE'
     ESP_LOGE(TAG, "WM8978 init err: 0x%X", err);
     ^~~~~~~~
     ESTALE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp: In member function 'bool WM8978::begin(uint8_t, uint8_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:345:12: error: 'TAG' was not declared in this scope
   ESP_LOGD(TAG, "i2c init sda=%i scl=%i frequency=%i", sda, scl, frequency);
            ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:345:3: error: 'ESP_LOGD' was not declared in this scope
   ESP_LOGD(TAG, "i2c init sda=%i scl=%i frequency=%i", sda, scl, frequency);
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:346:38: error: no matching function for call to 'arduino::MbedI2C::begin(const uint8_t&, const uint8_t&, const uint32_t&)'
   if (!Wire.begin(sda, scl, frequency)) {
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:39:18: note: candidate: virtual void arduino::MbedI2C::begin()
     virtual void begin();
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:39:18: note:   candidate expects 0 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:43:18: note: candidate: virtual void arduino::MbedI2C::begin(uint8_t)
     virtual void begin(uint8_t address);
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:43:18: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:347:5: error: 'ESP_LOGE' was not declared in this scope
     ESP_LOGE(TAG, "Wire setup error sda=%i scl=%i frequency=%i", sda, scl, frequency);
     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:347:5: note: suggested alternative: 'ESTALE'
     ESP_LOGE(TAG, "Wire setup error sda=%i scl=%i frequency=%i", sda, scl, frequency);
     ^~~~~~~~
     ESTALE

examples/M5Stack_wm8978

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio_-_Adafruit_Fork/analyze_fft256.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio_-_Adafruit_Fork/Audio.h:66,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/examples/M5Stack_wm8978/M5Stack_wm8978.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio_-_Adafruit_Fork/AudioStream.h:71:10: fatal error: kinetis.h: No such file or directory
 #include "kinetis.h"
          ^~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "Audio.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio_-_Adafruit_Fork
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_Audio
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL

WARNING: library wm8978-esp32 claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp: In member function 'bool WM8978::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:318:14: error: 'TAG' was not declared in this scope
     ESP_LOGE(TAG, "No WM8978 dac @ i2c address: 0x%X", WM8978_ADDR);
              ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:318:5: error: 'ESP_LOGE' was not declared in this scope
     ESP_LOGE(TAG, "No WM8978 dac @ i2c address: 0x%X", WM8978_ADDR);
     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:318:5: note: suggested alternative: 'TEST_MODE'
     ESP_LOGE(TAG, "No WM8978 dac @ i2c address: 0x%X", WM8978_ADDR);
     ^~~~~~~~
     TEST_MODE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:323:14: error: 'TAG' was not declared in this scope
     ESP_LOGE(TAG, "WM8978 init err: 0x%X", err);
              ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:323:5: error: 'ESP_LOGE' was not declared in this scope
     ESP_LOGE(TAG, "WM8978 init err: 0x%X", err);
     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:323:5: note: suggested alternative: 'TEST_MODE'
     ESP_LOGE(TAG, "WM8978 init err: 0x%X", err);
     ^~~~~~~~
     TEST_MODE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp: In member function 'bool WM8978::begin(uint8_t, uint8_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:345:12: error: 'TAG' was not declared in this scope
   ESP_LOGD(TAG, "i2c init sda=%i scl=%i frequency=%i", sda, scl, frequency);
            ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:345:3: error: 'ESP_LOGD' was not declared in this scope
   ESP_LOGD(TAG, "i2c init sda=%i scl=%i frequency=%i", sda, scl, frequency);
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:346:38: error: no matching function for call to 'TwoWire::begin(const uint8_t&, const uint8_t&, const uint32_t&)'
   if (!Wire.begin(sda, scl, frequency)) {
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:52:10: note: candidate: virtual void TwoWire::begin()
     void begin();
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:52:10: note:   candidate expects 0 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:53:10: note: candidate: virtual void TwoWire::begin(uint8_t)
     void begin(uint8_t);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:53:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:54:10: note: candidate: void TwoWire::begin(int)
     void begin(int);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:54:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:347:5: error: 'ESP_LOGE' was not declared in this scope
     ESP_LOGE(TAG, "Wire setup error sda=%i scl=%i frequency=%i", sda, scl, frequency);
     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:347:5: note: suggested alternative: 'TEST_MODE'
     ESP_LOGE(TAG, "Wire setup error sda=%i scl=%i frequency=%i", sda, scl, frequency);
     ^~~~~~~~
     TEST_MODE

examples/M5Stack_wm8978

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio_-_Adafruit_Fork/analyze_fft256.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio_-_Adafruit_Fork/Audio.h:66,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/examples/M5Stack_wm8978/M5Stack_wm8978.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio_-_Adafruit_Fork/AudioStream.h:71:10: fatal error: kinetis.h: No such file or directory
 #include "kinetis.h"
          ^~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "Audio.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio_-_Adafruit_Fork
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_Audio
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

WARNING: library wm8978-esp32 claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp: In member function 'bool WM8978::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:318:14: error: 'TAG' was not declared in this scope
     ESP_LOGE(TAG, "No WM8978 dac @ i2c address: 0x%X", WM8978_ADDR);
              ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:318:5: error: 'ESP_LOGE' was not declared in this scope
     ESP_LOGE(TAG, "No WM8978 dac @ i2c address: 0x%X", WM8978_ADDR);
     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:318:5: note: suggested alternative: 'M_LOG2E'
     ESP_LOGE(TAG, "No WM8978 dac @ i2c address: 0x%X", WM8978_ADDR);
     ^~~~~~~~
     M_LOG2E
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:323:14: error: 'TAG' was not declared in this scope
     ESP_LOGE(TAG, "WM8978 init err: 0x%X", err);
              ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:323:5: error: 'ESP_LOGE' was not declared in this scope
     ESP_LOGE(TAG, "WM8978 init err: 0x%X", err);
     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:323:5: note: suggested alternative: 'M_LOG2E'
     ESP_LOGE(TAG, "WM8978 init err: 0x%X", err);
     ^~~~~~~~
     M_LOG2E
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp: In member function 'bool WM8978::begin(uint8_t, uint8_t, uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:345:12: error: 'TAG' was not declared in this scope
   ESP_LOGD(TAG, "i2c init sda=%i scl=%i frequency=%i", sda, scl, frequency);
            ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:345:3: error: 'ESP_LOGD' was not declared in this scope
   ESP_LOGD(TAG, "i2c init sda=%i scl=%i frequency=%i", sda, scl, frequency);
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:346:38: error: no matching function for call to 'arduino::TwoWire::begin(const uint8_t&, const uint8_t&, const uint32_t&)'
   if (!Wire.begin(sda, scl, frequency)) {
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:36:10: note: candidate: virtual void arduino::TwoWire::begin()
     void begin();
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:36:10: note:   candidate expects 0 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:37:10: note: candidate: void arduino::TwoWire::begin(uint8_t, bool)
     void begin(uint8_t address, bool enableGeneralCall);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:37:10: note:   candidate expects 2 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:38:10: note: candidate: virtual void arduino::TwoWire::begin(uint8_t)
     void begin(uint8_t address) {
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:38:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:347:5: error: 'ESP_LOGE' was not declared in this scope
     ESP_LOGE(TAG, "Wire setup error sda=%i scl=%i frequency=%i", sda, scl, frequency);
     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/src/WM8978.cpp:347:5: note: suggested alternative: 'M_LOG2E'
     ESP_LOGE(TAG, "Wire setup error sda=%i scl=%i frequency=%i", sda, scl, frequency);
     ^~~~~~~~
     M_LOG2E

examples/M5Stack_wm8978

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio_-_Adafruit_Fork/analyze_fft256.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio_-_Adafruit_Fork/Audio.h:66,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/examples/M5Stack_wm8978/M5Stack_wm8978.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio_-_Adafruit_Fork/AudioStream.h:71:10: fatal error: kinetis.h: No such file or directory
 #include "kinetis.h"
          ^~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "Audio.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio_-_Adafruit_Fork
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_Audio

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 202922 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.

examples/M5Stack_wm8978

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio_-_Adafruit_Fork/analyze_fft256.h:31:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio_-_Adafruit_Fork/Audio.h:66,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/wm8978-esp32/examples/M5Stack_wm8978/M5Stack_wm8978.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio_-_Adafruit_Fork/AudioStream.h:71:21: fatal error: kinetis.h: No such file or directory
compilation terminated.
Multiple libraries were found for "Audio.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio_-_Adafruit_Fork
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_Audio
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Audio